ReviewsWalk in Cooler Drain

Dial GAL Cooler Coating

  • Turn any well-insulated room into a walk-in cooler for up to 70% less than traditional walk-in coolers..
  • Easy setup and low maintenance. Perfect for farmers, florists, hunters, brewers, restaurants, wine enthusiasts, dairy farms, and mortuaries..
  • Free app sends low/high temperature alerts and notifications, allows you to set cooler temperature, and monitor your cooler on your smartphone via Wi-Fi.
  • Guaranteed - get the cooler you want or get your money back..
  • Over 50,000 sold. Recommended by major university extension programs..
Check Stock

Cooler Replacement Parts Kit, Ice Chest Plastic Hinges, Threaded and Triple-Snap Drain Plug, Latches and Stainless Steel Screws Combo, Plastic Cooler Replacement Set

  • : Cooler replacement parts help to replace the broken parts of your ice chest and Igloo cooler.It’s easy to replace the cooler parts. The assembly instruction is included to make you understand the installation..
  • : Cooler replacement parts contain of threaded drain plug, triple drain plug, latch posts and hinges. The hinges and the latches are interchangeable with all current and original style Igloo cooler hinges and latches..
  • : Tough plastic material provide better using experience, the Igloo cooler parts are rugged and durable for long cooler life.
  • : 1 drain plug assembly-snap(fits Igloo 25-70 quart coolers). 1 drain plug assembly-threaded(fits Igloo 50-165 quart coolers). 4 hinges,16 stainless steel screws(fits Igloo 25-165 quart coolers). 2 latches, 6 stainless steel screws,1 assembly instruction(fits Igloo 50-165 quart coolers)..
  • : Please note that we are always here to help you. Please contact us through Amazon if you have any questions or inquiries..
Check Stock

ROLLMOSS Cooler Drain Plug for Yeti Cooler Plug Replacement Accessories for Yeti, Cooler Wheels Compatible with Yeti's Line of Roadie, Tundra, and Tank Coolers Fit ORCA Coolers (Red, 2 Pack)

  • 【Compatibility】Ergonomically Improved Drain plug, Perfectly fit for Yeti, Roadie, Tundra Coolers, and TANK Ice Buckets and RTIC coolers. It DRASTICALLY Improves the Ability to Easily Open Your Cooler Drain in All Kinds of Cold, Wet or Slippery Conditions..
  • 【Very Convenient Design】Improved finger knob design which can allows for much easier finger leverage to open and close the drain. So you only need to partially open the drain plug to drain without having to fully remove the plug..
  • 【Durable Construction】The Leak-Proof, Rugged Drain Plugs Allow Your Cooler to Drain While Only Partially Open. An Ergonomically Improved Twist Drain Plug Compatible With Yeti Line of Roadie, Tundra, and TANK Coolers..
  • 【Easy Use】When the drain plug is in a partially opened state, the drain plug drains the cooling water. Tightening the leak-proof drain plug helps prevent the cooling water from being lost from the cooler..
  • 【Customer service】Our aim is to provide Top Level Customer Service, and we are always standing by to solve any of your problems. If you have any question, please....
Check Stock

FerdY Floridian 56\ Walk-in Bathtub with Right-Side Door Opening and Quick Fill and Drain System, Rectangular Soaking Bathtub in White

  • Quick Fill & Drain: FerdY's Quick Fill and Drain design minimize wait time. The tub fills within 3 minutes, approximately 15 gallons per minute at 60 psi. Effortless drain system: simply turn the easy grip drain handle located beneath the showerhead to open and close. With the FerdY Fast-Drain system, water drains out in less than 2 minutes. (*Please consult a licensed plumber to ensure speedy and consistent filling and draining)..
  • Optimal Insulation: The FerdY Floridian Walk-in Bathtub is made of durable, quality materials that provide optimum insulation. Studies show that at a room temperature of 77 degrees Fahrenheit, water temperature only decreases by 1 degree after about 45 minutes due to its quality insulating material. We use genuine Lucite Grade Acrylic to manufacture our tubs..
  • Easy Maintenance: The FerdY Floridian Walk-In Bath has a modern design, with 100% glossy white acrylic, and without any additional coating that could fade or peel after years, guaranteeing that the surface will not suffer any yellowing for at least 10 years..
  • Easy Installation & Excellent After-sales: The FerdY Floridian Walk-in tub is technology free. Given the tub’s incredible insulation performance, a motorized heater is no longer required, for a more maintenance-f....
Check Stock

