ReviewsWater Spigot For Dogs

Beverage Dispenser Replacement Spigot,Oak Leaf Stainless Steel Spigot Polished Finished, Dispenser Replacement Faucet

  • Notice: Wash before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
  • Multi-Function: The Oak Leaf Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage..
  • Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
  • Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our Oak Leaf Beverage Dispenser Replacement Spigot, just contact us, we’ll settle the issue according to your willingness..
  • Premium Quality: The Oak Leaf Beverage Dispenser Replacement Spigot is made of fine food-grade 304 stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
Check Stock

hgzaccompany 2 Pack Stainless Steel Spigot For Drink Dispenser, Replacement Metal Spigot For Beverage Dispenser, Water Dispenser Faucet, Food Grade Metal Spout.

  • Widely Applicable: The replacement spigot is made of high-quality food grade stainless steel, lead-free,anti-corrosion, very durable and good for health. Widely used in self-service drinks and restaurants, suitable for wine, water, tea, juice, etc..
  • Mounting diameter: This beverage dispenser replacement spigot fits 16mm or 5/8 inch openings, and the wall thickness does not exceed 17mm or 11/16 inches..
  • Note: Please clean the faucet before installation. Do not tighten the nut with excessive force. After installation, pour clean water to test whether there is leakage. If there is a leakage, tighten the nut again..
  • Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
  • Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock

Berkey Sight Glass Spigot for Travel Berkey System and Big Berkey System

  • View current water level in your berkey water filter.
  • Fits Travel Berkey water filter and Big Berkey water filter.
  • Replaces original spigot on berkey water filters.
Check Stock

NSEN Y Valve, HoseSplitter, 2WayYConnector, with RubberGrip(Green)

  • ... spouts are fastened with metal Bolts, and won't disconnect. The neck is affixed with threads, forever anchoring the two parts,ensuring superior durability to withstand high pressure and all weather conditions without breaking, rusting, or failing..
  • 2 Way Hose Splitter Design : The water hose splitter can converts 1 spigot into 2 water sources and easily control your water flow,hose splitter 2 way can support 0.8Mpa water press.The y hose splitter is also able to rotate 360 degrees, allowing you to tug and pull hoses in all directions.It can make your garden life easier..
  • Correct Size: The size of y hose connector is 3/4" (US standard).
  • our hose adapter splitter can match any American spigot. The length of the hose y splitter handles is 4cm, easy to remove. The y valve is coated with rubber, it is ideal for for stiff hands or hands with arthritis..
  • Easy to installOnly rotating the connector when splitter valve connects with your spigot. No Special Tools And Installation Experience, 100% Safe, Two-Way Water Hose Diverter Switch For Valve Water Can Be Adjusted to Save Water..
  • Easy to turn on and off: The hose y splitter with heavy duty metal body, comfortable and smooth rubberized grip,easy to turn on and off..
Check Stock

Beverage Dispenser Replacement Spigot, SUS304 Stainless Steel 5/8" or 16mm, Polished Finished, Dispenser Replacement

  • Easily and Quickly Installation: This Beverage Dispenser Replacement Spigot requires a 5/8 inch or 16 mm diameter opening for installation. It is suitable for dispenser walls up to 11/16″ or 17 mm thick..
  • Premium Quality and Healthy: The Stainless Steel Replacement Spigot is made of high quality fine food-grade #304 stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
  • Multi-Function: Beverage Dispenser Replacement Faucet is ideal for dispensing tea, kombucha, wine, water jugs, mason jars and beverage containers. Suitable for all Berkey stainless steel models. Not suitable for Berkey Light..
  • Easy to Clean: The Dispenser Replacement Spigot provides steady flow of your beverage and do not clog after easy installation. You can rinse thoroughly by clean water before use or clean it by dishwasher..
  • LIFETIME GUARANTEE AND WARRANTY: If you don’t like our Beverage Dispenser Replacement Spigot at any time for any reason, will will give you your money back immediately. We stand behind all of our products without reservation, and we use them in our home every day..
Check Stock

Outdoor Faucet Covers for Winter, Reusable Outside Faucet Insulated Cover Socks for Freeze Protection Garden Hose Bibs Water Spigots Insulation Protector (Black 4PCS)

