ReviewsWeld On Tie Down Points

US Cargo Control Aluminum L Track Tie Down System - 6 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
INCLUDES - 6 Pieces = QTY 2: 4' Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..

Check Stock

Weld-On Tie Downs 1/4 Steel Tri-angular Chassis Bracket 4

Made in the USA, with Domestic Materials.

Check Stock

Tie Down Strap Rings Tie-Down Anchors Hooks Stainless Steel Lashing Rings with Red Powder Coating for Tiedown Attachment Points for Dirt Bike, Motorcycle, Trailer, Pickup, Truck,Camper,RV (Pack of 10)

... ✅【Good Addition】- 10 Pack tie down anchors hooks can be easily installed almost anywhere there is a bolt, and support up to a 3/8" or 10mm hardware. You can use them to anchor any tie-downs, like ropes, bungee cords, truck bed cargo nets or straps. Widely used as tie down points for dirt bike, motorcycle, Jeep, trailer, pickup, truck, bed camper, ATV, kayaks, RV..
✅【Durable Material】- These tie down anchor rings are miracle workers! They look small but are very strong. Made of thicker heavy-strength stainless steel with black powder-coating, it makes the surface is flat and frosted for better friction. Stand up to the toughest weather, protects against corrosion and rust for long-term use..
✅【Dimensions】- The tie down hook ring with a length of 1.8", a width of 1.1", a height of 0.6" and a thickness of 3mm. The diameters of the mounting hole and anchor hole are 10mm and 20mm respectively. The angle between the mounting surface and the tie-down surface is 135 degrees, see the mechanical sketch image for a visual guide..

Check Stock

US Cargo Control Black Powder Coated Aluminum L Track Tie Down System - 8 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else! The black track has a powder coat paint finish to protect the aluminum, and resist scratches and scuffs..
STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
INCLUDES - 8 Pieces = QTY 4: 4' Lengths of Black Powder Coated Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Single Stud Fittings with Stainless Steel Round Rings. Does not include the mounting hardware..

Check Stock

US Cargo Control Black Powder Coated Aluminum L Track Tie Down System - 6 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else! The black track has a powder coat paint finish to protect the aluminum, and resist scratches and scuffs..
STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
INCLUDES - 6 Pieces = QTY 2: 4' Lengths of Black Powder Coated Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Single Stud Fittings with Stainless Steel Round Rings. Does not include the mounting hardware..

Check Stock

Torklift C2205 C3209 Pairs of Front and Rear Camper Tie Downs for Chevrolet Silverado 2500 GMC Sierra 2500

Fits: 2007 Chevy/GMC 2500 New Body - Regular/Crew/Extended Cab - 4x2 & 4x4 - Gas/Diesel - 6.5' Bed Length // 2008-2010 Chevy/GMC 2500 - Crew/Regular/Extended Cab - 4x2 & 4x4 - Gas/Diesel - 6.5' Bed Length.
Kit Includes: (2) Front Camper Tie Downs // (2) Rear Camper Tie Downs.
Product Details: Dramatic improvement with vehicle handling and stability // Avoids bed and bumper damage by attaching to the strongest part of the truck: the frame // Provides safety, security, and stability while on the road.
The only truck camper tie down that mounts using independent tie down points that bolt directly to the truck frame // Fast, no-drill installations.
No loss of ground clearance // Hidden design when not in use // Lockable with Tie Down Locks (*SOLD SEPARATELY*) // Legendary Lifetime Warranty // Made in the USA.

Check Stock

Putco 89895 Locker Side Rails for Silverado/Sierra

Putco's traditional locker side rail design features unique cut-outs in each bed rail end providing innovative tie-down points.
Solid die cast construction on the bed rail ends allows for extreme tie down strength.
Easy no drill installation via stake pockets.
Stainless tubes are chromed to 44 hour CASS.
Tubes and rails are backed by Putco's NeveRust Lifetime Warranty.

