ReviewsWater Meter Wrench

Digital pH/TDS Meter with ATC pH Tester, 4 in 1 EC pH TDS Temp 0.01 Resolution High Accuracy TDS Meter, Water Tester for Water, Wine, Spas and Aquariums

  • 【4-in-1 pH Meter】pH meter has a four-in-one function, which can measure EC, PH, TDS and TEMP with high precision at the same time. All-round measurement of water quality to ensure healthy water quality..
  • 【ATC Function pH Meter】The pH meter has an automatic temperature compensation function, which can be adjusted according to the water temperature and water quality. So you do not need to care about the temperature of the liquid being measured..
  • 【High Accuracy Water Tester】High-accuracy algorithm chip and electrode of our digital ph meter ensure accurate and fast response. One-button lock reading function helps lock reading even if the tds meter is taken out of the sample!.
  • 【IP67 Waterproof Grade pH Meter】The pH meter is IP67 waterproof grade to prevent the product can not be used after accidentally falling into the water or other solutions.The battery cover is equipped with a waterproof line, but when this issue happen, pH meter should be taken out immediately because soaking the product long time may cause product damaged and can not be used normally..
Check Stock

Diamond Original CR8900A Quad Band FM Mobile Antenna

  • The CR8900A is pretuned to give best bandwidth and VSWR over the FM portions of 10m, 6m, 2m, and 70cm ham bands when mounted on the side of vehicle (i.e. trunk lid) using a K400 or K600 series mount..
  • Designed specifically for the Yaesu FT-8900R.
  • The Diamond CR8900A quadband is a 10 meter, 6 meter, 2 meter and 440 MHz mobile antenna. It is a 1/4 wave on 10 and 6 meters providing and a 1/2 wave on 2 meters (2.15 dBi gain) and a 2 5/8 wave on 440 MHz (5.5 dBi gain). This antenna can handle up to 60 watts FM..
  • There are two center coils and a base coil. The connector type is UHF (for PO mount). The antenna is pretuned to give the best performance over the FM portions of the 10m, 6m, 2m and 70 cm bands when mounted on the side of the vehicle (such as a trunk lip mount). Suggested mounts would include the K400 or K600 series. This antenna is not recommended for a magnet mount or through-the-roof mounts. Includes an Allen wrench for tuning..
Check Stock

CDI 2002MRMH 3/8-Inch Drive Metal Handle Click Type Torque Wrench, Torque Range 30 to 200-Inc

  • Specifications: The CDI 3/8-Inch Drive Micrometer Adjustable Torque Wrench features dual scales with an English Range of 30-200 in. lbs. and a Newton Meter Range of 4.0 - 22.0 Nm with an accuracy of ± 4% CW ± 6% CCW of indicated value, CW, from 20% to 100% of full scale. All CDI Torque Wrenches are individually serialized with a matching certificate of calibration traceable to N.I.S.T.
  • Size: The overall length of the torque wrench is 10.15 inches. The width across the torque head is 1.06 inches and the depth of the head is 0.93 inches. The bottom of the handle to the top of the lock ring is 1.06 inches..
  • Features: Quick release button that provides good socket retention as well as easy socket removal. Easy-to-read laser marked scales which makes the wrench fast, accurate and easy to set. Positive lock with spring loaded pull down lock ring. Handles are lightly knurled for a tough, non-slip grip.
  • Performance: Rugged, industrial strength torque wrenche able to withstand the rigors of professional use. CDI Torque Products are proudly made in the United States of America, City of Industry, California..
  • Rugged Protection: Includes a blow-molded case to protect the wrench when not in use.
Check Stock

Swampfox Liberator Dot Sight, Green Circle Dot

  • IN THE BOX: Contains optic, lens covers, low profile 1913 Picatinny mount, mount wrench, wrench, lens cloth, and battery..
  • CRISP ILLUMINATION: The 2 MOA center dot is small enough to take precision shots to 200 yards, while the 65 MOA circle grabs and centers the eye immediately..
  • FAST TARGET ACQUISITION: The 1x magnification allows for a lightning-quick sight picture..
  • TOUGH TO ITS CORE: Lightweight but tough, the Liberator is engineered to withstand 800 Gs of impact. The Liberator is waterproof, fog resistant, and features hydrophobic & anti-scratch coatings on the ruby red, anti-glare lenses, 1 Meter/IPX7 Rated..
  • AUTO SHUT OFF: The included CR2032 battery can last for 3,000 hours on a medium setting. The Liberator's auto-off shuts downs the red dot after 4 hours without movement..
Check Stock