FerdY Floridian 52\ Walk-in Bathtub with Right-Side Door Opening and Quick Fill and Drain System, Rectangular Soaking Bathtub in White

  • Quick Fill & Drain: FerdY's Quick Fill and Drain design minimize wait time. The tub fills within 3 minutes, approximately 15 gallons per minute at 60 psi. Effortless drain system: simply turn the easy grip drain handle located beneath the showerhead to open and close. With the FerdY Fast-Drain system, water drains out in less than 2 minutes. (*Please consult a licensed plumber to ensure speedy and consistent filling and draining)..
  • Optimal Insulation: The FerdY Floridian Walk-in Bathtub is made of durable, quality materials that provide optimum insulation. Studies show that at a room temperature of 77 degrees Fahrenheit, water temperature only decreases by 1 degree after about 45 minutes due to its quality insulating material. We use genuine Lucite Grade Acrylic to manufacture our tubs..
  • Easy Maintenance: The FerdY Floridian Walk-In Bath has a modern design, with 100% glossy white acrylic, and without any additional coating that could fade or peel after years, guaranteeing that the surface will not suffer any yellowing for at least 10 years..
  • Easy Installation & Excellent After-sales: The FerdY Floridian Walk-in tub is technology free. Given the tub’s incredible insulation performance, a motorized heater is no longer required, for a more maintenance-f....
Check Stock

FerdY Floridian 52\ Walk-in Bathtub with Left-Side Door Opening and Quick Fill and Drain System, Rectangular Soaking Bathtub in White

  • Quick Fill & Drain: FerdY's Quick Fill and Drain design minimize wait time. The tub fills within 3 minutes, approximately 15 gallons per minute at 60 psi. Effortless drain system: simply turn the easy grip drain handle located beneath the showerhead to open and close. With the FerdY Fast-Drain system, water drains out in less than 2 minutes. (*Please consult a licensed plumber to ensure speedy and consistent filling and draining)..
  • Optimal Insulation: The FerdY Floridian Walk-in Bathtub is made of durable, quality materials that provide optimum insulation. Studies show that at a room temperature of 77 degrees Fahrenheit, water temperature only decreases by 1 degree after about 45 minutes due to its quality insulating material. We use genuine Lucite Grade Acrylic to manufacture our tubs..
  • Easy Maintenance: The FerdY Floridian Walk-In Bath has a modern design, with 100% glossy white acrylic, and without any additional coating that could fade or peel after years, guaranteeing that the surface will not suffer any yellowing for at least 10 years..
  • Easy Installation & Excellent After-sales: The FerdY Floridian Walk-in tub is technology free. Given the tub’s incredible insulation performance, a motorized heater is no longer required, for a more maintenance-f....
Check Stock

FerdY Floridian 47\ Walk-in Bathtub with Right-Side Door Opening and Quick Fill and Drain System, Rectangular Soaking Bathtub in White

  • Quick Fill & Drain: FerdY's Quick Fill and Drain design minimize wait time. The tub fills within 3 minutes, approximately 15 gallons per minute at 60 psi. Effortless drain system: simply turn the easy grip drain handle located beneath the showerhead to open and close. With the FerdY Fast-Drain system, water drains out in less than 2 minutes. (*Please consult a licensed plumber to ensure speedy and consistent filling and draining)..
  • Optimal Insulation: The FerdY Floridian Walk-in Bathtub is made of durable, quality materials that provide optimum insulation. Studies show that at a room temperature of 77 degrees Fahrenheit, water temperature only decreases by 1 degree after about 45 minutes due to its quality insulating material. We use genuine Lucite Grade Acrylic to manufacture our tubs..
  • Easy Maintenance: The FerdY Floridian Walk-In Bath has a modern design, with 100% glossy white acrylic, and without any additional coating that could fade or peel after years, guaranteeing that the surface will not suffer any yellowing for at least 10 years..
  • Easy Installation & Excellent After-sales: The FerdY Floridian Walk-in tub is technology free. Given the tub’s incredible insulation performance, a motorized heater is no longer required, for a more maintenance-f....
Check Stock