  • Enlarge Size – 10” height x 6.3” wide opening (26cm x 16cm), fits for most standard wall faucets. It is about one inch or two larger than most of other faucet covers, so that it can reach the side of your house, cover every inch of your outdoor spigot..
  • Upgraded Materials for Freeze Protection - Made of 3M Thinsulate insulation and double layers 420D Oxford waterproof coating cloth help protecting your outside spigot during the harsh winter or UV damage in hot summer. Prevent faucet pipes freezing, bursting and blowouts, which may cause expensive repairs..
  • Drawstring Makes It Easier to Use - Put the cover on the faucet and tighten the drawstring, 2 seconds to finish. No more tools and screws. Keep your faucet cover in place and no worry dogs to get it away. Works well with various faucet types, such as garden spigots, hose bibs, water taps, etc..
  • Avoid High Repair Costs - Protects your outdoor faucets from freezing, bursting and blowouts due to the severe weather conditions like snow, rain, wind and sun exposure heating. Avoid expensive cost for valve replacing and repair every year..
  • 100% Satisfaction Guarantee - DEMEDO proudly offer a 100% risk-free satisfaction guarantee. If you experience any issue with this product, please feel free to contact....
Check Stock

Water Cooler Spigot fits for Rubbermaid Gott Cooler Valve (Pack of 1)

  • Brand New – Unused Parts Top Quality, Generic Aftermarket Part.
  • Water Cooler Spigot for Rubbermaid and Gott Coolers Discharge of 45 degrees.
  • Actual thread measurement is 1 1/2″ x 3/4″ Overall Length is 3 1/4″.
  • Kit Inlcudes Spigot with thread gasket 2 Rubber Sealing Gaskets Plastic Washer Plastic Nut.
Check Stock

Stainless Steel Beverage Dispenser Spigot Replacement Spout Metal Faucet Fits 34 inch opening for Water Dispenser Drink Dispenser Food Grade by GwenB ,(A002)

  • The Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
  • Fit Most of The Water Cooler, Water Dispenser, Water Bottle, Water Bucket, Juice and Ice Tea Brewers, Watermelon, Fruit Keg etc..
  • This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
  • Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Steel models..
  • and Friendly Customer Service: We have a commitment to every buyer 100 percent satisfaction. If you have any problems about our Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willingness..
Check Stock

10

  • ... painted. Sturdy, rustproof, and portable. It's the ideal choice for outdoor hose storage..
  • SUPER LARGE SIZE: 10.4 *4.3inch *4.3inch. Super large water hose hanger size makes for an easy fit to any size expanding garden hose, 25FT 50FT 75FT 100FT.
  • BENEFITS: Easy to use, no assembly required: Simply Hang on your water Spigot, Or nail the utility hooks wherever you want. Mounting hardware and screw plugs are included in the package.Hanging on faucet directly may not work very well, we advice to mount this hose hanger on the wall instead of hanging on the spigot.).
  • OUR HOSE HOLDERS: Excellent for home organization. Can perfectly store and hang your hose, also prevents any kinks, tangles or twists. Your backyard will look organized, neat and clean. Can be used for pool hose, garage storage, store extension cords, strollers, bike, etc. Say goodbye with confidence to loose piles that create an unsightly mess in your yard! This Hose hanger hooks over any outdoor spigot creating a convenient spot for storing a coiled hose neatly off the ground..
  • YOU WILL RECEIVE - 1pcs Heavy Duty Rust proof Garden Hose Holder, 4 sets of mounting hardware (screws and screw plugs) for easy installation (HOSE NOT INCLUDED)..
Check Stock

Reliance Products Aqua-Tainer 7 Gallon Rigid Water Container

  • Rigid, 7-gallon rectangular water container with molded contour grip.
  • Space-saving design for easy storing and stacking when empty. Spigot cap is reversible for safe storage and transport.
  • hideaway spigot for on-demand water dispensing.
  • Suitable for outdoors activities and emergency water storage.
  • NOTE: Prolonged exposure to direct sunlight will cause the water container to degrade and become brittle, increasing the chance of leaks. It is highly recommended to store water containers in cool shaded areas..
  • Five-year warranty against manufacturer's defects.
Check Stock

Mind Reader GALBDISP-SIL 3 Gallon Cold Beverage Dispenser, Leak Free Spigot, Serving, Galvanized Metal, Silver

  • ...r home made Iced tea, lemonade, sangria, rum punch, water and much more..
  • Durable – galvanized metal container holds drinks safely. High quality metal construction will last for years of usage.
  • Spill proof – metal top lid top prevents anything from outside getting into the drink.
  • Mess free – non-drip spigot prevents a leaky faucet. No more having to worry about your Table cloth or Table getting ruined by beverages.
  • Leak Proof Spigot – The spigot was designed with great attention to detail as it will not leak even when it is at full capacity and you have been pouring drinks all day..
  • Mess Free – The non-drip spigot prevents a leaky faucet. No more having to worry about your Table cloth or Table getting ruined by beverages. Most importantly you and your guest can pour drinks without having to worry about the spigot leaking juice or water on your shoes or clothing..
  • Easy Removable Lid – Comes with an easy to remove lid that allows you to add extra ingredients to your sangria like apples, grapes, oranges, pears and any other special addition you would like to add to your beverage..
  • Sturdy Stand – Includes a stand for your beverage drinks dispenser that is sturdy and....
Check Stock