ReviewsWater Manifolds

Wilmad-LabGlass IG-357-100 Air-Tite 4-Place Double Vacuum Gas Manifold

The unique design of 8 manifolds, with 3 plugs, no need to use so many manifolds for closed management..
There are fixed ports on both sides, which are convenient to fix after installation..
High temperature resistance, corrosion resistance, aging resistance, and more durable to use..
There is a plug at the other end of the straight line. If the connection is needed, just pull out the plug..
Applicable to spa massage, hot spring, swimming pool, bathtub massage, etc..

Manifold for holding solvent recovery condensers.
Flow meter and rigid supply tube for condenser water supply.
Condenser water supply/drain manifold connects to a bench cold-water tap, or a refrigerated water chiller for improved control of condenser temperature and water conservation.
Parallel water supply/drain manifolds with quick disconnect tube fittings.

Most advanced, high temp RTV silicone gasket available.
Three times more oil resistant than conventional silicones.
eight times more flexible than cut gaskets.
Sensor-safe, low odor, and non-corrosive with superior adhesion.
Temperature range -75F to 700F intermittent.
Suggested Applications: Exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps, thermostat housings.

Most advanced, high temp RTV silicone gasket available.
Three times more oil resistant than conventional silicones.
eight times more flexible than cut gaskets.
Sensor-safe, low odor, and non-corrosive with superior adhesion.
Temperature range -75F to 700F intermittent.
Suggested Applications: Exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps, thermostat housings.

2" Manifold Coupler Kit Old Plumbing to New Hot Tub Spa Part for 1-2 Manifolds.
This Kit consists of (1) 2" Coupler, 2"Slip X 2"Slip (6") of 2" Flex Pipe, (1) 1/4 Pint of Christy's Red Hot Blue Glue and (1) 1/4 Pint of Christy's....
This kit is used to Connect a New 2" Manifold to old 2" Flex or Hard Pipe.
This Kit is enough glue to install 1-2 Manifolds.
To see our You Tube Video about this kit search for "Spin It to Win It Coupler Kit Plumbing Hot Tubs How To The Spa Guy".

all manifolds and misters are pretested to assure no clog operation.
multicolored neoprene collars help to keep track of different plant species or varieties.
water temperature stays consistent with ambient air temperature assuring great results (optimal temp 65 -75°f).
ul clone pump comes with internal filter for no clog operation.
comes with an additional neoprene collar and 2 additional misters.Power source type: Outlet.

The outer diameter of the sprinkler valve cover is 10"..
Sprinkler valve box lid with high quality durable plastic, with strong bearing capacity,enough for many years of use..
Irrigation valve box cover perfect for sprinkler valves or drip manifolds, flush with the grass , they don't get suck up in the mower..
Just snap irrigation valve box cover lid on sprinkler system valve box ,to protect sprinkler valves or drip manifolds, etc..

RELIABLE ADHESION. This high temp silicone sealant works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces). Resists cracking, shrinking & migrating..
FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area..
MULTI-USE. Valve covers, rocker covers, oil pans, water pumps, end seals, intake manifolds, and rear axle housing as well as industrial furnaces, ovens, etc..
CONVENIENT CURING. Tack-free in 1 hour. Full-strength in 24 hours..
LOCTITE 596 RTV RED SILICONE replaces almost any cut gasket or coat pre-cut gaskets to increase reliability..

★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
★Fitment: for 1978-1979 Honda CX500 1979-1982 Honda CX500C 1979-1981 Honda CX500D.
★Intake boots become dried out and cracked over time causing air leaks which lead to lean running engines that prematurely fail. Replaces dried out, cracked intake manifolds that can cause engine failure. Give your machine the new power and torque it really deserves, and have more fun with the power at your finger tips..
★Please check pictures for more details, and check your part number and our fitment before placing an order.
★1 set of 2 Brand new Aluminum carb manifolds rubber boots and orings (1 BID = SET OF 2 HOLDERS).

...ed Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo-Ram | Product Type: Manifold.

GET YOUR PRESSURE WASHER PUMP BACK IN ACTION: The Simpson Cleaning Thermal Relief Valve (TRV) is a high quality replacement part for your pressure washer pump.
With easy installation, you will be able to get back to your power washing projects in no time.
WHAT IT DOES: The TRV prevents heat damage to water seals and other internal components by releasing hot water from the pump and allowing cool water to come in via the pump inlet.
COMPATIBILITY: Compatible with most pressure washers that have 1/4-inch NPT.
See images and description below for full list of compatible pressure washer pumps.
PRODUCT DETAILS: Comes with thread sealer already installed.
QUALITY REPLACeMENT PARTS: Simpson replacement parts are great for commercial and residential pressure washers.
From inlet and outlet fittings to seal kits, manifolds, and valves, save time and money by repairing your pump with genuine Simpson components.