ReviewsWeld Coating

J-B Weld Plastic Bonder Black 25ml Syringe - 2 Pack (50139-2), 25 ml - 2 Pack

J-B Weld Plasticbonder (Black): A Quick Setting And Multipurpose Two Part Urethane Adhesive & Gap Filling System That Provides A Strong And Lasting Bond To Many Plastic Surfaces J-B Weld Plasticbonder Is Great For Diy Plastic Repairs, Filling Dents, Bumper Repairs And More. J-B Weld Plasticbonder comes in Syringe allowing for a 1: 1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Plasticbonder Takes 15 Minutes To Set And 30 Hours To Cure J-B Weld Plasticbonder Set And Cure Color Is Black..
Strength: J-B Weld Plasticbonder Has Tensile Strength Of 3770 PSI..
Surface Applications: Thermoset & Carbon Fiber Composites, Thermoplastics And Coated Metals, Plastic & Pvc, Concrete, Ceramic & Tile, Fiberglass, And Aluminum.
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, ....

Check Stock

PC Products PC-7 Epoxy Adhesive Paste, Two-Part Heavy Duty, 2oz in Two Jars, Charcoal Gray 27776

J-B WELD MINUTEWELD: A stronger and more permanent substitute to Super Glue J-B Weld MinuteWeld is an instant setting two part epoxy that will set in 1 minute under most temperature conditions J-B Weld MinuteWeld comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, MinuteWeld takes 1 minute to set and 1 hour to cure J-B Weld MinuteWeld set and cure color is clear.
STRENGTH: J-B Weld MinuteWeld has tensile strength of 2300 PSI.
SURFACE APPLICATIONS: Ceramic & Tile, Fiberglass, Plastic & PVC, Wood, Concrete, and Glass.
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

Check Stock

Powerbuilt All-in-One Unijack Pinch Weld Saddle Adapter, Protect Vehicle Frame, Car Lift - 240337

LIFT MORE: Adds Pinch Weld application to all Unijacks and All-in-One Jacks. Now lift right on the pinch weld point with these jacks without worry of damaging or bending the pinch welds in the frame..
EASY: Simply slide the pinch weld adapter onto the existing saddle riser of the All-in-One or Unijacks..
UNIVERSAL FIT: The Pinch Weld Adapter fits all Unijacks and All-in-One Jacks on the market. 640912, 620470 & 620471..
SAFER: The Pinch Weld adapter not only protects the frame of the vehicle from damage, but also also for more secure contact with the vehicle and will the wide platform straddling both sides of the pinch weld your vehicle will be more stable during lifting..

Check Stock

Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap

Scope of application: Weld On Billet Caps Aluminium Weld on Filler Neck does not need to be replaced frequently, with strong practical and durable. The filled neck with cover is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision m....

Check Stock

Secrets of Silicon Valley

J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performanc....

Check Stock

J-B Weld ClearWeld 14ml w/Static Mixer, (50114H)

J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!.
Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear..
Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI..
Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass..
Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..

Check Stock

Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO

◆【Fit for】 : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates..
◆【Material】: The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck..
◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.

Check Stock

J-B Weld ClearWeld 5 Minute Epoxy, Clear, Syringe, 2 Pack, 50112-2

J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear..
Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI..
Surface Applications: Metal, Most Plastics, PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass..
Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..

Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....

Check Stock

J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Translucent Yellow - 25 ml

J-B WELD PLASTICWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on various plastic surfaces (Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl). J-B Weld PlasticWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!.
CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticWeld takes 5 minutes to set and 1 hour to cure. J-B Weld PlasticWeld set and cure color is Translucent Yellow..
STRENGTH: J-B Weld PlasticWeld has tensile strength of 3900 PSI..
SURFACE APPLICATIONS: Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..

Check Stock

J-B Weld 8277 WaterWeld Epoxy Putty Stick - 2 oz.

J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..

Check Stock