ReviewsWafer Housing Terminal

Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover×3, 0.4mm Ender 3 Nozzle×3 and 2 Pair Pneumatic Couplers

  • It's 100% Creality Original Upgrade Assembled Extruder Hotend..
  • Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit..
  • With more terminal housing and pins as spare parts, in case fail installation and waste..
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..
Check Stock

10Pcs DIN Rail Mounted Ground Circuit Connection Terminal Block Screw Clamp Connector (USLKG5N)

  • Type: USLKG2. 5N, Rated voltage/current: 690V/34A..
  • ✯ Material: Nylon PA66 Housing + Alloy Copper Bodies + Nickel-plated Screws..
  • ✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
  • ✯ Lock firmly on the din rail, easy to insert the wire and the screw terminal holds the wires solid. Great use when making a prewired harness..
  • ✯ Application: Distribution boxes/cabinets and other general terminals, such as: home appliances, electronic circuits, machines, etc..
Check Stock

Underground Electrical Box Waterproof IP68 Junction Box ,2 Way Plug Line M20 Coaxial Cable Junction Box Connector Wire Range 5 to 15mm Outdoor External Electric Power Cord Boxes

  • Junction BoxAvailable in 2 way,One in and one out and is delivered with a three-position terminal block.Terminal Block Current: 41A.
  • Terminal Block Voltage: AC 450V .Available Wire Diameter : 5-9mm , 9-12mm,12-15mm..
  • High Quality MaterialsMade of high quality plastic PC housing, it will not crack or fade in Sunlight, durable for years use,corrosion resistant, high temperature resistant, long life..
  • WaterproofIP68 high level waterproof class / Moisture-proof/Dust-proof/ anti-UV 2 Way Plastic Terminal,it can be installed horizontal and vertical as external junction box, suitable for a variety of indoor and outdoor wire connections..
  • Easy to installThe junction box can easily be installed under the ground.The rotaters at each end that close up the rubber around the ends of the cable ,wiring is easy to operate, more convenient and safer..
  • Wide UsabilityThe outdoor junction box suitable for kinds of LED billboards, LED tunnel lights, LED Road landscape lighting, LED outdoor display, LED garden lights..
Check Stock

Bettomshin 1Pcs 90dB Strobe Warning Light Bulb, 12V DC 1W, Industrial Signal Tower with Buzzer Alarm Indicator Lamp for Construction Freight Works LTE1101J Red

  • LED: Our LED lamp beads are UL Listed, each LED is imported from Taiwan. The LED life span up to 100000 hours. Red LED with 5000mcd brightness, Green LED with 9500mcd brightness. LED light-emitting diode is a light source, with stable performance and ideal display effect..
  • BLACK HOUSING & WATERPROOF : Durable black housing to ensure durability and a multilayer seal protects lens from dust and water seal to keep protected from water in harsh weather environments. The waterproof grade is IP65..
  • COBWEB LENS & MODULES: It's made of cobweb and button lens, It can astigmatism, bright bur not dazzling. It has two modules (green and red) of diameter 200 mm(8inch). Each light has a visor for frontal display..
  • WORKING VOLTAGE & EASY INSTALLATION: Operating voltage of DC9-36V.
  • The installation can be horizontal or vertical. Red light to R terminal, green light to G terminal, common is public line..
  • CERTIFICATE & WARRANTY: It’s get the FCC, CE, IP65, RoHS certifications. Two years warranty promise..
Check Stock

LEM Products 1240 Mighty Bite Belt Driven Meat Slicer (8.5-Inch Blade), clear

  • Professional quality aluminum die-cast housing.
  • Easy off knob - use one hand to remove blade.
  • Easy to read thickness dial adjusts from wafer-thin up to .625" thick.
  • Stainless steel 8.5" straight and serrated blades.
  • Clear product guide holds food firmly against blade while keeping hands safe.
  • Sliding meat tray glides effortlessly on polished steel rail.
  • Suctioned rubber feet secure unit to any flat surface.
Check Stock

Bettomshin 1Pcs 90dB Strobe Warning Light Bulb, 220V DC 10W, Industrial Signal Tower with Buzzer Alarm Indicator Lamp for Construction Freight Works LTE-2071J Red

  • LED: Our LED lamp beads are UL Listed, each LED is imported from Taiwan. The LED life span up to 100000 hours. Red LED with 6300mcd brightness, Green LED with 12480mcd brightness. LED light-emitting diode is a light source, with stable performance and ideal display effect..
  • BLACK HOUSING & WATERPROOF : Durable black housing to ensure durability and a multilayer seal protects lens from dust and water seal to keep protected from water in harsh weather environments. The waterproof grade is IP65..
  • COBWEB LENS & MODULES : It's made of cobweb and button lens, It can astigmatism, bright but not dazzling. It has two modules (green and red) of diameter 100 mm(4inch). Each light has a visor for frontal display..
  • WORKING VOLTAGE & EASY INSTALLATION: Operating voltage of 86-265 VAC, 50/60Hz.
  • The installation can be horizontal or vertical. Red light to R terminal, green light to G terminal, common is public line..
  • CERTIFICATE & WARRANTY: It’s get the FCC, CE, IP65, RoHS certifications. Two years warranty promise..
Check Stock

Frienda 6 Pieces 2-4 Gauge 175A Battery Quick Connector 12-36V Battery Quick Disconnect Wire Harness Plug Kit Battery Quick Connector Disconnect Plug for Motor Winch Trailer (Red)

