ReviewsWall Mount Patch Panel 1u

JINGCHENGMEI 3U 125 lb Weight Capacity Heavy Duty 19 Inches Steel Vertical Patch Panel Mounting Bracket for Networking Equipment (MFT-HVWRF3U)

  • STANDARDIZED HOLE SIZING: The mounting holes on the wall rack mount are 16 inches center to center for greater stability, and mounting to standard wall studs.
  • DURABILITY: Constructed to EIA-310 19in rack standards, the wall mount data rack features a solid steel design for ultimate durability. Max weight loading capacity: 125 pounds..
  • NO ASSEMBLY REQUIRED: For added convenience, this wall mount patch panel bracket arrives fully assembled with cage screws and nuts for mounting equipment..
  • VERSATILE FUNCTIONALITY: This multi-use patch panel mounting bracket enables you to mount your server or networking equipment vertically on a wall or horizontally under a desk for added versatility.
  • ENVIRONMENTALLY FRIENDLY: this foldable rack is at less volume, lower freight charge, smaller packaging. Easy to carry..
Check Stock

Pyle 19 Outlet 1U 19 Rackmount PDU Power Distribution Supply Center Conditioner Strip Unit Surge Protector 15 Amp Circuit Breaker 4 USB Multi Device Charge Ports 15FT Cord PCO865 Black

  • Versatile space saving 1U form factor rackmount power strip ideal for standard 19-inch racks. Detachable mounting flanges are configurable for....
  • 3 wide spaced front panel outlets and 16 flexible rear facing power cable outlet plugs allowing room for AC adapters and transformers. 4 USB ports for....
  • Integrated switched front panel AC outlet, plastic cover encased power switch. Built-in 15-amp circuit breaker prevents dangerous circuit overloads....
  • Compatible with 1U Mount 2 or 4 Post Rack Spaces, includes Detachable Rack Mount Brackets, provide power supply distribution to previously un-powered....
  • 110/240V - For worldwide usage. Optimized for reliable distribution of alternate waveform AC power from a UPS system, generator or utility wall outlet....
Check Stock

19 Inch Vertical Wall Mount Rack- 125 Pounds Heavyload Wall Mountable Server Rack (1U, Black)

  • Product Size: 5.9" High, Fitting your Standard 19" Server or Networking Equipments..
  • Heavy Duty Loading: Max 125 Pounds Heavy loading.
  • Vertically or Horizontally Mounting: This multi-use patch panel bracket enables you to mount your equipment vertically on a wall or horizontally under a desk..
  • No Assembly Required: the wall mount patch panel bracket arrives fully assembled with cage screws for mounting equipment in your data center.
Check Stock

TRENDnet 24-Port Blank Keystone 1U Patch Panel, TC-KP24, 1U 19' Metal Rackmount Housing, Recommended w/ TC-K25C6 & TC-K50C6 Cat6 Keystone Jacks (sold separately)

  • ADDED MOUNTING FEATURES: The IT server room cabinet features a 2U mounting bracket positioned toward the top of the enclosure, that you can use to mount patch cables or other rack-mount equipment..
  • SAVES SPACE: The 6U wall mount network cabinet saves space by extending only minimally from the wall and housing the length of your equipment vertically..
  • STURDY DESIGN: To help keep your equipment secure, the vertical vented 6U wall mount data rack cabinet features a sturdy metal design and a lock on both the door and access panel..
  • HASSLE-FREE INSTALLATION: The wall mount patch panel rack cabinet comes fully assembled and includes all of the necessary hardware to install equipment. The mounting holes are spaced 16 in. apart..
Check Stock

HQYing 2U Wall Mount Patch Panel Bracket-19 Inch Vertical Wall Mount Rack- 125 Pounds Heavyload Wall Mountable Server Rack 2U Black