Superb Wrench #3 -Galvanized Steel Water Filter Wrench

  • LONG LASTING – This metal water filter wrench will not bend, bow or break during operation thanks to its strong and durable zinc-plated, galvanized steel construction..
  • PERFECT ALTERNATIVE – This steel water filter wrench makes a more durable alternative to the cheaper CFW07 plastic water filter wrench. It will last for years changing out those filter cartridges..
  • EASY TO USE – This water filter cartridge wrench is specially designed to fit around your water filter housing with its four teeth and loosen even the most jammed water filter housings with a simple twist..
  • LONGER HANDLE – This wrench for water filter housing is designed with a longer handle (as compared to standard plastic wrenches) for more leverage. The handle features a smooth blue rubberized finish for a superior grip..
  • FITS – Featuring a 4. 28” diameter, this metal water filter wrench perfectly fits into the standard RO Slim Line, Watts WR 100, and many more slim line housing units..
Check Stock

Pool Salt Tester & PH Meter, Hofun Digital Salinity Meter and PH Tester for Pool Saltwater and Drinking Water, 5 in 1 Salinity PH Temp EC and TDS Meter Swimming Pool Hot Tub Spas, High Accuracy

  • 【 Wide Usage PH Meter 】Hofun ph meter is an essential tool to improve your life quality. This digital ph tester can be applied in the following applications,drinking water quality test, swimming pools quality monitor, PH balance measurement in RO/DI system, aquarium, spa, hot tub or hydroponics..
  • 【 Reliable TDS Meter With Accurate & Quick Measurement 】 Hofun digital ppm meter is equipped with premium quality titanium alloy probe, which enables quick and accurate water quality test. Our water quality tester is with 0-9999ppm & 0-200ppt wide test range ensures different function of usage..
  • Easy Operation for Salinity Test: When you want to use our pool salt tester, all you need to do is to turn the meter ON and click MODE button to shift to SALINITY function. This easy and convenient operation design is very considerate and offers premium experience. Wide Application Salinity Meter: Hofun digital water salinity test meter applies for multiple uses, like salt water test for swimming pool, Koi Fish, Seawater, Aquariums & Marine Monitoring..
  • Three Display Designs for Salinity Test: PPM + PPT + %. For Swimming....
Check Stock

Digital pH/TDS Meter with ATC pH Tester, 0.01 Resolution High Accuracy 3 in 1 Pen Type Tester, Water Tester for Water, Wine, Spas and Aquariums

  • 【3-in-1 pH Meter】pH meter has a three-in-one function, which can measure PH, TDS and temperature with high precision at the same time. All-round measurement of water quality to ensure healthy water quality..
  • 【Automatic Calibration pH Tester】With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. And pH meter uses a 3-point calibration method to calibrate the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18. You can calibrate effortlessly to ensure the accuracy of your measurements..
  • 【High Accuracy Water Tester】High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response. Green Backlit LCD Design guarantees that you can read the measuring results in any condition. One-button lock reading function helps lock reading even if the tds Meter is taken out of the sample!.
  • 【Pocket Size Water pH Tester】 You can use this small Pocket Size but powerful pH meter device to measure your aquarium, pool, pond in a garden, bath tub to test the levels of pH value. The digital ph meter can also be used to measure drinking water, R....
Check Stock

FIPUEN Bicycle Spoke Tension Meter Tool Kit 6Pcs Aluminum Alloy Mountain Bike Repair Tool Spoke Wrench Set for Bicycle Wheel Spokes Correction (Black)

