ReviewsWater Fittings

In-Ground Sprinkler System with Hose Watering Timer

  • EVERYTHING YOU NEED: Kit contains digital timer, 6 high-efficiency sprinklers, Blu-Lock tubing and fittings, tubing cutter, and 200 lb. pressure gauge.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installations faster and easier on your hands.
  • PUSH-ON QUICK-RELEASE FITTINGS: Blu-Lock quick-release collars allow for easy removal, yet the stronger the water pressure, the more the retaining rings grip the pipe to ensure against leaks.
  • ENVIRONMENTALLY FRIENDLY: Blu-Lock requires no glue or plumbers tape, protecting the environment from harmful chemicals used with traditional PVC fittings.
  • CONSERVE WATER: The timer features rain delay so you arent watering in the rain.
  • FLEXIBLE PROGRAMMING: A run time of 1-240 minutes, with intervals from every 6 hours to once every 7 days.
  • AREA COVERAGE: Ideal for medium to medium-large area coverage from 2,300-6,900 sq. ft. with average residential water pressure and flow.
  • ADJUSTABLE DISTANCE: Easy to adjust spray distance for each sprinkler from 15-25 ft. radius.
  • PART OR FULL CIRCLE: Simple to adjust from 40 to 360 degrees while the water is on or off.
  • TOOLS INCLUDED: Test water pressure before installation with the included 200 lb. gauge to ensure system....
Check Stock

Class A Customs 48 Gallon RV Waste Black Water Holding Tank 56 x 30 x 9 WT-4800

  • 48 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Heater Hose Fittings 1\\/2 NPT Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383 Chrome 3\\/4 Water Pump 5\\/8 Intake Mainfold Heater Hose Connector

  • Fitment: Heater Hose Fittings Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383.
  • Material: Intake & Water Pump Heater Hose Fittings is Made of high-quality Iron, which is durable,scratch resistant, corrosion resistant and impact resistance.
  • Features: Our Heater Hose Fittings are a great choice for connecting heater hoses to your water pump and intake manifold.
  • Package Includes: (1) 5/8" Fitting x 1.7913" Length With 1/2-14 NPT , (1) 3/4" Fittings x 2.933" Length With 1/2-14 NPT.
  • Please check to make sure you need 1/2" NPT Heater Hose Fittings.
Check Stock

Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank

  • 65 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 44.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the US....
Check Stock

Uenede 2PCS Solid Brass Bulkhead Fitting 3/8”Female x 1/2”Male Double Threaded Bulkhead Water Tank Connector

  • 【Solid Brass】The metal parts of bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【High Quality Thread】The bulkhead fittings are male and female thread, which are applicable models fitting for most items. Please check the size before ordering..
  • 【Double Washers Double Protection】Two washers are respectively padded on both sides of the bulkhead to provide double protection. Better prevent leakage and make you more happy to use your rain bucket or something..
  • 【Easy to Use】First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the water pipe with appropriate size at the end. No doubt, it is easy to operate..
  • 【Widely Used】The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels, suitable for various pipes, faucets, hoses, fittings, multiple uses to provide convenience for your life..
Check Stock

Class A Customs | T-2000 | One (1) RV Fresh Water 20 Gallon Tank, Grey Water

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the ....
Check Stock

SKYFOOST 4 Pcs PVC Bulkhead Fitting, 3/4 Inch Male 1/2 Inch Female Water Tank Connector with Plugs, Bulkhead Tank Fitting with 2 Rubber Ring Stablizing for Rain Barrels, Aquariums, Water Tanks (4)

  • ...ead fitting 3/4 inch is a must-have tool for breezy, rustic Irrigation work. This professional bulkhead fitting is robust, durable, and It even comes with a plug to help you seal the water tank. Each bulkhead fitting barbed quality PVC material, which is colorfast and durable, and lasts longer than ordinary plastic fittings, and comes with two thick silicone gaskets for better sealing performance..
  • EASY INSTALLATION WATER TANK FITTINGS: Get outstanding results with our PVC bulkhead fittings. Each PVC bulkhead fittings tool takes the hassle out of the rain barrels, water tanks installation, and renovation. First, you need to drill a 25-26mm hole for installation and then assemble the Water Tank Connector and plug connector, cover the plug to prevent dirt and dust from entering the water tank, and keep it clean..
  • SUITABLE FOR CORNER OF YOUR GARDEN: We trust in a product that will not only get the job done but also do the job best. This PVC bulkhead fitting 3/4 inch is the perfect tool for sealing rain barrels. The bulkhead tank fitting can install in water tanks, storage buckets, and rain barrels, suitable for household, commercial and industrial use. It will bring co....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank | UM-3000

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA i....
Check Stock

Class A Customs | T-10000 | One (1) RV Fresh Water 100 Gallon Tank, Grey Water | Ribbed for Extra Support

  • 100 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 50” Longest Length (not including fittings) x 18” x 26” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (SIX) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in ....
Check Stock

CHARLOTTE PIPE 2 SCH 40 COUPLING SXS PRESSURE ( 1 Unit Piece )

  • White fittings that are used in potable water applications only.
  • For use where systems will not exceed 140° F.
  • PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
  • MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..
Check Stock

Northern Brewer Stainless Steel Counterflow Wort Chiller

  • Chill your wort like the professionals do!.
  • A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
  • Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
  • Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
  • Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.
Check Stock