ReviewsWarm Air Valve

Jtuxcke Air Mattress Valve, Air Valve 3 in 1 Inflatable Air Valve Secure Seal Cap Air Valve Caps Plugs Replacement for Inflatable Airbed Mattress, Sturdy for INTEX Inflatable Airbed Mattress

One Way: The 3 in 1 air valve is a one-way inflation valve, good for quick inflation..
The air mattress valve design ensures anti-leak inflation.Easy to fit, good performance and long serve life..
Designed for certain branded inflatable airbeds, such as for inflatable valve intex air mattress plug. Applicable models: 66723,66724,66725,68926,66767,66768,66769,66770,69710,66721,66720,67736,66972,66974,69710,67716.
Anti-leak: Air mattress valve features high secure air protection, the valve cap design ensures anti-leak when air inflation..
Easy To Install And Replace: 3 in 1 air valve secure seal cap It will fit into a hole about 4.28 cm in diameter and has a plug cover.
Very easy to install and replace,you will find it convenient..

Check Stock

NestBasics Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery kit Machine

The brine shrimp hatchery kits product contains：one unit brine shrimp eggs incubator，one unit black USB plug air pump with one unit black controller valve,one unit check valve, one unit air stone,1 meter transparent aquarium tubing, 1 meter black airline ,one unit brine shrimp net colllector,two units automatic brine shrimp feeder for fish,three units Brine shrimp suction tube and six units Brine shrimp storage bottle.
Our brine shrimp incubator is designed professional for hatching brine shrimp eggs which comes with the whole set including air pump air stone and aquarium tubing. The main purpose of the small The USB air pump is for continue to hatching brine shrimp when the electricity is off and after the home is powered off, the The USB air pump can be connected to the power bank to continue hatching brine shrimp..
There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the tank..
The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at ....

Check Stock

PowerNet XL Volleyball Wheeled Cart | Portable Hammock Ball Cart | Collapsible Rolling Training Equipment Basket | Lightweight Bin | Great for Indoor and Outdoor Use | Multisport

What you will receive: 1 piece of air pump valve adaptor, 1 piece of Metal air pump converter, 4 piece of air valve nozzles converter. Lightweigh and easy to carry, the air valve adapter set can meets all your needs..
Broad applicability: our air valve adapter set includes 4 different air nozzle converters. Round head nozzle fits inflatable beds, pools and boats. Sharp head nozzle fits swim rings and pool floats. Square head nozzle fits SUPs and dinghies. Spiral head nozzle fits kayaks and canoes..
High quality material: the air pump valve adaptor and air valve nozzles converter are made of high strength hard plastic and alloy, nozzle air pump converter made of copper. These two materials are quite sturdy and durable,can be used for a long time..
Easy to use: Choose the right nozzle for the adapter. Connect the air compressor hose to our adapter. Insert the adapter into the inflation port of SUP. Turn on the air compressor and start filling..
Works great: It works great, could hold down the pin, and prevents back flow of air so you can get the right pressure. It will be a Indispensable accessories of your inflatable pontoon boat..

Check Stock

Biodegradable Seed Starter Kit- Seed Starter Tray Kit with Plant Labels and Cell Plant Seed Starter Tray- Adjustable Humidity Seed Starter Tray Peat Pots for Indoor Outdoor Garden Vegetable Flower

What You Will Get: We will provide you with a complete set of biodegradable seed starter kit, including 5 germination trays, 120 peat pots with 2.4" sides, 120 T-shaped plant labels, 2 tools and 5 rotary air valves. The quantity is sufficient to meet your needs, which can allow a novice to successfully raise seedlings..
High-quality Material: Our germination tray is made of high-quality plastic, strong and durable. Each cell plant seed starter tray is made of environmentally friendly materials, which are naturally degradable, safe and convenient, and you can easily cultivate a variety of different seedlings throughout the year..
Rotating Air Valve: There are two round holes on the transparent dome of each germination tray. You can install the rotary air valve on it. By rotating it, you can easily control the air flow and adjust the humidity and temperature required during the growth of the seeds..
Easy to Use: You first need to put soil and seeds in the peat pots, pour some water, and place them in the seed starter tray to keep them warm and moisturizing. After the seeds germinate, the air valve should be opened in time to strengthen ventilation and reduce the humidity, which will help improve the resistance of the seedlings..

Check Stock

WHX Sous Vide Bags – 26 PCS Reusable Vacuum Zipper Bags Pack for Sous Vide Cooking, 10 Large Food Storage Bags and 10 Vacuum Sealer Bags with 2 Sealing Clips and 4 Sous Vide Clips for Anova and Joule Cookers

DESIGNED FOR SOUS VIDE COOKING: Made of PE/PA food grade material, WHX sous vide cooking bags are reusable up to 10 times. Safe for sous vide cooking, microwave and freezer..
STRONG ZIPPER & SEALED AIR VALVE: Double zipper construction, our vacuum bags features strong sealing without leakage. Air valve tenology block oxygen and moisture to maximize air removal. Keep your food’s nutrients, flavors and juices locked in..
KEEP FOOD FRESHER FOR UP TO FIVE TIMES: Work with manual or electric VACUUM PUMP, our food vacuum storage bag can be used for solid and semi-solid food storage, virtually eliminates freezer burn and help deter growth of bacteria..
2 SIZES FOOD SAVER BAG: 10pcs of each size – quart size 11.2″x10.2″ and gallan size 13.5″x11.7″, 2 different sizes to pack meats, vegetables, fruits,snacks as well as travel items (such as socks, cosmetics), meet all your needs..
NOTES: Do not submerge the air valve in the water bath while cooking, or it will affect the pumping performance. After use you just need simply turn inside out, gently scrub them on a mild dish soap or warm water then rinse thoroughly and wipe to dry for the next time use..