  • ★ WIDE APPLICATION: A Bicycle Spoke Wrench Tension Gauge Will Work on Almost Any Bicycle Spoke, Regardless of Diameter/material/or Shape, To Measure the Tension Value, It Includes Steel Spokes/flat Spokes/aluminum Spokes/titanium Spokes and Other Finishes Etc.
  • ★ HIGH QUALITY: This Spoke Tension Meter is Made of Aluminum Alloy CNC, High Strength and Corrosion Resistancem, Long-term Use Without Deformation.
  • ★ ACCURATE AND RELIABLE: This Bicycle Tool Measures The Tension of Each Spoke in The Wheel and The Relative Tention of All Spokes in The Wheel Accurately.
  • ★ EASY TO OPERATE: The Bicycle Spoke Tension Meter Tool is the Right Size, Ergonomic, Can Be Operated with One Hand, Easy to Grasp.
  • ★ MULTI-PURPOSE: Bicycle Tension Meter Tool Are Used in Making or Repairing Wheels, Diagnosing Wheel Problems, Wheel Fabrication or Calibration, and New Bike Assembly.
Check Stock

Industrial Brand CDI Torque 2502MRPH 3/8-Inch Drive Adjustable Micrometer Torque Wrench, Torque Range 30 to 250-Inch-Pounds

  • Specifications: The CDI 3/8-Inch Drive Micrometer Adjustable Torque Wrench features dual scales with an English Range of 30-250 in. lbs. and a Newton Meter Range of 4.0 - 27.7 Nm with an accuracy of ± 4% CW ± 6% CCW of indicated value, CW, from 20% to 100% of full scale. All CDI Torque Wrenches are individually serialized with a matching certificate of calibration traceable to N.I.S.T.
  • Size: The overall length of the torque wrench is 11.25 inches. The width across the torque head is 1.06 inches and the depth of the head is 1.06 inches. The bottom the handle to the top of the lock ring is 1.06 inches..
  • Features: Quick release button that provides good socket retention as well as easy socket removal. Easy-to-read laser marked scales which makes the wrench fast, accurate and easy to set. Positive lock with spring loaded pull down lock ring. Ergonomic grip for durabiltiy and comfort..
  • Performance: Rugged, industrial strength torque wrenches able to withstand the rigors of professional use. Meets or exceeds ASME standards, ISO 6789 standards. CDI Torque Products are proudly made in the United States of America, City of Industry, California..
  • Rugged Protection: Includes a blow-molded case to protect the wrench when not in use.
Check Stock

HomeSoGood Angle Meter, Torque Angle Gauge For Torque Wrench 360 Degrees Adjustable Easy To Read Measurer Car Garage Tool

  • Torsion angle gauge scale is 0-360 degrees, 1/2'' drive ratchet handle..
  • Torque Meter is made of sleeve and outer casing durable plastic, which is durable and not easy to be damaged..
  • It is a special tool for angle torque gauges. It is used for torque wrench 1/2 torque gauge..
  • Torsion angle gauge adjustable arm has 2 different length, flexible to use. for torque wrench 1/2 drive..
  • It is convenient for adjustment and can be used in many occasions. It is widely used for our next reuse..
Check Stock

Inkesky Road Bike Cleats Compatible with Look KEO Grip, Anti Slip Rubber (0 Degree Float)

  • ✅【Specification】- Road bike cleats with 0 float degree, fit for any shoes with 3-holes.
  • ✅【Compatible】- with LOOK Brand KEO pedals (include KEO Sprint, KEO Classic 2/3, Look Easy, KEO 2 Max,except KEO Blade Carbon), Garmn Vector power meter, Assioma power meter..
  • ✅【Not Compatible】- with LOOK KEO Blade carbon, Peloton bike, LOOK Delta(ARC), Shimano SPD and SPD-SL, SPEEDPLAY, Crankbrothers. Please Know Before Making a Purchase..
  • ✅【Anti-Slip Design】- The rubber grip pads prevents the rider from slipping, and they are more rubbery than the hard plastic cleat. Also wear down much more slowly..
  • ✅【Package Include】 - 2x cleats, 6x washers, 6x screws, 1x 4mm hex wrench (Installation tool).
Check Stock