ReviewsWater Pressure Valve Adapter

Bathroom Shower Fixture Polish Chrome 8 Inch Rainfall Shower Head Set with Tub Spout Shower Faucet and Handheld Spray Wall Mount Double Cross Handle …

【Material】:Maximum Flow Rate:1.4 gpm. 5.29L/min.Polish Chrome finish, quality ceramic valve cartridges. High-quality brass construction ensuring durability and dependability.
【Functions】3 Functions, Overhead Rainfall Shower, Handheld Spray and Tub Spout. Diverter switches between top shower,and hand spray and tub spout. Either one works or the other.
【Feature】:8 inch shower head,shower height (slide bar) is Adjustable: 70cm-120cm(27.5"-47").
【Installation】:Wall mounted 2 holes installation, hole center distance: 150mm, Ship with adjustable adapter to adjust installation hole distance between 5 inch - 6.6 inch (13cm-17cm).Comes with all mounting hardware.
Cartridge inside it makes it pressure balance since will not work if doesn’t have hot and cold water going.That’s means pressure balanced.It doesn’t need a pressure valve installed.A pressure reducing valve is installed on the main water line coming into house.it reduces pressure from the city water main down to working pressure on the whole house not on an individual faucet.Due to code requirements .Would recommend to seek advice from local plumber before purchase to verify suitable size..

Check Stock

gotonovo Antique Brass Shower Fixture 8 Inch Rainfall Shower Head with Handheld Spray Dual Knobs Mixer Bathroom Triple Function Double Knobs Shower Combo Set Wall Mount

【Material】:Maximum Flow Rate:1.42gpm. 5.36L/min.Antique brass finish,quality ceramic valve cartridges.High-quality brass construction ensuring durability and dependability.
【Functions】3 Functions,Overhead Rainfall Shower, Handheld Spray and Tub Spout.Diverter switches between top shower,tub faucet and hand spray,Either one works or the other.
【Feature】:8 inch shower head,shower height (slide bar)is Adjustable between 100cm-140cm(39.4''-55'').
【Installation】:Wall mounted 2 holes installation,hole center distance: 150mm, Ship with adjustable adapter to adjust installation hole distance between 5 inch - 6.6 inch (13cm-17cm).Comes with all mounting hardware.
Cartridge inside it makes it pressure balance since will not work if doesn’t have hot and cold water going.That’s means pressure balanced.It doesn’t need a pressure valve installed.A pressure reducing valve is installed on the main water line coming into house.it reduces pressure from the city water main down to working pressure on the whole house not on an individual faucet.Due to code requirements .Would recommend to seek advice from local plumber before purchase to verify suitable size..

Check Stock

IBC Tote Fittings with Valve Tote Adapter 2.95' Coarse Thread Tote Ball Valve Heavy Duty Tote Tank Drain Ball Valve Connector for Water Liquid Container NPT DN50

...he life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water, etc.

Check Stock

HEYTUR Inflatable Boat SUP Pump Adaptor Standard Schrader Conventional Air Pump Air Valve Adapter Spoke Plate Attachment(Black)

It works on the majority of inflatable stand up boards. It is also suitable for boats and kayaks which also use the Halkey-Roberts valve for inflation.Use your compressor or tire pump to easily reach 20 PSI.Be very careful not to over inflate your board or craft, and check the board's pressure frequently..
This is an adaptor only. The speed at which your board inflates will depend on the pump used.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand hand pump until it becomes difficult to pump, and then use the adaptor to top off the pressure..
Remove your SUP valve cap and ensure that the valve is sealed for inflation by rotating the central pin into the outer/closed position.Insert the valve adapter into the SUP valve the same way as you would insert the pump hose nozzle. Connect any standard schrader pump to the valve adapter fitting to inflate your board. Monitor board pressure frequently while inflating!.
If you have any problems, please contact with us directly. Simply e-mail us the problem, the solution will be provided in the least time..

Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

...equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
✅【PERFECT COMPATIBILITY】 : The scuba tank’s inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
✅【HIGHT QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
✅【PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED 】:Our m....

Check Stock

IBC Tote Fittings, IBC Tote Adapter, 1/2' IBC Tote Tank Adapter Winterizing with 2' Coarse Thread for 275-330 Gallon, Leakproof Garden Hose Faucet Connector Replace Valve Set with Brass Spigot

...he life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water, etc.

Check Stock

Antique Brass Bathroom Shower Fixture 8-inch Rainfall Shower Head Sets Vintage 2 Cross Knobs Wall Mounted Mixer Bathroom Shower Combo Set Adjustable Handheld Shower Spray Triple Function

... shower height(slide bar can be adjusted between 100cm-140cm(39.4''-55'').
Installation:Wall mounted 2 holes installation,hole center distance: 150mm, Ship with adjustable adapter to adjust installation hole distance between 5 inch - 6.6 inch (13cm-17cm).Comes with all mounting hardware..
Cartridge inside it makes it pressure balance since will not work if doesn’t have hot and cold water going.That’s means pressure balanced.It doesn’t need a pressure valve installed.A pressure reducing valve is installed on the main water line coming into house.it reduces pressure from the city water main down to working pressure on the whole house not on an individual faucet.Due to code requirements .Would recommend to seek advice from local plumber before purchase to verify suitable size..

Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
Set includes a variety of adapters suitable for most vehicles.
Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).
4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
Steady, regular drop indicates that the valve is held open, burnt, or chipped.
Wide pressure fluctuation at high speeds indicates a weak valve spring.
Steady drop to zero pressure indicates a choked muffler.
EASY TO USE: Assembly and operating instruction manual included.
Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
Extra-long rubber hose and 14mm/18mm manifold adapter.

Check Stock

Tool Daily Pressure Washer Foot Valve for Sewer Jetter Kit, as Power Washer Ball Valve, 4000 PSI

Package include: 1-piece Foot Valve for sewer jetter kit, 1-piece coupler (3/8’’ quick connect socket+ M22 14mm male), 1-piece coupler (3/8’’ quick coupler plug + 3/8’’ male thread), 1-piece adapter (3/8’’ quick coupler socket + 3/8’’ male thread), 1-piece adapter (3/8’’ quick connect socket + 3/8’’ female thread)..
Operators of sewer jetting need both hands free to feed or retract the sewer jetter hose in the sewer line. Foot operated valve for sewer jet allows hands-free control..
Foot Valve for Pressure Washer Sewer Jetter Inlet: 3/8” female NPT. Foot Valve Sewer Jet Kit for Pressure Washer Outlet: 1/4’’ female NPT. Max Flow: Up to 8 GPM. Max Temperature: 320 °F. Maximum Pressure: 4000 PSI..
Steel Cover for safety, Heavy gauge steel construction for durability & stability. Pedal and valve ball are in protective housing..
Foot Valve for Sewer Jetting is excellent accessory for sewer hose operation. Inlet & outlet positioned to help keep hose out of the way. Sewer jetter kit for pressure washer also can be used in other applications..

Check Stock

hygger Upgrade Aquarium Water Changer Kit, Semi-Automatic Fish Tank Gravel Cleaner, with 25 FT Water Hose, Flow Control Valve

...nd large fish tanks. No spill, no mess and no heavy lifting for changing dirty water and adding clean water.
【Aquarium Gravel Cleaning 】When you use this water changer to suck away aquarium dirty water, you can move the gravel tube to cleaning the gravel or install the duckbilled on to clean fish feces. With the pressure from the water, the gravels and sands can be sucked up to the gravel tube then to vacuum out the debris in gravel.
【Non-electric & Quiet】this aquarium water changer is not electric, no noise no disturb to your fish or plants. All you need to do is to control the 2 valves and open the faucet. With 2 orange built-in control valves on the water changer, to turn it on or off you just need to rotate the valve by 1/4 turn up or down. To add clean water in to aquarium, please remember to keep the water flow assembly valve closed, so when you open the faucet the water will flow into the hose.
【3 sizes available】choose the size according to the distance from your fish tank to the sink faucet, flexible water hose length available: 25ft, 33ft, 49ft. The inner diameter of the hose is 1/2 inch. Each pack comes with a 15/16" threaded faucets adapter (large diameter: 23.8mm) , a M21 threaded faucets adapter (large diameter: 21mm), and a 3/....

Check Stock

AstroAI Digital Tire Pressure Gauge with Presta Valve Adapter（4PCS）

DVANCED ACCURACY: Professionally calibrated to always return an accurate reading within 1% of the exact pressure of your tire. No more guessing! Accurately measures in a range from 3-250 PSI (0.2-17.2 Bar.
ALL-IN-ONE FEATURES: The LED backlit screen features measurements in PSI, KPA, Bar, and Kg/cm^2.
Includes an inflator, straight locking chuck, gauge, hose, and bleed valve, all in one unit.
Compatible with both ¼” and ½” NPT air compressors outputs.
CONVENIENT INFLATE: This presta valve adapter can convert your presta valve to schrader, so you can inflate your tire by a standard schrader pump and car air compressor. Much cheaper and less wasteful than buying a new tube!.
EASY TO INSTALL: Please loosen the tip of the presta valve to a suitable place, and take a few seconds to screw on the presta valve adapter, then connect to a schrader pump or air compressor to inflate..
PACKAGE：Tire Pressure Gauge with Presta Valve Adapter（4PCS）.

Check Stock