ReviewsWater Pipe Pipe Fittings

Everflow Supplies PCBL3460 60\ Long Pre-Cut Black Steel Pipe with 3/4\ Nominal Size Diameter

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Rustic State Industrial Plumbing Gooseneck Connector Iron Pipe Rust Free 3/4 Inch for DIY Projects Black Set of 10

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

LOKMAN 50 Pack 1/2 Inch PEX Cinch Clamps, Stainless Steel Cinch Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (1/2 Inch)

  • HIGH QUALITY- 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion, construction..
  • 360 °SEAL PROTECTION - These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using system..
  • WIDELY USED- Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • WIDELY APPLICATIONS - Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
  • SIZE - 1/2 inch (17.5mm) PEX cinch clamp rings, fit for 1/2 inch PEX pipe..
Check Stock

FORMUFIT 3/4\ PVC Fittings, 3-Way Corner Connector, Furniture Grade, Orange (8-Pack) - for Greenhouse, PVC Pipe Furniture, Maker Projects | Fits 3/4 inch PVC Pipe - F0343WE-OR-8

  • EASY TO USE: The FORMUFIT PVC 3-Way Corner Fitting is the fastest and most effortless way to build structural PVC projects with 3/4" PVC pipe. With these PVC fittings (3/4 inch), you can make cubes, PVC pipe furniture, boxes, or right-angle configurations which require a corner or three-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
  • GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
  • a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
  • SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-lik....
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

3/4\ 6-Way Side Outlet Cross, Home TZH Cast Malleable Iron Pipe 6-Way Outlet Corner Fittings for Industrial vintage style DIY Project/Furniture/Shelving Decoration(10, 3/4\)

  • 1.Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 6-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • 2.Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 6-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 6-way outlet tee work great without sacrificing functionality..
  • 3.Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 6-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • 4.Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retr....
Check Stock

3/4\ 4-Way Cross Fitting Connector, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project/Furniture/Shelving Decoration (10, 3/4“)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 4-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 4-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 4-way cross fitting connector work great without sacrificing functionality..
  • Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 4-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft....
Check Stock

1/2\ 4-Way Cross Fitting Connector, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project/Furniture/Shelving Decoration(10, 1/2“)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 4-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 4-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 4-way cross fitting connector work great without sacrificing functionality..
  • Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 4-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft....
Check Stock

3/4\ 4-Way Side Outlet Tee, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project/Furniture/Shelving Decoration (10, 3/4\)

  • 1.Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 4-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 4-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 4-way outlet tee work great without sacrificing functionality..
  • 3.Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 4-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro In....
Check Stock