ReviewsWall Mounted Clamps

Schumacher DSR139 225/50/25/10 Amp 6/12V Manual Wheel Charger & BT-100 Battery Load Tester and Voltmeter - 100 Amp

  • Product 1: 12 ft. Total Reach – 6 ft. power cord and 6 ft. front-mounted output cables.
  • Product 1: Solid State Circuitry – with silicon diodes for optimum performance.
  • Product 1: 135 Minute Timer – for precision control over the charging process.
  • Product 1: Easy-to-Read Meter – shows charging levels.
  • Product 2: TRUSTED TESTING: Test load, battery condition, and starter motor draw.
  • 50 Amp load test for 6V batteries and 100 Amp for 12V batteries.
  • Product 2: COMPLETE DIAGNOSIS: Delivers a complete charging system diagnosis for batteries in cars, small trucks, RVs, motorcycles, ATVs, boats, and lawn tractors.
  • Product 2: SIMPLE OPERATION: Top-mounted rocker switch for ease of use and highly visible meter readings.
  • Product 2: HEAVY-DUTY CLAMPS: Super-grip, heavy-duty, color-coded battery clamps.
Check Stock

Solar Flag Pole Light Outdoor Dusk to Dawn Waterproof Batteries Replaceable Fits 0.6”-3” Flagpole Solar Powered Led Light White 6000K

  • ...its a wide range of 0.6“~3” flag pole. It can also be installed on the ground with the spikes or on a wall and tilted as required.
  • Upward Light Projected: The lamp projects a large area light on the flag, compared with the traditional downlight with a spot light. The height of this Flagpole solar light suggested mounted within 13ft from the flag.
  • High Quality Solar Powered: Solar light for flag pole has a rating of IP65 for water and dust resistance. It’s charged higher efficiency with monocrystalline silicon solar panel. The main structures are cast-iron, built to serve your flag a lifetime.
  • Bright Dusk to Dawn: 7 ultra-bright LEDs cast 1000 lumens light allowing your neighbors to see every single one of the stars and stripes. After full charging, it provides a high brightness more than 12hrs from dusk to dawn. It can suffer 3 cloudy days.
  • Landscape Lighting: The solar lights outdoor has 4 lighting modes: always on, breathing, slow flash, fast flash. It’s also a very nice lamp for your Landscape lighting. If the product is defective, please send a message to us. We refund it without needing you to go to the facility to return, saving your time.
Check Stock

Schumacher SC1446 200/40/20/10 Amp Manual Wheel Charger with Engine Start & BT-100 Battery Load Tester and Voltmeter - 100 Amp

  • Product 1: 12 ft. Total Reach – 6 ft. power cord and 6 ft. front-mounted output cables.
  • Product 1: 135-minute timer – for precision control over the charging process.
  • Product 1: Easy to read meter – shows charging levels.
  • Product 1: 8-gauge output cables – stay flexible in cold weather.
  • Product 2: TRUSTED TESTING: Test load, battery condition, and starter motor draw.
  • 50 Amp load test for 6V batteries and 100 Amp for 12V batteries.
  • Product 2: COMPLETE DIAGNOSIS: Delivers a complete charging system diagnosis for batteries in cars, small trucks, RVs, motorcycles, ATVs, boats, and lawn tractors.
  • Product 2: SIMPLE OPERATION: Top-mounted rocker switch for ease of use and highly visible meter readings.
  • Product 2: HEAVY-DUTY CLAMPS: Super-grip, heavy-duty, color-coded battery clamps.
Check Stock

Schumacher SC1445 250/50/25/10 Amp Manual Wheel Charger with Engine Start & BT-100 Battery Load Tester and Voltmeter - 100 Amp

  • Product 1: 12 ft. Total Reach – 6 ft. power cord and 6 ft. front-mounted output cables.
  • Product 1: 135-minute timer – for precision control over the charging process.
  • Product 1: Easy to read meter – shows charging levels.
  • Product 1: 8-gauge output cables – stay flexible In cold weather.
  • Product 2: TRUSTED TESTING: Test load, battery condition, and starter motor draw.
  • 50 Amp load test for 6V batteries and 100 Amp for 12V batteries.
  • Product 2: COMPLETE DIAGNOSIS: Delivers a complete charging system diagnosis for batteries in cars, small trucks, RVs, motorcycles, ATVs, boats, and lawn tractors.
  • Product 2: SIMPLE OPERATION: Top-mounted rocker switch for ease of use and highly visible meter readings.
  • Product 2: HEAVY-DUTY CLAMPS: Super-grip, heavy-duty, color-coded battery clamps.
Check Stock

