ReviewsWeld Pipes

Hayes Digital Socket Fusion Pipe Welder Tool Complete Kit PRO (up to 2 in.)

Working range (Inches): ½ in. CTS – 2 in. IPS.
6 heating faces, 6 Chamfer tool and 6 Cold rings included sizes: 1/2 in. IPS - 3/4 in. IPS - 1 in. IPS - 1-1/4 in. IPS - 1-1/2 in. IPS - 2 in. IPS.
Voltage range: 110V -50/60 Hz - Power: 800W.
This machine can weld pipes made of: PPR, HDPE, MDPE, PE, PB.

Check Stock

20lb Outdoor Propane Gas Tiki Style Torch - Easily Transform Your Place Into an Elegant Paradise with this Portable 71 inch Long Burning Torch Lighting That Will Compliment any Yard, Pathway, Backyard

TRIPLE FLAMES: Powerful Triple Turbo Flame, heat up to 2383°F (1306°C).
RELIABLE: Manual Ignition, the most reliable ignition method. Equipped with adjustable flame control. Updated version for best use with BLUEFIRE MAPP Gas.
HIGH INTENSITY: Jumbo output of 25,590 BTU/hr, consumption rate is 551.4 g/hr (7.5 KW), powerful enough to weld large diameter copper pipes and do high heat treating jobs...
HEAVY DUTY: Heavy duty design, working perfectly in any circumstances. Stainless steel burner tube, and solid brass constructed regulator..
ABLE FOR PROFESSIONALS: Optimize designed for brazing pipes and rods with large diameters, capable to accomplish the hard jobs that single tube torches cannot do..

Check Stock

Dsycar Universal 1.5-2.25 Inch Adjustable Inlet Exhaust Tips, Bolt-On Design Chrome Plated Stainless Steel Exhaust Tailpipe Tips (Silver Curved )

【 Note 1 】Only fit 1.5’’-2.25’’ inlet pipes, please measure the outlet diameter of your pipe prior before purchase this exhaust tip. ( For all tailpipes, if the outlet size is 1.5 - 2.25 inch, then this exhaust tip can fit, no matter of your Year/Make/Model).
【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type. This one is suitable for curved exhaust pipes. (Pay attention: This exhaust tip is oval outlet, not round outlet).
【 Note 3 】View product details with image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose the right product size and your favorite color..
【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your Pipe..
【Car Decoration】Surface polishing process. More Car decoration can search Dsycar. Tips again, please measure your exhaust pipe diameter to make sure our products fit your vehicle..

Check Stock

J-B Weld FiberWeld 2” Pipe Repair Cast 2x60 Inch - High Strength Adhesive Fiberglass Wrap - White (38260)

J-B Weld FiberWeld 2” Pipe Repair Cast: A high-strength one-time use fiberglass wrap, impregnated with a specially formulated anti-corrosive resin providing a permanent & protective adhesion to a wide variety of pipes. When activated by water, the product forms a strong, permanent bond that hardens like steel in 15 minutes. All you have to do is wet, apply and let it dry and in 15 minutes it hardens like steel!.

Check Stock

BLUEFIRE HZ-8150 Double Heads Swirl Flame Self-Ignition Hosed Turbo Torch 5' long Hose Trigger Start MAPP MAP Propane Welding Blowtorch Nozzle for brazing large diameter copper pipes, Torch Only

TORCH ONLY: Gas cylinder show in the photo are for illustration only, no gas bottles are included. For the best performance, recommended to use with Bluefire Modern MAPP Gas, check our store for more information.
DOUBLE TUBES: Powerful Double Turbo Flame, heat up to 2383°F (1306°C), perfect for brazing larger diameter pipes and rods with large diameters, capable to accomplish the hard jobs that single tube torches cannot do..
5 FT HOSE: A 5 feet CSA certified hose is included, allowing more flexibility to working around. Auto-shut down function is applied for the hose design, assure maximum safety when the hose is accidentally leak or cut-off.
TRIGGER START: Equipped with Piezo-ignition trigger start, light up the torch with just one click! Equipped with adjustable flame control. Updated version for best use with BLUEFIRE MAPP Gas.
HIGH INTENSITY: High output of 17,060 BTU/hr, consumption rate is 367.6 g/hr (5.0 KW), powerful enough to weld large diameter copper pipes..