Check Stock

6-Pack Valve Stem Extenders, Mellbree 45 Degree 90 Degree 135 Degree Schrader Tire Valve Extension Compatible for Dual Wheels Passenger Cars, RV, Stroller, Bicycles, Motorcycles and Trailers

Three kinds of valve stem extension（45 degree, 90 degree and 135 degree）successfully solved a series of operations such as inability to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existin....

Check Stock

JACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)

Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..

Check Stock

GODESON Air Chuck for Semi Truck 1/4 FNPT 11.8 Extended Reach Dual Head Brass Air Chuck with Brass Quick Plug 2-Way Connect Air Chuck for Semi RV Dually Tires

1.12" EXTENDED DUAL HEAD AIR CHUCK: Straight foot air chuck are deisghed for inner wheels or difficult reached valve as well as the 30°reverse chuck are for outer wheels. 12" overall length is great for inflating inner duals of truck,rv, bus and so on.
2.DUAL HEAD INNER THREAD DESIGN:Both ends lock on valve core threads help to make hands free during inflating Push the air chuck on the valve stem firmly and lean it slightly to lock it onto the valve stem. When finished the inflating, align it back straight to valve stem and pull it off.
3.UNIVERSAL CONNECT TYPE: The brass air chuck built with a 1/4FNPT fits most inflator, air pump and compressor accessories.Meanwhile, equipped with a brass quick plug make it easily connect with quick coupler.
4.HEAVY DUTY BRASS CONSTRUCTION: Tire air chuck was constructed of a brass body and a zinc alloy nozzle which make it durable and reliable. Keep good performance for many years. An ideal pneumatic tool for home garage or automotive shop.
5.CLOSED FLOW /SEALING TYPE: Closed- flow air chuck allows air flow when engaged to the valve cores while shut off air flow when no link to valve cores. Wide applicable and convinient for a compressed airline..

Check Stock

Xximuim Inflatable Boat Air Valve,2PCS Inflatable Boat Replacement Caps Boat Spiral Air Plugs 0ne-Way Inflation Replacement for Inflatable Raft Boat Kayak

【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable..
【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation.The valve cover ensures air leakage..
【Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 17mm....
【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation....
【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit....

Check Stock

GODESON 1/4 FNPT Extended Reach Dual Head Air Chuck 2-Way Connection 11.8 Extended Brass Air Chuck with Rubber Handle,Tire Chuck with Quick Plug for Semi RV Truck Dually Tires

1.12" EXTENDED DUAL HEAD AIR CHUCK: Straight foot air chuck are deisghed for inner wheels or difficult reached valve as well as the 30°reverse chuck are for outer wheels. 12" overall length is great for inflating inner duals of truck,rv, bus and so on.
2.DUAL HEAD INNER THREAD DESIGN:Both ends lock on valve core threads help to make hands free during inflating Push the air chuck on the valve stem firmly and lean it slightly to lock it onto the valve stem. When finished the inflating, align it back straight to valve stem and pull it off.
3.UNIVERSAL CONNECT TYPE: The brass air chuck built with a 1/4FNPT fits most inflator, air pump and compressor accessories.Meanwhile, equipped with a brass quick plug make it easily connect with quick coupler.
4.HEAVY DUTY BRASS CONSTRUCTION: Tire air chuck was constructed of a brass body and a zinc alloy nozzle which make it durable and reliable. Keep good performance for many years. The rubber grip provide a more good touch feel and non-slip function during inflating. An ideal pneumatic tool for home garage or automotive shop.
5.CLOSED FLOW /SEALING TYPE: Closed- flow air chuck allows air flow when engaged to the valve cores while shut off air flow when no link to valve cores. Wide applicable and convinient for a compr....

Check Stock

Valve Remove Tool, Multi-Function Bicycle Tube Tire Remove Tools Multifunctional Air Nozzle Disassembly and Assembly Tool

★【High‑quality Brass】: The bike inflation air valve is made of high‑quality brass, it has threads and it has the feautures of corrosion resistance, it is not easy to break, and it can be used all the time..
★【Professional Manufacturing】: The bike inflation air valve is professional manufacturing, it has stable performance and high reliability..
★【Wonderful Accessory】: The bike inflation air valve is a wonderful accessory for bike tire inflator..
★【Easy to Carry】: The bike inflation air valve is compact, so it is very easy for you to carry around, you can put this valve adapter kit in your bag or even in your pocket anytime and anywhere..
★【Lightweight and Practical & Easy to Install and Use】: The bike inflation air valve is lightweight and practical, so it is very easy for you to install and use..

Check Stock