FerdY Floridian 56\ Walk-in Bathtub with Left-Side Door Opening and Quick Fill and Drain System, Rectangular Soaking Bathtub in White

  • Quick Fill & Drain: FerdY's Quick Fill and Drain design minimize wait time. The tub fills within 3 minutes, approximately 15 gallons per minute at 60 psi. Effortless drain system: simply turn the easy grip drain handle located beneath the showerhead to open and close. With the FerdY Fast-Drain system, water drains out in less than 2 minutes. (*Please consult a licensed plumber to ensure speedy and consistent filling and draining)..
  • Optimal Insulation: The FerdY Floridian Walk-in Bathtub is made of durable, quality materials that provide optimum insulation. Studies show that at a room temperature of 77 degrees Fahrenheit, water temperature only decreases by 1 degree after about 45 minutes due to its quality insulating material. We use genuine Lucite Grade Acrylic to manufacture our tubs..
  • Easy Maintenance: The FerdY Floridian Walk-In Bath has a modern design, with 100% glossy white acrylic, and without any additional coating that could fade or peel after years, guaranteeing that the surface will not suffer any yellowing for at least 10 years..
  • Easy Installation & Excellent After-sales: The FerdY Floridian Walk-in tub is technology free. Given the tub’s incredible insulation performance, a motorized heater is no longer required, for a more maintenance-f....
Check Stock

Igloo Cooler Replacement Standard Triple Snap Drain Plug (2pk)

  • Approx 13/16" in diameter at the threaded portion.
  • Triple snap (push-to-close) tethered cap. Includes: 2 drain plugs with push-to-close cap and nut with gasket & washer..
  • Easy installation: Place plug through cooler, screw down gasketed nut.
  • Triple-snap cap seals tight to prevent leaks, tethered cap helps prevent cap loss.
  • DOUBLE CHECK your cooler's drain plug hole size and cooler wall thickness. This is NOT a universal drain plug for Igloo coolers, as there are other sizes available..
Check Stock

Igloo Replacement Threaded Drain Plug

  • Fits Igloo coolers with an approx 1 inch outer diameter drain plug hole and approx 1-1/16 inch cooler wall thickness..
  • Threaded cap seals tight to prevent leaks. Plastic tether helps prevent cap loss..
  • DOUBLE CHECK your cooler's drain plug hole size and cooler wall thickness. This is NOT a universal drain plug for Igloo coolers, as there are other....
Check Stock

PROSOCOOL Cooler Drain Plug Replacement for Coleman Xtreme Coolers Ice Chest 50, 58 and 82 Qt -1.5" Shaft Length Drain Plug Kit

  • Compatible with 50, 58 and 82 Quart Coleman Xtreme Coolers.Replacement Plug are compatible with some Coleman 120 QT models, Please Measure Your Original Size Before Purchasing. The Drain Plug Assembly including: Cap, Main Shaft, and Rubber Gasket..
  • Double check your cooler's drain plug hole size and cooler wall thickness. This is NOT a Universal Drain Plug for Coleman Coolers as other sizes are available..
  • Replaces Part Number: 5010005241, Fit Model 6020. Shaft length: 1-1/2". Shaft diameter: 3/4".The Drain Spouts are vulnerable to damage, and when they are damaged, your cooler leaks, not good. This solves the problem much more cheaply than buying a new cooler..
  • If you can accept a small modification to your freezer or this plug, it will be compatible with your.
  • After Modification, Compatible with 60qt ,/Gott 80 qt and more.The drain plug length was perfect. The "male" part will easily fit inside the original opening inside the cooler but to screw on the plug /ring on the outside you will need to shave about 1/8th of an inch around the hole and it will fit ....
Check Stock