ROCKBROS Bike Repair Stand Bench Mount Home Bike Stand for Maintenance Bike Clamp Workbench Work Stands Bicycle Repair Rack for Road Mountain MTB Bikes

  • Easy to Mounted: The bike clamp bench mount is secured by four long screws and can be mounted stably and easily. Quick release design allows you to easily assemble work bike stand..
  • Adjustable Clamp: The bench mount bike repair stand with plastic clamps are sturdy and perform well, Clamp allows for clamping of bike tubes from 30mm to 75mm. Soft non-slip silicone clamp is efficient and non-damaging bicycle paint finish..
  • Easy to Use: Rotate the upper arm to hold the bike by the vertical seatpost or by the horizontal frame and tighten the various clamp. Sturdy, simple design makes servicing a bicycle a breeze..
  • Durable Materials: The bike stand for maintenance is made of iron, durable for long time. suit for commuter bike, mountain bike, road bike.(Tips: Load Capacity:44 Pounds).
  • Space Saving: You can choose to install the bicycle repair stand to the work bench or wall. Plus you can flip it around when you’re not using it so it doesn’t stick out. more convenient to keep at home. also works great as a bow vice, great value..
Check Stock

Piyl Broom Mop Holder Wall Mount Heavy Duty Tool Organizer Wall Hooks Storage For Lanudry Garden Garage Rack Hanger Organization Home Goods Black

  • This wall-mounted broom tool rack has both rubber clamps & metal hooks to hold long handle tools, household gadgets like cleaning supplies or garden garage tools with sticks. Thanks to the metal construction. It’s weatherproof. Can hanging on wall door from indoors (kitchen laundry closet bathroom garage shop shed Pantry) to outdoor garden lawn yard fence..
  • Large Capacity:7 positions(3slots 4hooks) for tools steam mops, rakes, brooms, rags, wet jet, snow shovels digger etc which with long stick handle or stuffs can hook up.Home Organization and Garage Organizer for Rake or Mop Handles diameter between 3/4-1/2 in..
  • This compact tool hanger organizer constructed with thicker stainless steel and premium silicone rubber material, durable and recycling. Can hold heavy duty tools firmly to stay in the clip. Rubber gripper would keep tool handles from slipping through the clip and also prevent potential scratch/scrape marks on handles..
  • This wall mount shovel storage rack equipped with enough screws set. We just upgrade its aperture (hole distance) to 16”, you can line up it to original wall studs. If you want more security, you can have all 4 mounting holes screwed, it'll load more heavy-duty tools.The hanger with Holds Up to 30 lbs..
Check Stock

Lacrosse American Flag Tapestry Wall Hanging Tapestry For Living Room Tapestry 60 X 51 Inch Wall Blanket Tapestry Indoor Tapestries

  • Perfect For Wall Hanging, Dorm Decor, Beach Throw, Picnic Cloth, Porch Hangings, Tablecloths, Bedspreads, Bedspreads, Sofa Covers Or Any Occasion!.
  • Material description: 100% polyester fiber..
  • EXTENSIVE USES: Size Is 60*51inch, Perfect Size Is Great For Wall Hangings, Beach Throws, Picnic Blankets, Porch Hangings, Table Cloths, Bed Spreads, Sofa Covers, Dorm Decorations, Ceiling Decor, Window Curtain, Sofa Covers Or Other Room Idea..
  • Two Barb Clamps And Three Non Mark Nail Hooks Can Fix The Two Ends Of The Wall Blanket On The Wall Without Damaging The Wall..
  • EASY TO HANG: Equipped With 2 Barb Clamps And 3 Non Marking Nail Hooks, The Two Ends Of The Wall Blanket Can Be Fixed On The Wall, Which Is Convenient For Installation And Will Not Damage The Wall..
Check Stock

Air Monster 16 Inch Wall Mount Fan with Remote Control, Garage Fan, High Velocity Wall Fan , 70 Degree Oscillating Wall fan with Remote, 3 Speed, Adjustable Tilt, ETL, White

