ReviewsWater Pressure Reducing Valve With Gauge

Taprite T-742 Double Gauge Co2 Kegerator Regulator

Commercial Dual Gauge Primary Keg Beer Regulator.
CO2, 60# & 2000# Gauge, 5/16b Shutoff (W/Ck Valve) Plastic Bonnet for Easy Pressure Adjustment Ball Check Valve.
High Pressure Gauge (Side) Indicates Co2 Tank Pressure Remaining (0-2000 psi).
Low Pressure Gauge (Top) Indicates Output Pressure to Keg (0-60 psi).

Check Stock

High Pressure Hand Pump Calibrator for Field Calibration, Calibration Labs Model: AI-DPI-2300 (Only Hand Pump)

Features: Dual source of pneumatic pressure and vacuum | Built-in fine adjust vernier | Needle valve provides controlled pressure release | Selector valve for vacuum or pressure generation | Comfortable and ergonomically designed molded handles | Adjustable stroke..
Model: DPI-2300 | Range: 0 to 600 Kg/Cm2 | Winters Pressure Gauge Range: 0 to 700 Bar | Winters Vacuum Gauge: -1 to 0 Bar/ -1 to 3 Bar..
Material of Construction: SS 304 | Operation: Pressure is generated by the hand operation of the caliper handle which move a piston back and forth resulting in the suction and delivery fluid used for pressure generation. Suitable for use with water/oil | Weight: 2.5 Kg Approx..
Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4.

Check Stock

SharkBite 3/4 Inch EB45 Double Union Pressure Regulating Valve (PRV), Push to Connect Brass Plumbing Fittings, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 23894-0045

Made of water-safe materials, mostly lead-free brass, this RV water pressure regulator attaches to the main water line and lets the water run through it at a controlled rate, which changes the water pressure. You can set this water pressure to whichever PSI you would like by using a flat screwdriver to turn the valve..
This water pressure regulator works in temperatures up to 60°C and, because of the sturdy construction, is durable and meant to last..
This RV water pressure regulator comes with a PSI gauge that measures from 0-160 PSI. The thread on the gauge is ½” and the numbers on the gauge are easy to read, with marks every 2 PSI as well as the main marks every 20 PSI..

Check Stock

Automotive Smoke Leak Detector Tester EVAP Smoke Machine with Dual Mode

...Smoke Mode】Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 7-15 seconds, dramatically reducing diagnostic time. Smoke output value: 1-6L/min..
【Flow Meter & Pressure Gauge】According to the pressure of the detection pipeline, it is controlled with a flowmeter to more effectively protect the pipeline from damage. By observing the pressure gauge, you can determine whether the pipeline is leaking more quickly and accurately. Usually the pressure gauge continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired..
【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports.
in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and int....

Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

[Professional Factory]We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
[Safety First]Automatic pressure relief valve, when the pressure of the inside co2 steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
[Refine The Bubbles]Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
[Low Cost]You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
[Complete Accessories]Steel bottle, Stainless steel pressur....

Check Stock

Longacre® 52-52009 Deluxe 2-1/2 GID Quick Fill Gauge 0-60 psi

Make your tire pressure readings easy to see day or night with this 2-1/2" glow in the dark face Longacre air pressure gauge.
Connect your air line, press the lever, and fill your tires twice as fast as other air pressure gauges.
and there is no need to remove the fill chuck.
The tire gauge contains a built-in tire pressure deflator valve to drop your pressure to your desired level and reduce pressure in overinflated tires.
The internal check valve allows use as a stand alone tire gauge without the air hose.
Features a high flex 17" hose and includes both an angle and ball chuck for added convenience and easy access to the tire valve from any angle.

Check Stock

RK34-975XL Backflow Preventer Repair Kit -3/4 1 Complete Repair Kit with Springs

Contains instructions, easy to repair, effectively solve the problem of water leakage..
Compatible with 3/4-1" 975XL and 975XL2 Reduced Pressure Backflow Preventer..
Contains: (1) O-ring for relief valve stem, (1) #1 check spring, (1) #2 seal rings, (1) relief valve seal ring, (1) diaphragm, (2) O-rings for check....
Note: Please clean up the debris in the pressure reducing valve during installation to avoid water leakage caused by inability to seal..

Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

Professional Factory - We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
High Capacity and Safe First - You could add more material: Citric acid 400g + baking soda 400 + water 600g. The capacity is twice that of an ordinary 2L bottle and half of 4L! An automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
Refine The Bubbles - Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
Low Cost - You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
Complete Accessories - steel bottle, Stainless steel pressure reducing....

Check Stock

Yescom 3 Gallon Stainless Steel Vacuum Chamber Tempered Glass Lid kit Degassing Urethanes Silicones Epoxies

[Precise Vacuum Chamber]: 3 Gallon vacuum chamber kit includes 1pc vacuum chamber with lid & gasket, 1pc glycerin filled gauge, 1pc silicone pad, 1pc hose and 1pc Teflon tape.
help for providing vacuuming and showing the accurate vacuum pressure, widely using on degassing urethanes, silicone, epoxies, extracting essential oil, resin casting and wood stabilizing.
[Easy Operation]: Glycerin filled industrial gauge for clearly displaying the operating vacuum pressure, perfect for you to monitor the whole vacuuming process.
noise eliminating valve for reducing vibration and noise.
air intake switch and air exhausting switch on the valve for easy to start and stop pulling vacuum.
[Durable Construction]: Made of strong stainless steel, the chamber ensures sturdiness, corrosion & rust resistance and durability.
high strength and shatter-resistant tempered glass lid for providing safety.
[Good Sealing]: Chemical resistant silicone gasket on the edge of chamber for providing perfect sealing on degassing.
max rated vacuum up to 29 inHg at sea level and can maintain vacuum within 24 hours.
[Practical Accessories]: Steel wire hose for strength and durability.
non-slip silicone mesh pad for placing in the chamber while degassing.
Teflon tape for enhancing the sealing....

Check Stock

Air Filter Pressure Regulator Kit Pneumatic Spray Gun Set 1/4 Inch Air Tool Compressor Filter with Gauge, Air Pressure Regulator Gauge + In-Line Oil Water Trap Filter Separator Tool

【Universal Fit】: This air compressor pressure regulator has a standard 1/4 thread will fit most spray guns and airlines.
Helps separate solid contaminants such as pipe scale, rust, condensation from airlines.
【Air Pressure Gauge】: Air pressure gauge adds convenience for monitor and adjust the pressure value in real time.
The clear filter bowl allows a visual inspection of built up moisture and is removed through a spring loaded valve at the bottom.
【Versatile Purpose】: Air filter pressure regulator prevents water from the airline or compressor contaminating paintwork.
【Lightweight and Durable Design】: 1/4 inch air spray gun pressure regulator, lightweight aluminum alloy design, durable and stable structure.
Compact oil water trap filter could be used with air and spray guns.
【Application】: Oil water trap filter separator tool is suitable for paint spray gun and air compressor matched used with gun pneumatic tools and hoses, suitable for vehicle, marine, construction, woodworking, furniture making, paintwork etc..

Check Stock

TOCOLES Tire Gauge Pencil, 2Pcs Pencil Tire Pressure Gauge PSI (5-50) with Tire Tread Depth Gauge and 8Pcs Tire Valve Stem Caps

[VALUE PACK] - Come with 2 pieces tire pressure pen, 1 piece tire tread depth gauge and 8 pieces tire valve stem caps, 11 pieces in total, enough quantity for daily use and replacement.
[WELL MADE] - The tire pressure gauge pencil is made of stainless-steel metal and zinc alloy, anti-rust and anti-corrosion, sturdy and durable. The car tire gauge is designed with a heavy-duty head, prevent air leaks at the nozzle. The ABS scale plate features clear marks, accurate and reliable.
[EASY USE] - Twist off the valve cap, press the head of the car pressure gauge into the gas nozzle, then the scale plate will slip out and you can read the tire pressure from the scale plate. After use, twist on the valve cap and push the scale plate back. No battery needed.
[HUMANIZATION DESIGN] - The pencil type tire pressure checker adopts 45 degree angle single head for easy operation and strong seal. Pocket-size air tire pressure gauge is designed with pocket clip, portable and easy to store.
[WIDE APPLICATION] - Our tire air pressure gauge for tires has three indicator, namely PSI (5-50), KPA (50-350) and BAR (0.5-3.5), perfect for checking tire pressure of cars, trucks, vehicles, motorcycles, bicycles etc..

Check Stock