ReviewsWatercraft Anchoring

Minn Kota 1810452 Talon Shallow Water Anchor 12 ft Black

  • Multiple Control Options: Control Talon from anywhere on the boat using your choice of options: Control Panel, Wireless Remote, Foot Switch, i-Pilot....
  • User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and standard....
  • Built-in Work Light: Illuminate the boat transom any time of day — or night. Includes two colors (white and blue) and each has three brightness....
  • Talon Remote: Lets you control stow, deploy, anchoring modes, multiple Talon selection and work light.
Check Stock

Rear Transom STAINLESS STEEL Ratchet Strap Tie Downs, Made in NZ - 1' x 2.5’ Heavy Duty Endless Tiedown with Floating PVC Hooks For Trailered Boats, & Jetskis - 2,400lbs Break Strength - Pack of 2

  • ..., provides added durability around salt water environments. Break Strength is 2,400lbs per Tie Down or 4,800lbs per pair. The webbing used features Polypropylene Yarn which does not stretch or lose its strength when wet - an important feature for marine tiedowns. Made to the highest standard so your Boat, Jetski or Watercraft is safely secured to your trailer..
  • QUALITY BOAT & JETSKI TIE DOWN KIT - Aerofast started manufacturing tie-downs nearly 40 Years ago in New Zealand. Designed specifically for Boats, Jetskis and Watercraft. They enable a range of distance between the attachment points on your Boat, Jetski or PWC and your trailer of between 12” and 30”. Designed as a single piece Tie Down with the webbing permanently fed through the ratchet, allowing for quick and easy setup. We use PVC Safety s-hooks, for ease of use and added safety.
  • EASY TO USE - Designed to be tough, durable and easy to use. Simply attach the hooks to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Position the ratchet away from your watercraft or trailer by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie down is tightly secured. Do not over tension as this could dama....
Check Stock

Nasty Bitch (Feat. Money Mark Of Tre+6) [Explicit]

  • PROTECTION—Our personal watercraft fenders are designed to protect the sides of your vessel. Constructed with the tough and resilient marine-grade vinyl, these fenders conform to the shape of your watercraft and are used for slow speed docking only.
  • INNOVATIVE DESIGN— These Taylor Made boat fenders are specifically engineered with a hook on the bottom that has a ‘hinge’ type action so you can quickly attach to the bond flange. Get the fenders built by the brand who has set the standard on design.
  • BUILT TO LAST—These boat fenders are made for resilience and durability. The football-needle inflation valve lets you easily adjust air pressure levels easily with a standard air pump. The fenders come with a suction cup and securing line.
  • FIT — Our PWC fender is designed to fit most watercraft profiles but is not a custom fit. It is important to note that you will experience varying and different levels of fit from these fenders based on the exact make, model and year of your vessel.
  • MADE IN THE USA — Built right here in the USA, boaters know they can trust the quality and durability of our quality fender when they are docking their vessel. Choose the PWC fenders that everyone is talking about-choose Taylor Made.
Check Stock

Taylor Made Products 144 Personal Watercraft Pickup Buoy (Rocket Red)

  • PROTECTION—Our personal watercraft fenders are designed to protect the sides of your vessel. Constructed with the tough and resilient marine-grade vinyl, these fenders conform to the shape of your watercraft and are used for slow speed docking only.
  • INNOVATIVE DESIGN— These Taylor Made boat fenders are specifically engineered with a hook on the bottom that has a ‘hinge’ type action so you can quickly attach to the bond flange. Get the fenders built by the brand who has set the standard on design.
  • BUILT TO LAST—These boat fenders are made for resilience and durability. The football-needle inflation valve lets you easily adjust air pressure levels easily with a standard air pump. The fenders come with a suction cup and securing line.
  • FIT — Our PWC fender is designed to fit most watercraft profiles but is not a custom fit. It is important to note that you will experience varying and different levels of fit from these fenders based on the exact make, model and year of your vessel.
  • MADE IN THE USA — Built right here in the USA, boaters know they can trust the quality and durability of our quality fender when they are docking their vessel. Choose the PWC fenders that everyone is talking about-choose Taylor Made.
Check Stock

Sika Anchorfix-2, super strength anchoring adhesive, Two component anchor system for threaded bars in uncracked concrete, 10.1 fl. Oz

  • Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive..
  • SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock..
  • USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems..
  • PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces..
  • APPLICATION: Applied with standard guns and by experienced professionals.
Check Stock

Kent Commercial Type I Collar Style Life Jacket, Adult Over 90 Pounds, Orange

  • Designed for extended survival in rough waters.
  • can turn an unconscious person to a vertical or slightly backward position.
  • USCG approved reflective material attached..
Check Stock

BoltHold - AK-4 Asphalt Anchor & Anchoring Cement Kit - Four 1500lb Pull Rated SP10-38 Chemical Anchors 5/8 x 6 with EPX2 Anchoring Cement - For Installation of Sheds Carports Bike Racks & More

  • ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout..
  • LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installi....
Check Stock

