ReviewsWeaved Nylon Hose

Mail Order Penelope

  • What You Will Receive: the package comes with 10 pieces of lint traps and cable ties for washing machine, enough quantity to meet your needs of daily use and replacement, you can also share them with your friends and family members.
  • One Size Fits Most: the products come with an appropriate size, the lint trap for washing machine is about 3.15 x 9.45 inches/ 8 x 24 cm, the cable tie is about 0.16 x 9.84 inches/ 4 x 250 mm, fitting most washing machines.
  • Thoughtful Design: the washer hose lint trap is designed with elastic band and equipped with quality cable ties, which can keep the lint trap firmly on the drain hose of the washing machine, not easy to fall off.
  • Prevent Drain Hose Blocking: the nylon mesh lint traps for washing machine hose have an elastic band at the opening, suitable for most washing machines, which can effectively prevent the drain hose from being blocked by clothes lint.
  • Reliable Material: the washing machine lint traps for drain hose are made of quality nylon fabric with fine mesh, sturdy and reliable, not easy to break or tear even after repeated application, able to serve you for a long time.
Check Stock

Cable Strap Storage for Cord Tool Heavy Duty Cord Magnetic Strap Hook Loop Extension Cord Holder Organizer Strap Hose Tie Wire Rope Accessories Wrap Wall Hanger for Garage House RV Basement 10 PACK

  • ...office, basement, garage,warehouse,storage shed,workshop,RV, boat, garden etc.eg long electrical cables and wires, network wires and generator wires, power cords and wired tools, washing machine hoses, garden and pool hoses, Air and vacuum hoses, as well as other large hoses.
  • 2 Sizes 10 PACK Heavy Duty: High-density weaved extension cord storage strap carries weight upto 50 lb or 22.6 kg. We provide 2 kinds of SIZE 13'' heavy duty storage strap and 17'' heavy duty storage strap to facilitate the use and selection of different occasions.Both are usage is simple and easy to operate.13'' straps having max wrapping diameter 3.8 inches.
  • 17'' straps having max wrapping diameter 5.1 inches.
  • Sturdy Durable Material: 900 denier blended textile cable holder,Hang all types of cords, ropes,hose strap hanger.Extension cord holder has strong premium quality metal,grommet and quality stitching make it strong enough to hold load for longer period of time.
  • Industrial Strength Hook Compact Durable Loop: Thick hook and durable loop works better than others (cycle life10000 times), can holds up to over 50 lbs 22kg on pegboard hooks. Rust-resistant metal grommet are suitable for most garage pegboard hooks for easily hanging and taking.
Check Stock

Pulldown Replacement Spray Hose Compatible with Hansgrohe Kitchen Faucets (# 88624000 Pull Down Hose Only) by Essential Values

  • COMPATIBLE DESIGN – Excellent Replacement Pull-Down Hose That Fits ANY Standard NON-SELECT & AXOR Hansgrohe Single-Hole Kitchen Sink Faucets.
  • LEAK FREE – Made From The Markets Highest Quality of Metals & Rubber So No Task is Too Big Or Small For This Pull-Down Hose. Our Strong Durable Nylon Hose is Built for Longer-Lasting Use with Less Headaches Than Your Worn Out Hose. Guaranteed Satisfaction Or Your Money Back!.
  • SLEEK FINISH – Bronze Connector with Tough Nylon Design That is an Extractable-Out Hose. Designed To Fit Hansgrohe Kitchen Collections: Allegro, Focus, Metris, Talis C, Talis S.
  • 100% QUALITY GUARANTEE - Buy with Confidence and Add to Cart Now! We Provide 100% Customer Support and 1 Full year product warranty. (Must DM Seller To Be Eligible) So Why Pay More for Similar Results With Name Brands? *FOR PULL DOWN HOSES ONLY.
Check Stock

Pullout Compatible Moen Sprayer Hose Replacement - Aftermarket Moen Hose Replacement for Kitchen Faucets (# 159560) - Fits in Place of Moen Kitchen Faucets Hose 159560

