ReviewsVortex Venom Glock Mount

ADE Zantitium RD3-015 Red Dot Sight + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS,Non-Aftermarket Slide) Standard, Canik TP9SF and Taurus GX4/G3C/G3 with Factory Steel Sight Pistol

  • ...vetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included).Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo..
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.
Check Stock

ADE Bertrillium RD3-013 Red Dot+Rear Sight Optic Mounting Plate/Adapter for All GLOCK (Non-MOS,Non-Aftermarket Slide) Standard models,Canik TP9SF and Taurus GX4,G3C&G3 with factory steel sights pistol

  • ...e recommend hiring a professional gunsmith.
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo..
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.
Check Stock

Ade Advanced Optics Huracan Green Dot Micro Mini Reflex Sight for Handgun

  • We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base..
  • Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included..
  • It is fits directly to "Optics Ready" pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm..
  • 3 MOA. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail..
  • ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt.
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • ...work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
  • The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex Venom/Viper, Doctor, Burris Fastfire, Shield RMS/RMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spike..
Check Stock

Optic Base Mount Plate for Taurus PT111 Millennium G2 G2c G2s Original G3 Vortex Viper Venom ADE Docter Noblex Red Dot Sight Black

  • The Optic Mount Plate for the PT111 G2, Millennium G2, G2, G2c, G2s, and original G3, or TX22 pistols.
  • Made from aircraft grade aluminum and then hard anodized to mil spec for longevity and scratch resistance.
  • Designed to replace your rear sight, no milling of the slide required No gunsmithing required for this mounting plate.
  • Will work withJPoint, Shield Sight Reflex Mini Sight, Vortex Viper, Vortex Venom, ADE RD3 003, ADE RD3-006A, ADE RD3-006B, Docter/Noblex Sight C,....
  • Includes the Optic Mount Plate Installation hardware and tools.
Check Stock

Ade Advanced Optics RD3-009-2 Red Dot Sights

  • We have made several improvements since it's initial release in 2014. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon..
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
  • Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..
Check Stock

Monstrum 45 Degree Offset Micro Red Dot Mount | Compatible with Venom/Viper/Fastfire/Docter Standard Red Dots

  • For 45 degree offset mounting of a micro red dot sight to your picatinny mounting platform.
  • Compatible with Vortex Venom/Viper, Burriss Fastfire 2/3, TRUGLO TRU-TEC, UTG Micro, and all Docter/Noblex footprint pattern red dots. Please refer to compatibility chart before purchasing..
  • Red dot mount attaches directly to your red dot base using the Docter/Noblex red dot footprint pattern.
  • 45 degree offset design allows for the mounting of a secondary sighting system.
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Piggyback Red Dot Ring Mount for Rifle Scopes | 1 inch | Compatible with Venom/Viper/Fastfire/Docter Standard Red Dots

  • For piggyback mounting of red dot sights as a secondary sighting system directly to your rifle scope tube.
  • Allows for fast transition between your rifle scope and a 1x power red dot optic for use at closer ranges.
  • Micro red dot mount compatible with Vortex Venom/Viper, Burriss Fastfire 2/3, TRUGLO TRU-TEC, UTG Micro, and all Docter/Noblex footprint pattern red dots. Please refer to compatibility chart before purchasing..
  • Ring mount fastens around your scope tube, installing via two set screws and included hex key.
  • All Monstrum mount and accessory products are backed by a lifetime guarantee.
Check Stock

Ade Advanced Optics RD3-006B Green Dot Micro Mini Reflex Sight For Handgun

  • We have made several improvements since it’s initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon..
  • Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
  • 3 MOA. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..
Check Stock

Ade Advanced Optics RD3-006B-2 Green Dot Micro Mini Reflex Sight for Handgun …

  • We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Newly updated front switch designed in Oregon..
  • Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
  • 4 MOA. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..
Check Stock

TRUGLO Dot Optic Mount for Shotguns Universal Rib Mount 4-Post Mount TG8954

  • Compatible with TRUGLO TRU-TEC Micro, Vortex Venom, Burris Fastfire, EOTech MRDS, Meopta Meosight series, and Docter optics and other compatible....
  • Mount a dot-optic to your shotgun's ventilated rib.
  • Fits ventilated ribs, . 236 in. (6mm) to . 395 in. (10mm) rib widths.
  • Optic stays with the barrel and maintains zero when changing barrels for different seasons.
Check Stock