Edwards 3\ Classic Round Post-Green Sold Per PR

  • CREATE A SPORTS FIELD IN A FLASH: Badminton, Tennis, Football-Tennis, VolleyBall and Water Volleyball. To be Clipped on GARD&ROCK anchoring base (x2 not included).
  • TELESCOPIC POSTS: to set the height of the net up to 6.6 feet (2 meters) and choose your discipline Indexing and rotation locking to adjust net tension and game direction.
  • QUICK FIXATION SYSTEM: to easily and quickly mount and unmount your equipment on any type of flat or sloping ground (lawn, stabilised ground, clay surfaces,etc.) To be Clipped on GARD & ROCK anchoring base (x2).
  • HIGH QUALITY: Anodised Aluminum Net(adjustable from 16,5 to 23ft / 5 to 7m) and STORAGE BAG included PATENTED system.
  • WORKS WITH OTHER GARD & ROCK PRODUCTS: Anchoring base (428-001) / Stand for center pole umbrella (428-002) / Removable stand for side pole umbrella (428-007) / Sunshade post (428-011).
Check Stock

Lewmar Pro Sport 550 12V Windlass for 1/4 G4 Chain Manual Freefall Maximum Pull 550 lbs Port Side Mounted Gypsy for Boats 20 -30 - 2020201167

  • SIMPLIFY ANCHORING— Our windlass moves rope/chain with the push of a button. Anchoring has never been easier with our pro-sports windlass kit designed around a highly efficient spur gearbox, using smaller and powerful magnet motors.
  • EASY TO INSTALL — The Lewmar anchor windlass is quick and easy to install on your boat's deck. It features a Do-It-Yourself above-deck installation and a push button control for easy anchoring.
  • EVERYTHING YOU NEED — The Lewmar windlass has everything needed for a low-profile, anchoring system. The kit includes a windlass, circuit breaker, toggle switch, base gasket seal, mounting studs and installation wrench for power and sailboats 20'-30'and fits a 1/4" G4 chain.
  • COMPACT & DURABLE —The Lewmar horizontal windlass doesn't take up too much room on your boat and looks great on your deck. Constructed with tough composite aluminum, our windlass has a 550 lb. maximum pull, a XXXX motor watt and is ideal for boats under 30'..
  • TRUSTED BRAND — Our windlass kit is from Lewmar, the premiere equipment supplier- designing, manufacturing and distributing innovative, high-quality control solutions worldwide since 1946. Lewmar offers the highest levels of quality in the industry.
Check Stock

Best Marine Kayak Storage Rack. 2 Wall Mount Hooks for Kayaks, SUP Paddle Board & Surfboard. Kayak Hanger Racks & Straps. Indoor/Outdoor Cradles for Garage. Kayak Accessories with 100lb Capacity

  • Extend The Life of Your Sports Equipment: When you've found your perfect watercraft, you want to keep it in good condition for as long as possible. Using the Best Marine storage racks will help you do just that. Our wall mounts are strong and sturdy. They come with straps and fasteners so you can secure your watercraft on the mounts and keep it out of harm's way..
  • Suitable for Kayaks, Paddleboards, and Surfboards: Getting out on the water is fun, but once the recreation is done for the weekend, where do you store your watercraft? With the Best Marine storage rack, you can store kayaks, paddleboards, surfboards, and more. With its 100 lb carrying capacity, our storage rack is built to hold some of the heaviest watercrafts..
  • Gain More Space In Your Yard or Garage: Whether your kayak is leaning against the house, lying in the yard, tucked away in the corner of the garage, or laying in the middle of the patio, it can take up quite a bit of space. Gain some space and maneuverability back with our heavy-duty storage racks. They offer a safe and convenient way to store your watercraft. Our Wall Racks make the perfect creative gift for that kayaker that is in your life!.
  • Quick and Simple Installation: With Best Marine's storage rack, you don't have to rely....
Check Stock

Jetski Ratchet Strap Tie Down Strap - Made in NZ - 1\ x 8\’ Heavy Duty Tiedown with Floating PVC Hook - for Jetskis, Seadoo, Waverunner & PWCs - 1,800lbs Break Strength - 1 Strap (Blue)

  • ... fraying. You are buying directly from the manufacturer. These Jet Ski Tie Downs are designed for the tough USA conditions and made to last. We make the best sea toy accessories and do not compromise on quality.
  • QUALITY JETSKI, WAVERUNNER, PWC TIE DOWN KIT - These Tie Downs were designed specifically for Jetskis and Watercraft. They include a 3rd Hook for three point attachment, enables extra secure transport for your Jetski, Wave runner or Sea Doo on your trailer . These Tie Downs are designed with a Heavy duty rubber protector, permanently positioned behind the rachet to avoid damage to your watercraft..
  • SUPERIOR BREAK STRENGTH - The Break Strength for this product is 1,800lbs. Our Marine Tie Downs feature Polypropylene Yarn which does not stretch or lose its strength when wet - important for marine tie downs. All of our Tie Downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards of durability, giving you peace of mind that your Boat, Jetski or Watercraft is safely secured to your trailer or water toy tow hauler..
  • EASY TO USE - Designed to be tough, durable and easy to use. Simply attach the hooks to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet....
Check Stock