ReviewsWeld Pipe Tube

uxcell Compression Tube Fitting, 3/8 NPT Male x Ф3/8\ Tube OD with Double Ferrules

【3/8 NPT MALE x Ф9mm(3/8") TUBE OD】Tube OD : Ф9mm(3/8").
【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding.
【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.

【1/8 NPT MALE x Ф3mm(1/8") TUBE OD】Tube OD : Ф3mm(1/8").
【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding.
【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.

welding glue high strength:- a b glue a liquid weld for metal has high strength and can sustain a load upto 2900 Psi, once welding glue is applied and cured properly..
Wide-range of applications:- This cold welding liquid can used as metal to metal glue, casting appliance, equally applicable to other surfaces such as wood and concrete. common application as small hole repair in metal , metal to metal adhesive, liquid metal filler, radiator repair and pipe repair..
long-lasting Bond Strength: forms a strong and stable permanent bond that should last for ages. Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years. can be shaped, tapped, filed, sanded and drilled depending on its purpose..
Simple-to-Use: The preparation and application are simple and easy, Just mix the weld metal repair paste, sets in minutes, and fully cured in 12-24 hours..
Package-includes: 25 gram of tube A + 25 gram of tube B + Scraper for mixing and applying the metal repair gel to the surface. NOTE: THE PACKAGING SHOWN IN THE PICTURES MAY VAR....

1 7/8 Inch Inlet 2.00 Inch Dia 8.00 In Long Turn Down Weld On Exhaust Tip.
Weld On Style fits a Exhaust Pipe 1 7/8 Inlet.
2.00 Inch Diameter Pipe 8.00 Inches Long.
Turn Down Style Tip (Please measure to make sure it fits your Car or Truck) 1 7/8 ID Pipe.

★Receiver Size: This trailer hitch receiver tube has 2 inch by 2 inch industry-standard fit.
★The weld-on hitch receiver is with 6 inch of total length.
★The tow hitch receiver tube is ready to Weld, with Raw Steel Finish.
★The weld-on trailer hitch tube is with 5/8 Inch Pre-drilled Hitch Pin Hole.
★This receiver hitch adapter can be used for custom welding project.

【Material】The mounting bung is made of stainless steel(Stainless Steel 304 for corrosive environments, rigid and durable body design), easy to weld on O2 sensor parts, exhaust, headers, down pipes, etc..
【Installation】Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
【Size】M18X1.5 thread adapter, confirm the product size before buying..
【Parameter】Use for your custom sensor install, exhaust, down pipe, headers, exchangers and other installations where weld-in or weld-on metric connection is needed..
【Package include】 2 PCS M18 Mounting Adapter. It comes with 1 year warranty. Any problems just contact us to resolve..

★Receiver Size: This trailer hitch receiver tube has 2 inch by 2 inch opening.
★The weld-on hitch receiver is with 9 inch of total length. Make sure you need this length of hitch box before purchasing it..
★The tow hitch receiver tube is ready to Weld, with Raw Steel Finish.
★The weld-on trailer hitch tube is with 5/8 Inch Pre-drilled Hitch Pin Hole.
★This receiver hitch adapter can be used for custom welding project.

【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8.
【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding.
【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.

Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.

Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains....
The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It....
Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam....
Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes,....

Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains No Solvents Or Volatile Organic Compounds (Vocs)..
The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It Creates A Permanent Bond Stronger Than Steel..
Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam Connections Or Holes..
Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes, Gas And Commercial Furnaces And Water Heaters..