Check Stock

WELLUCK Boat Trailer Transom Tie Down Straps 2400 LBS, 1 Inch x 4 FT Heavy Duty Retractable Ratchet Straps Tie Downs to Trailer Marine Jet Ski Pontoon, with Quick Release Buckle & Anti-Scratch Hooks

RELIABLE TIE DOWN KIT: 1 Inch x 4 Feet (W x L). Designed to ensure high breaking strength of 2400 lb / 1089 kg and the working load limit of 800 lb / 363 kg. Ensure your boat from the water to the land safely. Enable a range of distance between the attachment points on your Boat, Jet ski or PWC and your trailer of between 12” and 48”..
PREMIUM WEBBING TECHNIC: Made by heavy duty nylon with high density webbing technic which make the tie down straps not stretch or lose its strength even getting wet..
ANTI-SCRATCH: Dual metal hooks are coated with soft PVC coating, and the HOOK&LOOP pads can cover the quick release buckles to avoid any scratch..
EASY & QUICK SETUP: Our ratchet straps are SELF-CONTAINED in the ratchet mechanism housing to use straight away. Just hook the end to designated tie-down points on the watercraft and trailer. Pull the strap to the desired length by sliding the ratchet up or down..
SECURE TRANSPORTATION: Stabilize your boat, Jet Ski and other PWC on trailer. Avoid damage to your Watercraft by minimizing movement while transportation..

Check Stock

2 Pcs M18x1.5 Thread Adapter, 304 Stainless Steel

【Material】The mounting bung is made of stainless steel(Stainless Steel 304 for corrosive environments, rigid and durable body design), easy to weld on O2 sensor parts, exhaust, headers, down pipes, etc..
【Installation】Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
【Size】M18X1.5 thread adapter, confirm the product size before buying..
【Parameter】Use for your custom sensor install, exhaust, down pipe, headers, exchangers and other installations where weld-in or weld-on metric connection is needed..
【Package include】 2 PCS M18 Mounting Adapter. It comes with 1 year warranty. Any problems just contact us to resolve..

Check Stock

Boat Tie Down Straps to Trailer | Boat Transom Tie Down Straps Made in New Zealand with Superior Strength of 2,400lbs UV Treated | 1\ x 2.5’ Heavy Duty Ratchet Boat Straps Trailer Tie Down (Pack of 2)

...e its strength when wet. All of our tie downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength..
Easy to use - Designed to be tough, durable and easy to use. Simply attach the hooks of your transon strap to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Position the ratchet away from your watercraft or trailer by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension as this could damage your watercraft..
Made in New Zealand - Our boat trailer transom tie down straps are manufactured in a state of the art factory using Swiss weaving equipment and UV stabilized polypropylene yarn from Spain. This means no damage from the sun. We use thicker, heavy duty webbing for durability and heat seals to prevent and minimise fraying. These boat trailer tie down straps have been designed for the tough USA conditions and made to last..
The Aerofast Guarantee - We live and breathe boat trailer tie-downs and we are the market-leading manufacturers of boat tie downs in New Zealand and Australia. Our reputation is built on the durability ....

Check Stock

Boat Tie Down Straps to Trailer (Pack of 2) - 2,400lbs Break - 1" x 2.5’ Heavy Duty Ratchet Boat Straps - UV Treated Boat Transom Tie Down Straps - Jet Ski Tie Down Straps - Made in New Zealand

...s go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength..
Easy to use - Designed to be tough, durable and easy to use. Simply attach the hooks of your transon strap to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Position the ratchet away from your watercraft or trailer by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension as this could damage your watercraft..
Made in New Zealand - Our boat trailer transom tie down straps are manufactured in a state of the art factory using Swiss weaving equipment and UV stabilized polypropylene yarn from Spain. This means no damage from the sun. We use thicker, heavy duty webbing for durability and heat seals to prevent and minimise fraying. These boat trailer tie down straps have been designed for the tough USA conditions and made to last..
The Aerofast Guarantee - We live and breathe boat trailer tie-downs and we are the market-leading manufacturers of....

Check Stock