ReviewsWavecom Module

FOXWELL NT530 for Volvo Multi-System OBD2 Diagnostic Scanner Read Erase Error Codes

  • Upgraded version of the NT520 PRO scanner with improved hardware. Compatible with both OBDI and OBDII vehicles.
  • Service Features: Battery Reset, Injector Coding, TPMS, SRS, EPB, Brake Deactivation, Service Reset, Steering Angle Sensor (SAS) Calibration, DPF Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA (Throttle Body Alignment), etc..
  • Multi-System Diagnosis: Engine, Automatic Transmission, ABS, Airbag, Immobilizer, Climate Control, Fuel Pump Control Module, Fuel Injection Control Module, All-Wheel Drive Control, VG transfer case Module, Electronic Selector Module, Body Control Module, Digital Radio, Standard Radio, Drivers Door Module, HVAC, Instrument Cluster, Seat Memory Module, Theft Deterrent, Amplifier, Central Gateway, Immobilizer, etc..
  • Advanced functions such as Actuation, Adaption and Programming.
  • Expandable up to 5 car brands - Free Online Updates. One year warranty..
Check Stock

cciyu Engine Cooling Fan Control Module Fit for 2006-2011 for Crown Victoria 2015-2017 for Focus 2006-2011 for Lincoln Town Car 2007-2011 for Mercury Grand Marquis 2006-2009 for Pontiac Solstice

  • ❥FIT VEHICLES - 2006-2011 for Crown Victoria 2015-2017 for Focus 2006-2011 for Lincoln Town Car 2007-2011 for Mercury Grand Marquis 2006-2009 for Pontiac Solstice 2007-2010 for Saturn Sky.
  • ❥FEATURES OF COOLING FAN CONTROL MODULE - When the vehicle speed of the vehicle is greater than 0 KPH and the power take off unit is engaged, the fan control module raises a setpoint of the engine coolant temperature to reduce the fan speed demand processed from the engine coolant temperature, the power take off status information, and the vehicle speed..
  • ❥EASY INSTALLATION - Step 1: Check the fan control module. Step 2: Locate the fan control module. Step 3: Unplug the connectors for the fan control module. Step 4: Retaking off the Fan control module. Step 5: Installing the new fan control module. Install the new fan control module in place of the one that was toke off..
  • ❥PAKCAGE INCLUDING - We offer 1 piece of well performance Engine Cooling Fan Control Module and buy with confidence..
  • ❥NOTE - Please never mind searching for See all vehicles or look though the description of the item including the picture compared.
Check Stock

Tii 95s-1-12 Whole House Nid Dsl Filter Adsl Pots

  • Module’s unique design provides customer bridging and ADSL POTS splitting - all in one module..
  • Module easily snaps in and out of the customer side of the NID and occupies only one position, thereby not compromising the NIDÂ’s overall....
  • The Tii splitter design makes it possible to use a single phone line to provide triple play services including ADSL2+ and IPTV..
  • With module installed, an additional standard POTS line module is not needed..
  • Module includes Tii’s unique patented switchable RJ-11 Jack. The Auto-Jack does not require an RJ-11 plug for normal operation and delivers....
Check Stock

ICC/Intervox MEO-627PN-02-643, Condenser Microphone 6.0 X 2.7

  • DEPENDABLE TO USE: The Mic sensor sound module is professional manufacturing, voice detection module has high performance, strong reliability, making sure safety use..
  • MAIN FUNCTION: This microphone sound detection module can detect sound strength of the environment, with high accuracy, great for professional usage..
  • ANALOG OUTPUT: The microphone sensor sound module supports analog voltage signal output, the signal amplitude is VCC/2, stable to use..
  • ADJUSATBLE GAIN: The mic sensor voice module has high sensitivity, built in amplifier circuit, and the gain can be adjusted as needed..
  • AD COVERSION: The microphone voice detection module can obtain the voltage signal of sound intensity through AD conversion..
Check Stock

HiLetgo HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module.
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234.
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode..
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.
Check Stock

Bose Bass Module Connection Cable

  • Bose Bass Module Connection Cable for use with the Bose TV Speaker.
  • A 15′ (4. 6 m) cable with 3. 5 mm connectors for a wired connection from a Bose Bass Module to the Bose TV Speaker..
  • Expand your system with an optional bass module for a more heart-pounding, cinema-quality experience..
  • The Bose TV Speaker requires a wired connection and is compatible with the Bose Bass Module 500 or 700.
  • This an optional cable wire for expanding your Bose TV Speaker to connect to a Bose Bass Module.
Check Stock

HiLetgo 2pcs HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module.
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234.
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode..
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.
Check Stock

2pcs Ultrasonic Module HC-SR04 Distance Sensor with 2pcs Mounting Bracket for Arduino Uno R3 Mega 2560 Nano Raspberry Pi 3 Smart Robotics Projects

  • HC-SR04 Ultrasonic Sensor Distance Module:using IO trigger for at least 10us high level signal..
  • The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back..
  • If the signal back,through high level,time of high output IO duration is the time from sending ultrasonic to returning.Test distance = (high level time velocity of sound (340M/S)/2..
  • Resolution:0.3 cm,Module precision:blind spots (2cm)-SUPER CLOSE..
  • The module performance is stable,measure distance accurately.SRF05,SRF02 ultrasonic ranging module comparable.This module is compatible with GH-311 anti-theft module..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • -Arduino MEGA R3 (generic high quality) + USB cable -6xAA Battery holder (9VDC) -WiFi ESP8266 module -Model Bluetooth Master / Slave HC-05 -Box with plastic cells (organizer of components) -Shield for prototypes + Mini-Breadboard -Large Breadboard (830 points ) -Dupont Cables 10 * Female-Female + 10 * Male-Female + 10 Male-Male -Cable Jumper for breadboard -6 Push Buttons with multicolored caps -Joystick Module type PS2.
  • -RC-522 RFID Module with white RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 *....
Check Stock

5PCS HC-05 Wireless Bluetooth Receiver RF Serial Transceiver Module Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module

  • HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup..
  • Default baud rate:9600, Button: Press the button.
  • the module enter the AT mode. AT commands are executed only in AT mode..
  • HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection..
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your motherboard project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Note: The module doesn’t suitable for IOS system..
Check Stock

Logitech USB Unifying Receiver - 2 Pack

  • Applications: This device can be wildly used to wireless remote control,wireless audio,somatosensory devices, RFID, NFC, smart grid, smart home, etc..
  • NRF24L01 Wireless Transceiver Module with 125 Communications channels, multi-point communication and frequency hopping to meet the communication....
  • NRF24L01 wireless transceiver module built-in 2.4GHz antenna, small size, 15x29mm (including antenna).
  • it can be directly connected to a variety of....
  • The operating voltage of the wireless module is generally 3.3v, while the ordinary 51 microcontroller is 5v. This module is convenient to shop....
  • NRF24L01 Socket Breakout Adapter with NRF24L01 Wireless Transceiver Module.
Check Stock