ReviewsWater Solenoid Valve Assembly

Spool Valve Assembly VTEC Solenoid with Timing Oil Pressure Switch and Gasket | for Honda Accord CRV CR-V Civic Si Element Acura RSX | Replace# 15810-RAA-A03 15810-PNE-G01 15810-PPA-A01 15810-RAA-A01

OEM FIT: This VTEC actuator has undergone a rigorous testing to ensure proper operating parameters to factory specification, exactly OEM design to replace your defective solenoid valve. Give you full control to accelerate the car beyond 3000 RPM with no hesitation.
PREMIUM QUALITY: The vtec camshaft solenoid utilizes aluminum valve bodies that are surface-treated to create micro finished surfaces for increased wear resistance, means you will get a fairly reliable solenoid assembly to perform excellently under all engine operating conditions.
FITS: 2003-2007 Honda Accord 2 Door Coupe, 03-07 Accord 4 Door Sedan, 2002 2003 2004 2005 Honda Civic Si Models, 2002-2009 Honda CR-V, 2003-2011 Honda Element, 02 03 04 05 06 Acura RSX Base L Models. Comes with oil pressure switch, gasket and heat shield installed.
REPLACE OEM PART NUMBER: 15810-RAA-A03, 15810-PNE-G01, 15810-PPA-A01, 15810-RAA-A01, 15810-RAA-A02, 15815-RAA-A02, 37250-PNE-G01. Robust spool valve filter screen design for greater resistance to leakage, improved durability and compatibility with a wide range of fuels.
24-MONTH WARRANTY: Oil flow rate, pressure and leakage are tested on every unit for years of effective performance. If the spool valve solenoid fails, stops working or any other problems, y....

Check Stock

HFS 110v Ac Electric Solenoid Valve Water Air Gas Fuels N/c - 1/2IN NPT Available 110V AC 1/2IN NPT

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 102mm*62mm (4.016" * 2.44"), thread diameter: 20mm (0.787"), interface pipe diameter: 1 / 2" NPT thread, flow diameter: 16mm (0.63").
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

Check Stock

DJ TRANS PARTS – 45RFE 545RFE 68RFE Solenoid Pack – Quality and Tested OEM product – Compatible with Dodge, Chrysler, & Jeep – Years 2004 and Up | Warranty Included with Purchase (RENEWED)

COMPATIBLE WITH – Here is a list of products that is compatible with this item. Feel free to google the part numbers as well to ensure it fits your vehicle. Compatible with Chrysler 300 2010-11 Valve Body Solenoid, Chrysler 300C 2010-11 Valve Body, Chrysler Aspen 2007-09 Valve Body Solenoid, Dodge Avenger 2010-11 Valve Body, Dodge Challenger 2010-11 Valve Body, Fit for Dodge Charger 2010-11 Valve Body Solenoid, Dodge Dakota 2004-11 Valve Body Solenoid, Dodge, Durango 2012 Valve Body Solenoid..
PRODUCT IS REMANUFACTURED OEM PART– All of DJ Trans Parts items are original OEM products. That being said, they are not brand new but refurbished. They are remanufactured and tested to ensure they work. This means you are getting the actual transmission, valve body, solenoid kit, etc. that your car needs. You can ensure our products will work with OEM parts..
PART NUMBERS - Here are the related part numbers of this item - 5RFE 545RFE 68RFE Transmission Solenoid Block Pack.
INSTALLATION VIDEOS ONLINE - Searching related installation video on the internet will be recommended. You can find these videos on Google and searching the part numbers online. We recommend to always wear eye protection and start with installation tools..

Check Stock

1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve

.WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
.2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
.Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
.This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
.1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..

Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/2IN NPT Available (12V DC 1/2IN NPT)

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' NPT thread, flow diameter: 16mm (0.63 '').
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

Check Stock

Surwit 15810-RAA-A03 VTEC Solenoid Spool Valve Assembly with Oil Pressure Switch & Gasket Compatible with Honda Accord Element CR-V 2.4L Civic Acura RSX 2.0L Part# 15810-RAA-A01 15810-PPA-A01

The VTEC system provides the engine with valve timing optimized for both low and high RPM operations. The VTEC solenoid actually allows oil to flow to the internal galleries of the overhead camshaft. This means that the housing of the solenoid is holding back full engine oil pressure. A spool solenoid valve can direct the flow of hydraulic fluid. The valve is made up of spools that rotate or slide to block and open channels in a hydraulic system..
This VTEC Solenoid Spool Valve Fits for 2003 - 2011 Honda Element 2.4L, 2002 - 2009 Honda CR-V 2.4L, 2003 - 2007 Honda Accord 2.4L, 2002 - 2006 Acura RSX 2.0L, 2002 - 2005 Honda Civic 2.0L..
Customers can find the product you need accurately according to the OE number. OE part number: 917-224, 15810RAAA03, 15810RAAA02, 15810-RAA-A01, 15810PPAA01, 15810PNEG01, 15810-RAA-A03, 917224, 15810-PNE-G01, 15810-RAA-A02..
While a VTEC solenoid rarely goes bad, problems with VTEC not engaging properly are extremely common. Most of the time incorrect wiring is to blame, but occasionally something even smaller is the culprit. When a solenoid is bad, may mean the solenoid's plunger is either mechanically stuck in a closed position and therefore always making contact which may eventually cause the starter motor to burn its w....

Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/4IN NPT Available (12V DC 1/4IN NPT)

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 74mm * 39mm (2.91 '' * 1.535 ''), thread diameter: 12mm (0.47 ''), interface pipe diameter: 1 / 4 '' NPT thread, flow diameter: 2.5mm (0.098 '').
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

Check Stock

Honeywell 32001639-002 Solenoid Valve Kit

Solenoid Valve Assembly For Conventional and Heat Pump Systems.

Check Stock

AOMAG® 1/8\ NPT DC 12V Electric Solenoid Valve 2 Way Water Air Valve Normally Closed

【Service Media】: Air, Gas, Liquid, Water 【Material】Anodized Aluminum.
【Valve Type】2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing..
【Port Coil Voltage】 12V Port size: 1/8" Female..
【Temperature Range】 23-176°F , Pressure Range : 115 PSI.
【Feature】This solenoid valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). . Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..

Check Stock

uxcell Solenoid Valve Water Inlet Seal Ring Gasket Normally Closed Seals Sealant Kits Accessories 1/2‘’ Thread

Advantage: If the seal ring is used for too long, it will naturally erode, then lose its function, or leak oil due to its poor function. Replace the new seal ring to make the solenoid valve work normally..
Applicable to the normally closed inlet valve and drain valve..
Total Size: 9.5x26mm/0.37‘’x1.02''(HxD).
Installation angle: Right Angle (90 degrees).
Package:1 x Solenoid Valve Water Inlet Seal Ring.

Check Stock

Power Speed Steering Valve Related Solenoid A2214600184 Fit for Benz C‑Class (W204) 2008‑2014

...ce the OEM number as a reference: A2214600184, which is made strictly according to the original materials and specifications, and is completely suitable..
☀☀ Applicable to: Fit for Benz C-Class (W204) 2008-2014, direct replacement, (see detailed description below)..
☀☀ Professional Manufacturing: The steering solenoid valve is professionally manufactured with high precision and high reliability. The solenoid valve is durable and stable in quality, and can be used with confidence..
☀☀ Easy to Install: This speed sensing steering solenoid valve is easy to install, remove and replace the old valve. No need for complicated tools, professional manufacturing ensures that we can provide you with higher quality products, which you can buy easily..
☀☀ Standard Specifications: It meets strict quality control standards and is reliable in use. Manufactured according to original specifications. Manufacture in strict accordance with factory quality control standards..
☀☀ Professional Manufacturing: The steering solenoid valve is professionally manufactured with high precision and high reliability. The solenoid valve is durable and stabl....

Check Stock