ReviewsWater Pipe Fitting

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....

Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

✔【HIGH QUALITY MATERIAL】Pex crimp ring meets ASTM F2098 requirements that adopts 304 Premium Stainless steel material, which features sturdy and durable. Has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applicatio....

Check Stock

Class A Customs | T-1300-SP | One (1) Spouted 13 Gallon RV Fresh and Gray Water Holding Tank RV Concession

...PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
TANK BUILT-IN FITTINGS: (ONE) 1.25" Outer Diameter x 2" Long Boss Fitting (Smooth Pipe / Spout) fitting is open and glue does not stick to pipe, hose with clamp needed (THREE) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..

Check Stock

Brooklyn Pipe Flange - 16 Pack 3/4' Black Floor Flange Cast Iron Pipe Fittings | Our 3/4 Inch Pipe Flange | Industrial Pipe Flanges | Decorative Pipe Fitting Fit for Steampunk Furniture

3/4 INCH FLOOR FLANGE - Our Brooklyn Pipe floor flange is a great choice for all your DIY needs. This decorative flange is the perfect pipe fitting to take your project to the next level. These fittings are for DIY projects only, they are not rated to carry gas nor water..
INDUSTRIAL DECOR- Our 3 hole black floor flange is 2.75" inches in diameter and provides a unique look for all projects. Whether you're looking for an industrial, steampunk, vintage, retro, factory look, our flange will fit perfectly into your project..
SUPPORT AMERICAN BUSINESS – Brooklyn Pipe is a small business headquartered in New York. We would really appreciate the opportunity to show you what makes Brooklyn Pipe the #1 top rated pipe fitting brand. We always go the extra mile for our awesome customers!.
NO CHINA STAMP - Our forged malleable iron flange doesn't have the word "CHINA" stamped into the flange which is another reason why Brooklyn Pipe stands out in the pipe fitting products that are on the market. Our 3 hole flange is just as strong as the competition but simply looks better!.
QUALITY CONTROL - We’ve partnered with world class steel factories and hire licensed inspectors to review our Brooklyn Pipe products prior to being packaged. Rest assured you are getting to....

Check Stock

PVC Pipe Reamer with 1-½-Inch Head Aluminum, PVC Fitting Saver, PVC Socket Saver with 0.315″ Hex Shaft, For Water Lines, Drain Lines, Vent Lines

Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It is works great for Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
Compatibility: PVC fitting saver come with 0.315″ hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..

Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....

Check Stock

NDS 5

Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, walkways, and patios.
Fits 4 in. Sewer and Drain Pipe & Fittings, 4 in. Single-Wall Corrugated Pipe, 4 in. Triple-Wall Pipe. 13 GPM flow rate. 4.3 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installedrecommended for pedestrians, bicycles, and wheelchair traffic.
Place on top of drain pipe or drain fitting for a soil-tight fit. 5 in. Square Drain Grates are available in a variety of colors and materials.
Comes with one 5 in. Square Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defectsor well replace it.

Check Stock

PVC Fitting Saver with 1-½-Inch and 2 Inch Head Aluminum, PVC Pipe Reamer, PVC Socket Saver with 0.315" Hex Shaft, For Water Lines, Drain Lines, Vent Lines

Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It works great on Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
Compatibility: PVC fitting saver come with 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..

Check Stock

CVS 50 PCS 3/4 Inch PEX Cinch Clamp Rings, Stainless Steel Pex Fittings Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (3/4 Inch)

HIGH QUALITY - Meet ASTM F2098 requirements. Made of 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion..
EASY INSTALLATION - Slide the 3/4 inch PEX cinch clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool. Providing a strong, leak-free and reliable crimp fitting connection..
WIDELY USED - Conversancy Brand products’ quality and performance is field-proven. Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
CERTIFIED - Meet the same standards for all commercial and residential plumbing applications - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc..
SIZE - 3/4 inch (23.3mm) PEX clamps, fit for 3/4 inch PEX pipe..

Check Stock

letsFix PVC Elbow Fittings 1 1/4 Inch, 3-Way/4-Way/5-Way PVC Connectors for SCH40 1 1/4 Inch PVC Pipe - Build Heavy Duty PVC Furniture and Plumbing Projects Available, White [Pack of 4]

【Premium Quality】Made of high quality plastic material, the fitting is able to withstand impact, not easy to crack or break..
【PVC Fitting Size】This 5-Way PVC pipe fitting size is schedule 1 inch socket ,it's Ideal for Center Connections..
【Widely Use】This PVC Pipe adapter is use for agricultural irrigation, soilless cultivation systems, furniture, shelves, pool products, DIY shelves products, spa, potable water, and chilled water applications..
【Easy to Install】PVC is lightweight, easy to install, requires no special tools for cutting and is installed by solvent cementing..
【100% Promise】Replacement or full refund can be provided if you are not satisfied with our 5 way PVC fitting..

Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Gray Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock