ReviewsWater Pump Parts

Supco Washer Water Pump, Whirlpool Replacement Part No. LP116

TWO PORT WASHER WATER PUMP – This Supco water pump is a direct replacement for hundreds of OEM numbers for your direct drive washing machine.
HIGHEST QUALITY PARTS – The LP116 meets or exceeds OEM specifications.
EASY INSTALLATION – Washer pump mounts directly to the motor with 2 clips.
WIDESPREAD USE – Supco water pump fits most direct drive washers by Whirlpool and its various brand names including 3352492 (Whirlpool), 3348215 (Whirlpool), 3348014 (Whirlpool), 3363394 (Whirlpool), 3348015 (Whirlpool).
PORT MEASUREMENTS – 1-3/4 in and 1-1/4 in.

Check Stock

Clone Machine, Aeroponic Cloning Machine System 140 Site for Cuttings Rooting Using 1.625 Inch Neoprene Clone Inserts (1-5/8 inch)

INDUSTRY MADE CLONING MACHINE: not hand-made DIY thing. All engineering reliable parts for several years' use!.
AEROPONIC PROPAGATOR CLONING SYSTEM: Root your cuttings in 5-10 days and consistent 100% success rate one clone after clone. Relax and wait HortiPots Cloning Machine gives you the easiest cloning experience ever. With easy to follow assembly guide and clone tips to make cloning a simple operation.
Our cloning system comes with all parts needed including FREE fold-able clear Humidity Dome.
WORKS GREAT WITHOUT AIR PUMP: Multiple cords outlets and air venting/ circulating design on top lid needs no air pumping to get extra oxygen in and hot air out of growing chamber while patent pending spray manifold requires smaller water pump and generate less heat in water.
NO CLOGGING & NO WATER LEAKING : Our cloning machine pump is not only UL-listed for safety use, but also a quality water pump with pre-filter housing (extra spare) to keep cloner sprayers free from debris and preventing clogging when cloning aeroponically.

Check Stock

ECO-WORTHY 200W Solar Pump Kit, 24V Water Well Pump + 2pcs 100W Solar Panel + Controller for Off-grid Irrigation and Livestock Water - DELIVERY IN 2 PARCELS

[ 200W Solar Water Pump System ] – This 24V solar pump kit includes a high strength water pump, 200W solar panel, 20A charge controller and other necessary parts for the water pump system..
[ Warm Tips ] – Please don’t let the pump work without water for a long time, it may lead the water pump’s lifespan to be shortened. And please clean the pump regularly..
[ Nongeographic Restrictions ] – Charge whenever and wherever you want, can be powered by 24V solar panel system or 24V battery pack. It offers an ideal solution for remote watering without electric power..
[ Large Flow ] – Open flow: 6LPM/1.6GPM , MAX Pump lift: 230ft-330ft (70M-100M), Cable Length: 10 feet (3m), Suitable for pond, garden fountains, water circulation or for 4” or larger well etc..
[ Easy to Set Up ] – With all the necessary accessories, the all-in-one water pump system is easy to set up. The well pump is compact, lightweight, and easy to carry and use with no need for loud gas/diesel pumps..

Check Stock

TDRRICH Bottled Water Pump System Double-Tube Pressure Value 60Psi Flow 2L Drinking Water Dispensing Electric Pump for 5 Gallon Suitable for Coffee Ice Machines Refrigerators and Other Places

【BOTTLE WATER PUMP SYSTEM】:Water bottle pump 5 gallon electric 110V can provide power for 1-5 gallon plastic bottles.The water pump dispenser can....
【FOOD MATERIAL SAFETY SYSTEM】:Bottle water pump electric the parts in contact with liquid are made of food-grade material. It can be safely used....
【LESS NOISE SYSTEM】:The bottled water system is equipped with silencing rubber feet to reduce noise pollution. It is recommended to use 4 screws....
【SCOPE of APPLICATION】:Water pump for refrigerator can make it easier to use bottles of different shapes and sizes.Pump for water bottle can....
【24 HOURS AFTER SALE SERVICE】:We ensure all the water jug pump electric are new. Our pumps are tested for conformity before they are sold and....

Check Stock

Nenesupply10 Count Membranes Compatible with Medela Pump Parts Use with Nenesupply Valve and Medela Valve Replace Medela Membrane Compatible with Pump in Style Swing Symphony Harmony Breast Pump

NENESUPPLY COMPATIBLE 10 MEMBRANES FOR MEDELA BREASTPUMPS. Compatible with Medela Pump In Style, Medela Symphony, Swing, Medela Harmony Manual Pump and Mini Electric Breastpumps..
NOT ORIGINAL MEDELA PUMP PARTS. COMPATIBLE AND INTERCHANGEABLE with Medela Valves and Nenesupply Valves. All parts made by Nenesupply..
BPA FREE and DEHP FREE. All parts can be sanitized with boiling water or water steam..
SAME SUCTION AS OEM MEMBRANES. Easy to attach and remove..
FDA COMPLIANT FOR FOOD CONTACTS. Made by facilities in compliance with FDA quality system..

Check Stock

Maymom Pump Parts for Spectra S2 Spectra S1 21mm Flange Valve Tube Bottle Backflow Protector Not Original Spectra S2 Accessories Replace Spectra Duckbill Valve Spectra Bottle Spectra 21mm Flange

Kit Contents: 2 Flanges ( 21 mm small flange), 2 Duckbill Valves, 2 Backflow Protectors, 2 Tubes, 2 Bottles (with One-Piece Travel Cap). Work with....
All pump parts made by Maymom. Not Original Spectra S2 Accessories. Not Original Spectra S1 Accessories. Not Original Spectra Pump Parts.
Compatible and interchangeable with Spectra pump parts. Same suction power as OEM parts. Replace Spectra Flanges, Spectra Duckbill Valves, Spectra....
The One-piece cap of Maymom bottle includes sealing ring for secure seal. NO waste of milkdrop. Design for travel and storage of formula or breast....
Material does NOT contain any BPA. Can be sanitized with water steam, boiling water or microwave-steam bags. Comply with FDA regulations for plastic....

Check Stock

WAYNE WWB WaterBUG Submersible Pump with Multi-Flo Technology,Yellow & 57729-WYNP WAPC250 Pool Cover Pump, Blue

Product 1: The pump should be unplugged once the water is no longer being moved, or pump will run dry..
Product 1: Assembled in the US with foreign and domestic parts.
Product 1: Multi-flo technology allows easy selection of the appropriate discharge for the application.
Product 1: Top discharge is perfect for tight spaces where water removal is needed.
Product 2: iSwitch technology turns pump on and off by sensing the presence of water.
Product 2: Plug in and leave the pump unattended for worry-free water removal.
Product 2: Strainer base filters debris to minimize clogging and keep pump from tipping over.
Product 2: Energy efficient, high flow, oil-free pump.

Check Stock

Kitchen Basics 101: 3363394 / LP116 Washing Machine Water Pump Replacement for Whirlpool Kenmore

TWO PORT WASHER WATER PUMP - This water pump is a direct replacement for hundreds of OEM numbers for your direct drive washing machine.
HIGHEST QUALITY PARTS - The LP116 meets or exceeds OEM specifications.
EASY INSTALLATION - Washer pump mounts directly to the motor with 2 clips.
WIDESPREAD USE - water pump fits most direct drive washers by Whirlpool and its various brand names including 3352492 (Whirlpool), 3348215 (Whirlpool), 3348014 (Whirlpool), 3363394 (Whirlpool), 3348015 (Whirlpool).
PORT MEASUREMENTS - 1-3/4 in and 1-1/4 in.

Check Stock

Mini Submersible Pump 50 GPH 3W Water Pump For Aquariums Fish Tank, Indoor&Outdoor Fountain Wave Maker Pump For Pool, Pond, Statuary, Hydroponics

【Ultra Quiet Design】: Our water pump is made with reliable high quality motor does not produce much noise, works so quietly and smoothly, provides you a quiet & piece environment. Applicable water temperature for this mini pump is 40℉ ~95℉.
【Adjustable flow rate】An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. The maximal flow rate can be up to 50 GPH. It can elevate column of water up to 2.0 ft. The submersible water pump equipped with 0.33" diameter nozzle, it is not easy to fall off and the flow is stable.
【Mini Size】Dimensions:1.5 x 1.5 x 1.1 inch, the mini size makes the submersible pump easy to hide or disguise in the water. The water pump able to help the aquarium to circulate water, create an environment close to nature for your fish, suitable for small to medium size aquarium, Fish tank, Pond, tabletop fountains, water gardens and hydroponic systems.
【Easy To Use】The mini water pump is composed with 6 parts, easy to take it apart and combine by hand without using tools, manual disassembly designed shell allow you clean the pum....

Check Stock

Duckbill Valves and Silicone Diaphragm Compatible with New Wearable Breast Pump,Breastpump Parts Include Breastpump Valve and Silicon Membrane Backflow Protector Membrane Replacement Parts

Material Safety - All breastpump parts that come in contact with breast milk are made of safe food grade silicone BPA free, giving you peace of mind....
Optimize Pump Performance - Worn or torn valves and membrane may contribute to decreased suction and/or milk backing up in tubing.Replace silicone....
Easy Cleaning - Wash breast pump parts after each use with warm soapy water and rinse well.made of silicone material. Can be sanitized with water....
Unique Leak-proof Function - Diaphragm and duckbill valve accessories can perfectly meet the accessories you need when using wearable breast pump. The....
Assembled Correctly - Incorrect assembly of parts can also lead to no suction or leakage. Please assemble the accessories correctly. Note: This....

Check Stock

Aeroponic Cloner Machine, Cloning Machine 35 Site for Cutting Rooting Germination Kit Using 1.625 inch Neoprene Clone Inserts

INDUSTRY MADE CLONING MACHINE: not hand-made DIY thing. All engineering reliable parts, SOLD THOUSANDS WORLDWIDE SINCE 2016 WITHOUT MAJOR QUALITY ISSUE!!!.
AEROPONIC PROPAGATOR CLONING SYSTEM: Root your cuttings in 4-10 days and consistent 100% success rate one clone after clone. Relax and wait HortiPots Cloning Machine gives you the easiest cloning experience ever. With easy to follow assembly guide and clone tips to make cloning a simple operation.
FREE PROPAGATION DOME INCLUDED: Our plant cloning system comes with all parts needed including special-made foldable clear humidity dome (free) preventing leaf transpiration and initial transplant shock in the first few hours of cloning, especially in dry growing environment..
WORKS GREAT WITHOUT AIR PUMP: Multiple cords outlets and air venting/ circulating design on top lid needs no air pumping to get extra oxygen in and hot air out of growing chamber while patent pending spray manifold requires smaller water pump and generate less heat in water.
NO CLOGGING & NO WATER LEAKING : Our cloning machine pump is not only UL-listed for safety use, but also a quality water pump with pre-filter housing to keep cloner sprayers free from debris and preventing clogging when cloning aeroponically.

Check Stock