  • 3 high-performance speeds with whisper-quiet 5 wing blade, great airflow for a wall mounted oscillating fan! Great option for wall fans for bedroom use..
  • Wide room oscillation function for an oscillating wall mounted fans. Easy to assemble with our included fan wall mount kit. Enable swing function on our oscillating wall mount fan from the remote..
  • Adjustable wall mounted fan head tilts and locks in place for precision comfort compared to other wall fans oscillating with remote and easy to use for a hanging fan..
  • Remote control fan with up to 7.5 hours auto shut off timer, great for a mountable fan! Speed, Timer, and Oscillation function from remote control compared to other wall mounted fans oscillating..
  • Durable plastic construction for a space saving wall mounted fan indoor. Safe and use wall mounted fan with remote with our Fused UL Plug. ETL Certified..
Check Stock

Boom Arm Clamps for Adjustable Mic Stand, Table Clamp that Can be Installed on Horizontal Table and Vertical Plane, Metal Table Mounting Clamp for Microphone Arm Stand by SUNMON

  • Assembly clip - suitable for mic arm desk mount and wall-mounted installation, Adapt to different use environments. It can be used as desktop microphone holder clamp, architect lamp clamp, magnifier lamp clamp, camera holder clamp..
  • Wide range of application - the bracket socket is suitable for most support pipes of 11-13mm. It is installed on a horizontal table with a maximum clamping thickness of 2.75"/7cm. It is installed on a vertical side plate and the maximum clamping thickness is 1.57"/ 4cm..
  • Refused to break - heavy metal desk clamp, professional desktop stress structure effectively remove the stress generated when pushing and pulling the mic desk arm, reducing the possibility of desk clamps breaking..
  • Refusal to slip off - The force-receiving design in the desktop reduces the outward support force and eases the force of sliding out. The non-slip rubber design has a larger force area and ground grip to prevent the microphone from sliding out and falling. Screw clamps can be stable. Locked and not shaken, as solid as a rock..
  • Easy to install - choose the installation position you want, first loosen the reinforcement bolt, put the clip into the table, tighten the reinforcement bolt, and then you can use it. Installation is quick and easy. Package I....
Check Stock

Supplying Demand 211 Indoor Dryer Vent Kit For Apartments Or Living Spaces With Poor Venting Compatible With Lambro

  • This is a universal item. Can be put with any brand as it will work with any dryer. A quick easy way to save your dryer and electric bill..
  • This simple kit only requires a quick snap together and half a cup of water at the bottom of the bowl to catch the lint..
  • Can be put on the wall, on top of the dryer, or mounted in some other fashion. Does include the mount, but no screws are included..
  • If your dryer is taking more than 1 cycle to dry a small amount of clothes and your vent is clogged, poorly installed, or not even accessible? Then this kit fixes that..
  • Includes circualar lint trap (must empty every few loads), 4 inch by 5 inch flex duct, 2 clamps, and a mounting clip..
Check Stock

Corner Clamps 4Pcs Woodworking 90 Degree Clamps of Cast Metal, Durable Go-tool Right Angle Clamp with Adjustable Jaws Good for DIY Framing, Shelving, Welding, Fish-tanks, Cabinets

  • ...atility】: The woodworking corner clamps align two pieces of wood, planks, metal, or glass into the clamp at a 90-degree angle. Moreover, the right angle clamps set is suitable for fixing fish-tanks, joining photo frames, installing furniture, welding, and molding, featuring holes in the base that allow them to be mounted to a workbench to add more stability for setup..
  • §【Premium Quality】: The rustproof aluminum-alloy parts of the unit make the angle clamps exceptionally long-lasting and coating on the surface prevents corrosion without worrying subpar paints would rub off on your workpieces. The vise-like design can hold firmly up to 200  pounds of pressure and nylon rounds that keep you from damaging the pieces being joined..
  • §【Accuracy】: The accuracy of the corner clamps allows you to make and reinforce frames with precision featuring maximum clamping range of 3-inch. The swivel jaw can rotate the clamp to adjust work-pieces to different thickness. The reinforced connection and metal diagonal connection part of the angle clamps decrease the excessive pressure which can cause breaking..
  • §【Lightweight】: Weighing in at just over 1.25 pound, corner clamps with lightweight designs that make them easy store on a shelf or in a tool bag for ....
Check Stock