  • Product Size: 5.9" High, Fitting your Standard 19" Server or Networking Equipments..
  • Heavy Duty Loading: Made of one Piece of Steel and Makes the Bracket Strong Enough to Load 125 lbs Maxly..
  • Vertically or Horizontally Mounting: This multi-use patch panel bracket enables you to mount your equipment vertically on a wall or horizontally under....
  • No Assembly Required: the wall mount patch panel bracket arrives fully assembled with cage screws for mounting equipment in your data center.
  • Standard Wall Mounting Holes: Wall Mounting Holes are 16-inch Center to Center for Mounting to Standard Wall Studs..
Check Stock

Tripp Lite 48-Port 2U Rackmount Cat5e 110 Patch Panel 568B, RJ45 Ethernet(N052-048)

  • 19 in. rackmount ready, 1U Height ( 1.75" ).
Check Stock

Tripp Lite 24-Port Cat6 / Cat5 Ethernet Patch Panel, Feedthrough Patch (RJ45 to RJ45), 1U Rackmount, Cable Management Bar, (N254-024)

  • 24 PORT: Tripp Lite’s Cat6 Feed-Through 24-port patch panel provides patching without punching down bulk wire to the back of the panel..
  • CAT6/CAT5 PATCH PANEL: Cat6 RJ45 Jacks on both sides of the panel..
  • CERTIFIED: Fully meets or exceeds Cat6 specifications - works with USOC, T568A, and T568B wiring..
  • EASY INSTALLATION + CABLE MANAGEMENT: 19" width mounts easily in 2-Post Relay Rack, or a Wall-Mount Hinged Rack. Detachable cable management bar keeps patch cables neat and tidy on the back of the panel..
Check Stock

StarTech.com 4U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19\ Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT4)

  • 4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm], recommended for networking equipment up to 12in deep, leaving 2in for cable routing.
  • maximum weight capacity of 44 lbs [20kg].
  • EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware.
  • Installs onto 16" studs with mounting holes.
  • EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.
Check Stock

Tripp Lite - N060-004 4U Hinged Wall Mount Patch Panel Bracket (N060-004) Black

  • 4U Wall-Mount Hinged Patch Panel Bracket.
  • Keyholes on 16-inch centers plus through-the-wall cabling cut-out.
  • Accepts any standard 19inch Patch Panels.
  • TAA compliant for GSA Schedule purchases.
Check Stock

Cable Matters UL Listed Mini 12-Port Vertical Patch Panel with 89D Bracket

  • Mini 12-port patch panel supports unshielded (UTP) 22 to 26 AWG solid or stranded cables with 180 degree oriented RJ45 jacks.
  • Compact 10 x 2.25 inch footprint is ideal for installing in tight spaces in a network closet or under a stairwell.
  • Wall mount the panel with the included snap-on 89D brackets and mounting screws.
  • Made for Cat 6a cabling, but backwards compatible with Cat 6, Cat 5e and Cat 5 cabling..
  • 10 Gigabit Ethernet rated patch panel offers identical performance to a 19 inch rack sized 10 Gig network patch panel in a small form factor.
  • 10 Gig rated network performance meets or exceeds TIA 568-C.2 while maintaining backwards compatibility.
  • Dual IDC termination blocks hold the cable in a star configuration for better pair isolation and accommodate either 110 or Krone impact tools.
  • Soho with style for a professional looking structured cabling solution in a home or small office network.
  • Pre-wire up to 12 locations and then Plug & play with standard RJ45 patch cables for connecting a LAN, video and audio streaming, IP camera surveillance and more.
  • Label spaces on the front provide writeable areas for easy identification and a professional looking installation.
  • Durable construction patch panel is built with a black-painted steel panel and gold-plat....
Check Stock

C2G/Cables To Go 03859 24-Port Blank Keystone/Multimedia Patch Panel, Black

  • Customize your networking setup with this 24-port blank keystone patch panel. 2U size is easy to mount & use..
  • Each panel accepts virtually all snap-in jacks, including Cat6. Use keystone jacks and inserts to configure your panel to accommodate a variety of setups..
  • Made from thick gauge metal to support your cables. After install, these patch panels sit flush for a clean, rock solid finish.
  • Clear numbering on the front provides a quick, easy way to identify cable runs..
  • Built for universal rack compatibility. Mounts to any standard 19-inch relay rack, cabinet or wall bracket..
Check Stock