ReviewsWater Pressure Regulators

TeeJet 23120-3/4-PP Pressure Regulator with 200 PSI Pressure Gauge (Bundle, 2 Items)

  • Gas Type- 2 Positions, LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4" &10" Water Column..
  • Fitting- in 1/2" x out 1/2" NPT Pipe threads. When apply to LP gas, it needs to work with an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator..
  • Safety - Our Pressure Regulators Pass CSA certificate for your safety. no gas leaks, ensures safety while using grill, air flow is kept stable and at appropriate levels..
  • Applications- Stable Gas flow, for Natural LP Gas grills, heater, oven, Gas Welding Equipment, NG gas pressure regulator.
  • Please take the Hex Screw out to check it's the correct side for your application. LP side and NG side is different. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator..
Check Stock

Milton 1114 3/8\ NPT Regulator

  • FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
  • Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
  • Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
  • 1/4" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/8" center mount..
  • Max Air Flow: 20 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..
Check Stock

Taprite Primary Keg Brass Beer Regulator With Commercial Pressure Gauge (Dual Gauge 742HPN)

  • Use this regulator on any High Pressure Tank with a CGA-580 valve..
  • Nitrogen tanks have a female thread (CGA-580), these regulators have a male thread..
  • Double Gauge Regulators Measure PSI, as well as the Volume of Nitrogen in the Cylinder..
  • This regulator has a duck-bill check valve which prevents back flow of liquid into the regulator..
  • 1P1P, CGA580 Inlet, 5/16″ Barb Shutoff w/Duckbill Check, 60lb & 3000lb gauges.
Check Stock

Taprite CGR283 3 Way Secondary CO2 Regulator

  • A secondary regulator will allow you to regulate the pressure of each keg individually..
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve.
  • Forged brass body for greater durability..
  • All regulators are pressure tested for leaks and defects prior to delivery.
Check Stock

1/4 Inch Air Adjusting Regulator Valve with Pressure Gauge and Water Trap Filter, 2 Packs, Oil Separator Water Pressure Regulator Air Compressor Regulator for Air Spray Paint Gun Air Pressure Cleaner

  • Small integration: you will receive 3 packs of air adjusting regulator valves, each including 3 parts, which are black part for air pressure regulators, blue part for water filter and the last part for stainless steel adapter.
  • Separating impurities: the transparent filter bowl allows a visual inspection of cumulative water and can filter airborne solid residues through a spring loaded valve at the bottom, such as pipe scale, rust, condensation from airlines.
  • Keep paintwork clean: air inlet measuring 1/4 inch and the overall length of 5.9 inch, the air compressor water separator kits fit into the paint gun and air compressor to prevent water, oil and impurities from polluting your painting work.
  • Safe and practical: with pressure regulator, you can see the working tool pressure clearly.
  • The sealing tape can be applied on thread part for nice prevention of air leakage.
  • Cleaning air passing through the pneumatic tools can extend the tool life span to some extent.
  • Wide applications: the air adjusting regulator valve is suitable for most spray tools and airlines, such as spray paint gun, air pressure cleaner, airline dryer and so on, which can be applied as a compact filter for air spray guns.
Check Stock

Ninja Air HPA PRO V2 SHP Series Tank Regulator – 4500 PSI

  • The air regulators change the fluctuating output pressure from your tank into a steady supply that provides a consistent and accurate function..
  • Please make sure that your maximum pressure regulation range is below 2800psi, otherwise it will easily cause the regulator valve to leak..
Check Stock

BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

  • Brand New BETOOLL Argon / CO2 regulator and flow meter..
  • Flow Meters are more accurate than the flow gauge regulators..
  • The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi..
  • And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators..
  • The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
Check Stock

25 psi Water Pressure Reducer Regulator for Drip Irrigation System, 3/4 inch Hose Thread, 150 psi Max Inlet Pressure, Lead-free Brass

  • Maintains water pressure between 20-30 psi (25 psi nominal). 0-6.5 GPM (gallons per minute) flowrate. Maximum Inlet Pressure: 150 psi. Note: As with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut..
  • Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). Connects to a standard hose bib or garden hose in USA and Canada..
  • It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25% lead..
  • Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight..
  • Note: Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time..
Check Stock

OTC 5630 Fuel Pressure Test Kit , Black

  • OTC's Fuel Pressure Test Kit quickly and easily locates any malfunctioning fuel system component - fuel filters, pressure regulators, fuel lines, and fuel pumps - without removing it from the vehicle.
  • Large, easy to read gauge features an impact resistant rubber encased housing.
  • High quality solid brass fittings, hose, and tubing for long lasting performance and reliability.
  • Convenient pressure relief valve allows for safe, clean testing.
Check Stock

72 inch Blue Giant Latex Balloon - Qty 1

  • ...ons same day of event. Latex balloons have an average indoor float time of 12-24 hours. Foil balloons can last multiple days if filled and stored properly. Balloons used outdoors will have a much less float time due to the elements. Foil balloons require a low pressure regulated foil inflator to inflate them. These regulators have an auto shut off pressure valve and will not over inflate them..
  • Balloons can usually be properly filled at your local party supply store, florist and even some larger grocery chains will offer helium. For larger balloons like these 72" and our 60", it may be more cost effective to rent a helium tank from a party rental company or local welding supplier..
  • WARNING CHOKING HAZARD: Children under 8 years old can choke or suffocate on broken balloons or balloons that are not inflated. ADULT SUPERVISION REQUIRED. Discard broken balloons immediately..
  • Keep the plastic bag containing these product away from small children. The thin film may cling to nose and mouth and prevent breathing. Dispose of bags immediately once product is removed!.
Check Stock

EXELAIR by Milton FRL Mini/Piggyback Air Filter & Regulator - 1/4 NPT - Polycarbonate Bowl Automatic Float EX25PB40A-02P - EX25FR40A-02P

  • FRL Air Filter Regulators: Removes water/particles, protects air tools, and prevents overdrying tools..
  • Piggyback: Compact Filter/Regulator duo that combines the functions of both parts. Most effective when space is limited- Save space on your wall..
  • Cast aluminum body. Locking adjustable pressure knob. 40-micron bronze sintered filter element. Dial Pressure gauge. Automatic/Manual full-time fluid drain..
  • 1/4" inch national pipe threads on both inlet/outlet. Polycarbonate Bowl: Full, transparent view of fluid level. Bowl Capacity: 1.4 OZ..
  • Max Air Flow: 20 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..
Check Stock