  • BEST VALUE – Essential Values pullout spray hose offers great value without compromising on quality. 55” inches long & compatible with moen faucet sprayer hose model 159560..
  • COMPATIBLE DESIGN – Our aftermarket moen hose replacement kit makes it easy to replace your worn out hose and faucets. Sized right our sprayer wand connector measures outside diameter: 11/16″” & inside diameter: 19/32″” with a stronger built brass connector..
  • SLEEK FINISH – The nylon, brass, & chrome finish gives this compatible moen pull out hose replacement the look and performance of new. Built sleeker & tougher than other brands for long lasting results!.
  • LEAK FREE – Made from the highest grade rubber and metal. Strong, durable nylon construction is built for long lasting use – or your money back! Comparable to OEM moen pull out faucet hose 159560..
  • 100% QUALITY GUARANTEE – Buy with confidence! We provide 365 day customer support and a 1 year product warranty. Why pay more? NOTE – Not compatible with Moen faucet hose replacement parts pulldown model 150259..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • ... - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
  • High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 degree PTF....
Check Stock

Pinkiou Airbrush Hose 6 Feet Nylon Braided Air Brush Hose with Standard 1/8" Size Fitting and a 1/4" Size Fitting for Connect Airbrush and Compressor (Airbrush Hose)

  • Premium 10 Foot Nylon Braided Airbrush Hose, ideal Hose for connect airbrush gun SP180KTG and compressor. Notice: This hose is not suitable for Pinkiou SP16 airbrush kit..
  • Material: Nylon Braided Hose. Braided wall construction resists kinking or twisting with excellent flex & durability.
  • Professional-artist quality at a price for hobbyists.
  • plus, hose looks as good as it performs!.
  • Popular 6-foot length allows easy movement & reach without being cumbersome.
  • Fits Iwata, Devilbiss and Pinkiou Airbrush Brands, as well as many other popular brands.
Check Stock

Hotwin 9.49mm SAE 5/16' 8mm Nylon Fuel Line Quick Connect Release Hose Disconnect Hose

  • ▶Fuel Line Quick Connect / Disconnect for Fuel / Gas and other common fluid types..
  • ▶Nylon Hose to ID=5/16" (8mm) Rubber Hose..
  • ▶Part number: 9.49mm SAE Fuel Line Connect..
  • ▶Please check the part number and pictures to verify this is the part you need..
  • ▶Package included: 9.49mm SAE 5/16" 8mm Nylon Fuel Line Quick Connect Release Hose.
Check Stock

Master Airbrush Premium 10 Foot Nylon Braided Airbrush Hose with Standard 1/8 Size Fittings on Both Ends Hose color may vary

  • Master Airbrush Brand Premium 10 Foot Nylon Braided Airbrush Hose.
  • Fits Iwata, Devilbiss and Master Airbrush Brands, as well as many other popular brands.
  • Genuine Master Airbrush Brand Quality Hose.
Check Stock

Grohe 46174000 59-In Metalflex Hose For Kitchen Faucet, Inch, Chrome

  • This 159560 hose fits ONLY all pullout Moen models and NOT the pulldown models. (All pulldown models use the Moen p/n 150259 hose.).
  • Quality Guarantee -- Our strong durable nylon construction is built for long-lasting use. High-quality metal and rubber provide a guarantee for the longer life of the hose. Density of ours: 3 strands X48 spindles..
  • This replacement hose for Moen pullout faucet is NSF CUPC certificated. Takes brass connectors Environmental and certificated PE tube with durable nylon wrapper..
  • It’ s exactly the same one that needed to be replaced for your moen pullout faucets.Only takes 4 steps to replace your old worn out kitchen horse. Easily and fantastic..
  • 100% QUALITY GUARANTEE – ONE YEAR MONEY BACK. Buy with confidence and add to cart now! We provide 100% customer support 3-year product warranty. Have any problem, please email us, we'll reply within 12 hours..
Check Stock

SAGUD Airbrush Hose 10 Foot Nylon Braided Air Hose with 1/8” Size On Both End and Adapter 1/8” male - 1/4” female for Most Airbrush Kit…

  • SAGUD Air brush hose is nylon braided outside and rubber inner with blue, black color, on both end is G/8”- G1/8”. The airbrush hose adapter is G1/8 male – G1/4 female..
  • This air hose has Standard 1/8" BSP male and 1/8" BSP female fitting. No more leak performance, 1/8" BSP for airbrush, 1/8" BSP for air compressor..
  • The rubber nylon airbrush hose is not affected by the season, It does not harden in winter or summer..
  • The length of this air hose is 10 foot (3m)..
  • GUARANTEE AND PROBLEM: Each item is test by inspection department to keep the goods is good working condition in your hand. Any problem we will provide the quickly reply..
Check Stock