  • Universal:Widely used in connect/disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups,trailers, or for any purpose requiring a high-current. Rated currents (amperes): 175 A.Rated Voltage: 600 V.Suitable for 1-2 Gauge..
  • Safe: Both ends are suitable for connection to the power or load side because of its identical connectors.The ends are made to connect only one way, making it impossible to connect the wrong polarities to one another, preventing accidental reverse polarity when hooking up a charger..
  • Suitable for low or medium current use. With 4 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to guarantee stable voltage and current..
  • Durable:Combined shell made from sturdy PC fire-retardant materials, allowing for over 10,000 connect/disconnect actions. With fitted rubber boot covers, protect against dust, moisture and corrosi..
  • Installation: Easy to use and install. Insert the wires into the terminal pins, then solder or crimp them. Insert the terminal pins into the connector housing and lock them in place. (Package include：2 Dust Cover,2x Connectors ,4x Terminal pins.).
Check Stock

279816 Thermal Fuse & Thermostat Kit & 3977767 High Limit Thermostat & 3387134 Cycling Thermostat & 3392519 Thermal Fuse Cutoff Kit for Whirlpool & Kenmore Admiral Maytag Amana KitchenAid

  • Package Included: 1 x 3977767 High Limit Thermostat, 1 x 3387134 Cycling Thermostat, 1x 3392519 Thermal Fuse, 1 x 279816 Thermal Fuse & Thermostat Kit, 1 x Instruction Sheet..
  • ✅ 3977767 Dryer high limit thermostat – pushes onto the terminal of the heating element. Has one 1/4″ male terminal, 1/4″ female terminal, and one 3/16″ male terminal..
  • ✅ 3387134 Dryer cycling thermostat with internal bias heater – L155-25 (opens at 155F and closes at 130F). 3392519 Dryer non resettable thermal fuse – two 3/16″ wire terminals. This fuse is located on the blower housing next to the blower fan. If the dryer overheats, the thermal fuse blows to cut off power to the dryer and/or stop the dryer from running..
  • ✅ 279816 Dryer thermal fuse (thermal cut-off) 309 degrees and high limit thermostat 250 degrees kit – Wiring is used if your old high limit thermostat has one terminal that presses onto the heating element. Includes thermal fuse, thermostat, screws, wiring kit, and instructions. Make sure to check your dryer vent for any restrictions..
  • ✅[Replaces Part Number]: High Limit Thermostat 3977767 WP3977767 3399693 898078 AP3131941 PS351925 EAP351925, Cycling Thermostat 3387134 WP3387134 ET187 3387135 33....
Check Stock

Lithonia Lighting WF6 30K40K50K 90CRI MW M6 LED Color Temperature Selectable Ultra Thin Recessed Downlight, 3000K | 4000K | 5000K, White, 6 inch

  • CANLESS DOWNLIGHT: This innovative wafer-slim design allows easy installation for new construction or remodel from below the ceiling while eliminating the need for recessed housing. (No housing required).
  • ENERGY SAVINGS: Energy star certified by using minimal watts and providing the lumens needed to light the room.
  • DIMMABLE: Easily dim to 10% to adjust the brightness of your space.
  • RATINGS: IC rated – safe to install in direct contact with insulation and wet location listed making it ideal to use in covered outdoor areas or bathrooms.
  • EASY INSTALL: Ideal for shallow ceiling plenum, little as 4-in of ceiling space needed for install.
  • spring clips, and includes 4-in cut out template to ensure a correct sized hole is cut into ceiling for proper install of the trim.
Check Stock

40pcs Compact Wire Conductor Connector- DIY Splicing into 2/3/4/6 Way Butt Terminal Connectors for 28-12 AWG with Screws

  • ARBITRARY COMBINATION - total 40pcs ,Including 10pcs left ,10pcs right and 20pcs middle for DIY splicing, which can be flexibly assembled or disassembled into 2 , 3, 4, 6bit (way) butt connectors as needed. Don't worry about buying mismatched terminal connectors.
  • UNIVERSAL COMPATIBILITY - Connect any combination of solid, stranded, and flexible copper wires. Suit for 0.08-4 sqmm / 28-12 AWG. They work with most every gauge of normal household wiring: ceiling fans, sockets, switches, cars, speakers, lighting, electrical boxes, chandeliers, light switches, and and other wire connecting parts..
  • EASY TO USE - Instead of traditional electrical tape and twist-type electrical butt connectors. Don't need more tools to connect wires, just using your hands. Push the orange levers to 90 degree and plug the wires (Strip off the housing of wires to 0.35-0.40inch and make sure that wires are plugged into the end) and then put the levers back..
  • REUSABLE - These SPL-1 terminal connectors are reusable and creative wire nuts. when you need to change other wires, just flip the little lever up and pull out what you need and replace.
  • SAFE AND RELIABLE - BL wire connectors housing is made of nylon PA66 with high quality flame retardant insulation material, which has the advan....
Check Stock

DEPEPE 30 Pcs 40 Pin 2.54mm Pin Headers Male and Female Header Pins PCB Board Headers for Arduino Prototype Shield

  • 620PCS Dupont Connector Kit: Dupont style 2.54mm connector kit consists of a selection of housings as well as male and female crimp pins to make....
  • The housing components are injection molded Nylon66,UL 94V-0. These thermoplastics are scientifically proven to resist UV-radiation than the normal....
  • Dupont 2.54mm pitch wire-to-wire connector in a complete package including the male housing, female/receptacle housing, female terminal and male....
  • The electrical interfaces are fully sealed using a shrouded-header for use applications with high levels of moisture. The shroud helps meet the low....
  • Applications: Dupont connector serves as electronic connectors for making custom wires for FPV, drone, breadboard, 3D printer, robots, etc..
Check Stock