ReviewsVortex Vmx 3t With Eotech

Ade Advanced Optics SW MP Tactical Mini Dotx Sight Pistol Mount Base for Smith & Wesson M&P

  • This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith & Wesson handguns.
  • This mounting plate fits SW Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shield.
  • This mounting plate does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma.
  • This mounting plate fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots..
  • Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots..
Check Stock

Ade Advanced Optics Red Dot Mounting Plate/Base/Adapter for Vortex Venom/Razor/Viper Burris Fastfire,Meopta,Docter Insight to FIT Sig Sauer Standard P320

  • This brand new designed optic mounting plate is to REPLACe the rear sight of pistol. Specially made to fit Sig Sauer Standard P320 Handgun..
  • Only fits standard P320 and P320 compact. It does NOT fit special edition like XCarry, ProCuts, X-5, XCompact, M17, M18 ext(see other listings from....
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots..
  • Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..
Check Stock

Ade Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun

  • Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail..
  • This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot..
  • However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol’s pre-cut is very short...
  • Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Powered by a lithium CR2032 battery.
  • ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..
Check Stock

EOTECH G33 Magnifier

  • Magnification – Fixed 3x magnification in compact design.
  • Quick Transitions – Switch-to-Side mount allows instant transitions between 1x and 3x magnification.
  • Hws Compatible – Works with all EOTECH Holographic Weapon Sights.
  • EOTECH HWS Prestige Warranty – Comes with 10 year limited warranty.
Check Stock

EOTECH G33 Magnifier

  • Magnification – Fixed 3x magnification in compact design.
  • Quick Transitions – Switch-to-Side mount allows instant transitions between 1x and 3x magnification.
  • Hws Compatible – Works with all EOTECH Holographic Weapon Sights.
  • EOTECH HWS Prestige Warranty – Comes with 10 year limited warranty.
Check Stock

Ade Advanced Optics RD3-006B Green Dot Micro Mini Reflex Sight for Handgun with Removeable Pictinny Base

  • We have made several improvements since it’s initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Newly updated front switch designed in Oregon..
  • Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
  • 3 MOA. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..
Check Stock

Ade Advanced Optics Optics Delrin Shims 1.0 Degree for Vortex Venom & Viper Burris Fastfire II III,Red dot Sight

  • Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra....
  • Do not return your "defective" red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the....
  • Fits: Vortex Venom & Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned....
  • Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red....
  • What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out),....
Check Stock

Ade Advanced Optics Huracan Green Dot Micro Mini Reflex Sight for Handgun

  • We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base..
  • Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included..
  • It is fits directly to "Optics Ready" pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm..
  • 3 MOA. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail..
  • ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt.
Check Stock

EOTECH HHS II Holographic Hybrid Sight - EXPS2-2 with G33 Magnifier

  • EOTECH HHS II – Holographic Hybrid Sight includes EXPS2-2 sight with G33 Magnifier.
  • Quick Transitions – Change quickly from close quarter to medium range targets with the included G33 Magnifier and Switch-to-Side mount.
  • Mount – Quick Detach lever fits 1″ Weaver and MIL-STD 1913 Rails.
  • Side Button Operation – Compact design and side button operation consumes minimal rail space. G33.STS is compatible with all EOTech Holographic Weapon Sights.
  • EOTECH HWS Prestige Warranty – Comes with 10 year limited warranty.
Check Stock

Ade Advanced Optics Red Dot Adapter Mounting Plate/Base/Convertor for Vortex Venom/Razor/Viper Burris Fastfire,Meopta,Docter Insight to FIT Sig Sauer P365XL / P365X Handgun

  • The existing optic cut on Sig P365XL and P365X only fits Shield RMS and ADE RD3-018 SPIKE footprint red dot, the existing optic cut does not allow red....
  • This Plate does NOT fit base/standard Sig P365 which does not has a optic cut. This plate does NOT fit red dot footprint such as trijicon rmr, shield....
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots..
  • Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots. It does NOT fit the....
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if....
Check Stock

EOTECH 558 Holographic Weapon Sight

  • EOTECH 558.A65 – Holographic Weapon Sight in black with 68MOA ring & 1 MOA dot reticle.
  • Night Vision Compatible – Works with all Gen 1-3 night vision devices.
  • Mount – Quick Detach lever fits 1″ Weaver and MIL-STD 1913 Rails.
  • Side Button Operation – Ideal for use with a G33 Magnifier.
  • EOTECH HWS Prestige Warranty – Comes with 10 year limited warranty.
Check Stock