Check Stock

idain Universal Straight Type Stainless Steel Car Exhaust Tail Muffler Tip Pipes Fit Pipes Diameter 1.5 to 2.1

【Material】-High quality stainless steel mirror polished.Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and....
【Easy Installation】- There is no need to replace any parts.No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by....
【Design】- Surface polishing process.Bolt-on Tip straight-through muffler design reduces back pressure while absorbing sound waves..
【Wide Application】- Universal fits 2.5" Inlet exhaust system.Fit Pipes Diameter 1.5" to 2.1".

Check Stock

TOTALFLOW Natural Finish TF-SS2525 409 Stainless Steel 2.5 Inch X-Pipe-2.5' Dual (Inner Diameter)

X-crossover pipe stamped X-Pipe - 2. 5" inlet diameter, 2. 5" outlet diameter. Check product details below for other sizes..
Pipe have a gentler radius that allows for efficient exhaust gas scavenging, noise Cancellation and better balance between cylinder banks.
Designed to channel out the emitted gas from the engine of the vehicle.
Weld-on/ clamp-on h-pipes create power gain in low-end and mid-range torque. The H-pipe is recommended for those seeking that Classic deep American muscle sound on their vehicle..
409 Stainless Steel Construction for durability and corrosion resistance.
Made from heavy gauge material. TOTALFLOW is a California - USA based company.

Check Stock

Weld On Grab Chain Hook G70 3/8\ Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tow Tie Down Forged Steel Working Load Limit: 6600 lbs

Weld-on Type, Grab, Hook. Working load limit 6600 lb.. Size 3/8 inch, Grade 70, for use with 3/8 in chain.
The best hook-used for welding on the tractor bucket, it is very suitable for any field of use, and can be used with the following statements: weld on hooks weld chain hook weld on clevis weld-on clevis grab chain hooks weld tow hook weld hooks for buckets forks weld hook3/8 weld hook grab hooks 3/8weld on grab hook weldable hooks weldon hooks weld clevis hook 3/8weld on chain hooks.
Grab hooks work well with chains and ratchet binders for securing your load or for tow anchors..
Material: Forged Steel，Package Includes:4pcs hooks.
Note: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We make every effort to provide customers with satisfactory service. Feel free contact us by emails if you have any problems..

Check Stock

WeldingCity Acetylene Welding Brazing Nozzle 4-W-J (Size 4) with W-J Mixer for Victor J-Series Handles

PARAMETERS: 5x5x7mm large triangular welding tip: high temperature resistant 304 stainless steel alloy. Fixed Weld Head: High temperature 316 stainless steel. 5mm standard round mouth..
LARGE TRIANGLE WELDING TIP: concave welding tip (the plastic electrode does not move after welding), which is suitable for drawing and fixing before welding..
FEATURES: 100% new and high quality, good high temperature resistance, smooth welding surface, non-stick welding rod, no scratches on the welded surface, more beautiful..
COMPATIBILITY: Mainly suitable for replacement nozzles for heat guns equipped with diaphragm pumps and vinyl heat guns..
APPLICATION: Special welding tip for welding PP, PVC, PE sheets, water tanks, water tanks, plastic pipes, etc..

Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
This weld nut has a narrow body that is well suited for use in confined areas..
The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..

Check Stock

ABN Arrow Welding Magnet – Metal Working Tools and Equipment, 45, 90, 135 Degree Angle Magnet, 4 Pack of 50 Lb Magnet

...ing holders hold your metal pieces together at a variety of angles allowing you to work through without having to pause to move them.
The combined weight of a 4 pack makes it easy to work with heavy pieces of metal.
VARIETY OF APPLICATIONS: Whether you are welding soldering, assembly, marking off, or installing pipes, these magnetic welding holders are convenient.
These tools also come in handy as a floater or to be used with a crane.
BUILT TO LAST: Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion.
The center hole on the magnets allows you to easily grab the weld magnets.
Due to the extreme force of the magnets, always take care and keep away from children.
Wear protective eyewear in work area at all times.

Check Stock