ReviewsWater Pressure Solenoid Valve

DIGITEN DC 12V 1/4 Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed

  • DC 12V 1/4" Quick connect Solenoid valve..
  • Working pressure:0.02-0.8Mpa. Its working temperature:32-158℉ (0-70℃)..
  • It will become hot because there are so many coils inside. It’s normal and safe phenomenon. The highest working temperature of this product reaches 60℃. If you want it works long hours, you should find a N/O normally open solenoid valve..
Check Stock

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

Surwit 15810-RAA-A03 VTEC Solenoid Spool Valve Assembly with Oil Pressure Switch & Gasket Compatible with Honda Accord Element CR-V 2.4L Civic Acura RSX 2.0L Part# 15810-RAA-A01 15810-PPA-A01

  • The VTEC system provides the engine with valve timing optimized for both low and high RPM operations. The VTEC solenoid actually allows oil to flow to the internal galleries of the overhead camshaft. This means that the housing of the solenoid is holding back full engine oil pressure. A spool solenoid valve can direct the flow of hydraulic fluid. The valve is made up of spools that rotate or slide to block and open channels in a hydraulic system..
  • This VTEC Solenoid Spool Valve Fits for 2003 - 2011 Honda Element 2.4L, 2002 - 2009 Honda CR-V 2.4L, 2003 - 2007 Honda Accord 2.4L, 2002 - 2006 Acura RSX 2.0L, 2002 - 2005 Honda Civic 2.0L..
  • Customers can find the product you need accurately according to the OE number. OE part number: 917-224, 15810RAAA03, 15810RAAA02, 15810-RAA-A01, 15810PPAA01, 15810PNEG01, 15810-RAA-A03, 917224, 15810-PNE-G01, 15810-RAA-A02..
  • While a VTEC solenoid rarely goes bad, problems with VTEC not engaging properly are extremely common. Most of the time incorrect wiring is to blame, but occasionally something even smaller is the culprit. When a solenoid is bad, may mean the solenoid's plunger is either mechanically stuck in a closed position and therefore always making contact which may eventually cause the starter motor to burn its w....
Check Stock

Kegco Premium Commercial Grade Dual Gauge Two Product CO2 Draft Beer Regulator

  • Dual stage construction & adjustable output pressure. Dual stage construction provides stable output pressure regardless of how much CO2 gas remains inside the CO2 cylinder, eliminating unpredictable catastrophes such as an end-of-tank-dump (EoTD). The output pressure is adjustable from 0-65 PSI based on customers’ different needs..
  • Modular manifold block design. Two manifold blocks are included. Each block comes with its own high-precision needle valve and can be operated independently. You may use one block for one aquarium or use both for two aquariums..
  • Safety and precision in mind. Our regulator has a built-in safety valve. It will open automatically to release the pressure when it exceeds 100 PSI. The integrated needle valve is precise. The CO2 output can be adjusted to as low as 1 bubble every 3 seconds..
  • Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. The solenoid is safe to touch and is very quiet. This solenoid is designed to work with an automatic timer..
Check Stock

1/2\ Brass Electric Solenoid Valve,110v Ac Brass Electric Solenoid Valve for Water Air Gas Fuel Oil

  • High quality normally closed electric solenoid valve:Model:2W160-15.
  • Size:1/2 inch,Working temperature range: 23-176°F；Pressure range：0-145Psi.
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket..
  • Applicable use in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.).
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us for a no-hassle refund or credit..
Check Stock

Aquarium DIY CO2 Generator System Kit CO2 Generator System with Solenoid Valve Bubble Counter Check Bubble Diffuser Carbon Dioxide Reactor Kit for Plants Aquarium

  • ✪【Be made of aluminum alloy】It is strong, durable and efficient. Well-sealed caps and pipes, leak-proof, non-deformed, never loose. Professional pressure guage for pressure watching. Cheap, simple to create pure CO2 constantly by chemical reactions..
  • ✪【Solenoid valve】To control the on and off of CO2 generator system using with a timer(not included). Bubble counter with check valve: Flow-rate of CO2 gas indication device and prevent water flow back into the bottle..
  • ✪【Equipped with a safety valve】The pressure is greater than 4kg pressure will relief automatically, carbonated beverage bottle pressure is 8kg, safety is ensured..
  • ✪【The safety valve supports manual pressure relief】When the pressure is below 4kg, it can be manually relieved by pull the ring of the safety valve. It is very safe..
  • ✪【Come with a bubble diffuser】Refine the bubbles and make it easy to dissolve in water and be absorbed by plants. Inject to your aquarium with CO2 quickly and easily..
Check Stock

Ximimark 2Pcs 1/2 Thread Plastic Electric Solenoid Valve Water Inlet Flow Switch Magnetic Water Air Normally Closed Tools DC 12V N/C 0.02 to 0.8mpa

  • The valve body is made of all-plastic material, with 4 points of external thread on both ends of the valve body. The valve body is simple, the power terminal is insert type, and the 6.3 spring is used..
  • The coil is packaged by the international top-grade coil packaging material, and has the advantages of waterproof, moisture-proof, wear-resistant, corrosion-resistant, high-low temperature resistance..
  • The insulation grade is high and the heat dissipation effect is good. Under normal conditions, the product can be used for a long time..
  • This valve is a normally closed solenoid valve, that is, it is energized to turn on (water), and the power is off (water cut)..
  • This is a micro pressure valve (pressure), suitable for 0.02-0.8MPA water pressure, please choose according to your actual needs..
Check Stock

mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)

  • Features: Base 20 Nozzle Kit Contains: - 1 - Max1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5-micron filtration, Outdoor Rust Proof Enclosure with on/off Switch.
  • - 60ft 1/4" Nylon Tubing-Black - 20 - HP Push Lock Misting Tees.
  • - 20- Stainless Steel Orifice Nozzles (0.006") - 1 - Push Lock End Plug - 2- Nozzle plugs - 2- Replacement Nozzles - 1- Drain Valve Assembly - Stainless Steel Mounting Clamps.
  • Specs:1500 PSI Misting Pump: 0.15 & 0.30 GPM - For up to 40 Misting Nozzles - Pressure Adjustment Valve to allow increase or decrease of the outlet water pressure. - Pump pre-set for ideal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
  • Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
  • However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
Check Stock

Beduan Brass Electric Solenoid Valve 1/2 12V Air Valve Normally Colsed for Water Air Gas Fuel Oil

  • Durable brass construction and a quality copper solenoid. And high quality copper coil, NOT aluminium coil..
  • Temperature Range: 41-185°F , Working Pressure: Water/Oil 0-0.5 Mpa.
  • High quality normally closed electric solenoid valve for air ,water or oil..
Check Stock

FZONE Pro Series Aquarium Dual Stage CO2 Regulator Adjustable Output Pressure with DC Solenoid and Integrated High Precision Needle Valve and Bubble Counter

  • Dual stage construction & adjustable output pressure. Dual stage construction provides stable output pressure regardless of how much CO2 gas remains inside the CO2 cylinder, eliminating unpredictable catastrophes such as an end-of-tank-dump (EoTD). The output pressure is adjustable from 0-65 PSI based on customers’ different needs..
  • Modular manifold block design. Two manifold blocks are included. Each block comes with its own high-precision needle valve and can be operated independently. You may use one block for one aquarium or use both for two aquariums..
  • Safety and precision in mind. Our regulator has a built-in safety valve. It will open automatically to release the pressure when it exceeds 100 PSI. The integrated needle valve is precise. The CO2 output can be adjusted to as low as 1 bubble every 3 seconds..
  • Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. The solenoid is safe to touch and is very quiet. This solenoid is designed to work with an automatic timer..
Check Stock

CO2 Pressure Regulator Magnetic Valve + Bubble Counter by Aquarium Equip

  • AZOO CO2 Pressure Regulator (Magnet Valve included) is a high quality product. It can be ready to install without any further setting or adjustment.....
  • CO2 Pressure Regulator (Magnetic Valve included) has passed quality testing. It is ready to install without any further adjustment..
  • POWER：100~240V 56-60HZ universal voltage.
  • ATTENTION： While using Solenoid Regulator, please slowly turn on CO2 tank to prevent to trigger the flame-proof switch inside Solenoid Regular.....
Check Stock