ReviewsWeaver Scope Rings

Deer Forest Hunting

  • Fully-coated lenses provide maximum brightness, clarity, and contrast.
  • Durable, scratch-resistant, non-reflective matte finish.
  • Duplex reticle model includes 3/8" scope mounting rings ideal for rimfire and air rifles.
  • Diamond reticle models include weaver-style scope mounting rings.
  • Diamond reticle is specially designed for shotgun hunting and is perfect for turkey and deer.
Check Stock

MIZUGIWA 1 inch Cantilever Flat Top Weaver Forward Reach Dual Ring Rifle Scope Mount

  • Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings.
  • Heavy duty - Scope Mount Weight about 8.38oz.
  • Mount provides 2" of forward scope positioning on the .223 flat top platform.
  • Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for....
Check Stock

Monstrum Precision Picatinny Scope Rings | 1 inch Diameter | 0.80 inch Height

  • 0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek....
  • 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Check Stock

Monstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.00 inch Height

  • 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.20 inch Height

  • 1.20 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Lockdown Series Picatinny/Weaver Scope Rings | 30 mm Diameter | Black | Medium Profile

  • Sturdy 30 mm diameter scope rings for use with standard 30 mm scope tubes.
  • Base is compatible with all Picatinny and Weaver mounting platforms.
  • Torx locking screw system allows for quick yet powerful tightening while protecting from the screws from stripping.
  • The rings are available in three heights - low profile (15mm of clearance), medium profile (18mm of clearance), and high profile (22mm of clearance).
  • All Monstrum Tactical Lockdown Series rings and mounts include a lifetime guarantee.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings with Integrated Level Bubble | 30 mm Diameter | Low Profile

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings with Integrated Level Bubble | 30 mm Diameter | High Profile

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height - Low

  • 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Offset Cantilever Picatinny Scope Rings | 1 inch Diameter | Flat Dark Earth

  • The WH212 scope rings position the center of the scope tube at a height of 36 mm from the base, fits 1 inch, 30 mm and 34 mm tube optics.
  • Fits 20mm Picatinny rails and Weaver rails, net weight 153g(5.4oz).
  • Precision CNC machined from 6061 T6 aircraft-grade aluminum and finished in a colorful anodizing for unique appearance, passed rigorous accuracy and stability tests.
  • Disadvantage and Warranty: Due to the different lighting environments, there are slight differences between real objects and pictures. We provide a lifetime warranty for this product.
Check Stock