ReviewsWeld Neck Flanges

Banjo TC206 2\ T-Bolt Hose Clamp

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS Aluminum V-Band flanges are made of 6061 aluminum and utilize a NBR o-ring to create an air-tight seal for positive pressure applications. Ideal for intercooler piping systems as well as intake systems..
  • The HPS Aluminum V-Band flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your aluminum tubing to the flange and allow unrestricted air flow. REMARK: Do not use HPS Aluminum V-Band kits for exhaust applications..
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

Maymom Flange 15mm Inserts Compatible with Medela, Spectra 24 mm Shields/Flanges, Momcozy/Willow Wearable Cup. Compatible with Medela Freestyle, Harmony, to Reduce 24mm Down to 15 mm; 2pc/Each

  • Maymom 15 mm inserts (Long) compatible with Medela PersonalFit/Spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 15 mm. Also compatible with Momcozy/LegendairyMilk/Tsrete Wearable 24mm silicone cups..
  • Maintain compatibility with most handsfree bra - Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm detachable shields having this insert inside..
  • Can be compatible with Spectra 24mm flanges, Ameda Purely Yours 25mm flanges, Ameda Mya Joy 25mm flanges, Willow 24mm flanges, Lansino 24mm flanges. Momcozy S9/S10/S12 Wearable Breastpump 24 mm cups ( NOT for 27 mm M1 cups).
  • Also fits Freemie 25 mm cup to reduce its nipple tunnel.
Check Stock

Willow Pump Willow Go™ Wearable Breast Pump Flange Set, 2 Pack | Breast Shield for Hands Free, Cord Free Double Electric Breast Pump | Clear, 24mm

  • REUSABLE FLANGES: Flanges are clear colored for nipple visibility and alignment for easy placement and fast assembly to ensure effective suction. Flanges are reusable, but should be replaced every 3 months for optimal performance..
  • HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast feeding accessory gives you the ability to pump directly into Willow Go Reusable Breast Milk Containers and easily transfer to a storage container or bottle when you’re ready to feed..
  • AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm, 24mm, and 27mm. In addition, 24mm flanges are compatible with sizing inserts for mamas who measure smaller than 21mm..
  • EASY TO CLEAN: Dishwasher-safe for easy cleanup..
  • USE WITH THE WILLOW GO PUMP: Exclusively designed to work with the Willow Go Wearable Breast Pump..
Check Stock

Maymom Flange Inserts 19 mm for Medela, Spectra 24 mm Shields/Flanges, Momcozy/Willow Wearable Cup. Compatible with Medela Freestyle, Harmony to Reduce 24mm Nipple Tunnel Down to 19 mm; 2pc/Each

  • Maymom 19 mm inserts (Long) compatible with Medela PersonalFit/Spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 19 mm. Also compatible with Momcozy/LegendaryMilk/Tsrete Wearable 24mm silicone cups..
  • Maintain compatibility with most handsfree bra – Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm detachable shields having this insert inside..
  • Can be compatible with Spectra 24mm flanges, Ameda Purely Yours 25mm flanges, Ameda Mya Joy 25mm flanges, Willow 24mm flanges, Lansino 24mm flanges. Momcozy S9/S10/S12 Wearable Breastpump 24 mm cups (not for 27 mm cups).
  • Also fits freemie 25 mm cup to reduce its nipple tunnel.
Check Stock

Maymom Pump Parts Compatible with Spectra S2 Spectra S1 Spectra 9 Plus Breastpump, Incl 24mm Flange Valve Tubing Backflow Protector, Replace Original Spectra Pump Parts or Spectra S2 Accessories

  • "Maymom aftermarket PUMP PARTS FOR SPECTRA S2 SPECTRA S1 SPECTRA 9 PLUS BREASTPUMPS. Made by Maymom. Not Original Spectra Parts. Incl 2 Flanges (24mm), 2 Valves, 2 Backflow Protectors and 2 Tubings. The flanges can only connect to WIDE MOUTH bottles..
  • "AFTERMARKET PARTS MADE BY Maymom. INTERCHANGEABLE WITH SPECTRA PARTS. All parts are interchangeable with Spectra Pump Parts. Can be used with Spectra flange, Spectra backflow protector, Spectra valve, and Spectra tubing..
  • "USED WITH WIDE-MOUTH BOTTLES ONLY. Use this kit with Spectra bottles, Avent bottles, and Maymom wide mouth bottles. DOES NOT work with OTHER WIDE NECK BOTTLES. CLOSED SYSTEM. No contact between milk and tubing..
  • "DIFFERENT FLANGE SIZE AVAILABLE: 19mm, 21mm, 24mm, 25mm, 27mm, 28mm, 30mm, 32mm. Refer to size selection guide in product photo to choose the right size for you..
  • "IN RETAIL PACK. All parts can be sterilized with water steam or boiling water. Do not contain any BPA. Tested by independent labs for safety..
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Ideal Tridon 5620051 Stainless Steel Quick Release Clamp with Steel Screw, 3/4\ to 1-3/4\ Diameter, 9/16\ W (Pack of 10)

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS 304 Stainless Steel Flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your stainless steel tubing to the flange and allow unrestricted air flow..
  • HPS Stainless Steel V-Band Clamp Kit with Stainless Steel Flanges includes 304 Stainless Steel Quick Release V-Band Clamp, Male/Female Stainless Steel V-Band Flange Set, Non-locking Nut and Self-locking Nut.
Check Stock

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

Willow Pump Breast Pump Flanges 2-Pack | Breast Shield & Nipple Visibility for Hands-Free Breast Feeding | Compatible with Willow Pump Milk Bags Clear 27mm

  • REUSABLE FLANGES: Flanges are clear flanges colored for nipple visibility & alignment for easy placement and fast assembly to ensure effective....
  • HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast....
  • AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm,....
  • PUMP AND STORE: After pumping, remove flange & milk bag and store in a cooler bag, fridge or freezer - and easily transfer to a bottle when you’re....
  • USE WITH WILLOW PUMP: Exclusively designed to work with the Willow Wearable Breast Pump Generations 2 and 3. The only wearable pump that is totally....
Check Stock