ReviewsWeld Stainless Steel

Mounting Bungs and Plugs Stainless Steel M18 x 1.5 Thread Notched Style Exhaust Weld in Bung with Gaskets 2 Sets

  • The mounting bung is made of stainless steel, easy to weld on exhaust, headers, down pipes, etc..
  • Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • The bung cap can be used to seal sensor bungs that are not being used in the exhaust system. The gasket helps create a tight seal to prevent any....
  • The M18*1.5 bung features a notched style, making it easy to weld by having the curve sit against the rounded surface of the exhaust or downpipe..
  • The weld in bung and plug set features a straight thread size of M18*1.5 mm, which is suitable for most vehicles..
Check Stock

EEEkit 15 Pack Rotary Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

  • SPOT WELD CUTTER TOOL: It is easy to replace when the electric drill blades begin to dull. The package includes a 15 PCS 3/8 inches spot weld cutter..
  • WEAR RESISTANCE: Made of high-speed steel material, high hardness, and wear-resistant. The Center pin on the bit is spring-loaded. Sharp double-sided blades for high efficiency..
  • EASILY SEPARATION: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc, and cut small access holes..
  • DOUBLE-SIDED WELD CUTTER: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter. Double-sided 3/8 inch rotary blade and Hex Shank fit most drills..
  • APPLICATION: Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P, or other thin metal sheets..
Check Stock

HITBOX MIG Welder 200A 110V/220V Dual Voltage Color Smart LCD Display IGBT Inverter Multifunction MIG MMA Lift TIG Stick Gas Mix Gases Gasless Flux Cored Wire Solid Core Wire Welding Machine MT2000Ⅱ

  • ...rts gas, mix gas and gasless function. This welder can work with 0.8/1.0mm welding wire to weld 1mm-8mm thickness workpiece. When adjust the current, the wire speed and output voltage will be auto matched. Little splash, deep bath and smooth wire feeding bring you beautiful welding seam. Solid wire with gas welding stainless steel. Flux-cored wire without gas welding iron and carbon steel..
  • ★LIFT TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten to weld 1- 6mm thickness. Can weld stainless steel. If you need to use lift tig function, a WP-17V tig torch will be needed. Please kindly note that WP-17V tig torch is not included in this package..
  • ★ MMA FUNCTION - Current 22 ~ 185 amp. Can weld 2.5/ 3.2/4.0mm electrode. It can weld 2-12mm thickness. It is super easy to strike an arc, little spatter, stable current, and good performance..
  • ★ 1 YEAR WARRANTY AND GREAT AFTER SELL SERVICE- HITBOX welder offers good warranty. If the machine can not work have other problem when working, please contact us at the first time, we can help you to fix it and we have agent in the United States, our agent will repair it for you. If finally we can not solve the problem, we will send you a new replacement..
Check Stock

Spot Weld Cutter Set，13 Pcs 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool and 2 Replacement Blades,Metal Hole Cutter Remover for Power Drill Spot Welding

  • [Suitable]: Sharp double-sided blade, which is more effective in separating spot welded panels than panel cutting machines. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel. Suitable for stainless steel, iron, aluminum, F.R.P, or other metal sheets.
  • [Material]: The preferred material is high-quality steel, which has excellent heat resistance, high hardness, and wear resistance. The blade diameter is 3/8 inch, and the handle size is standard 1/4 inch..
  • [Easy to separate] The spot welding cutter drill can easily separate the spot welding plate without distorting the metal plate. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel..
  • [Package includes]: 1 drill bit with cutter, 2 guide pins., 10 x additional 3/8 "cutters. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
Check Stock

J-B Weld WaterWeld 1 Hour Cure Epoxy Putty Stick - 2 Pack Off-White 8277-2

  • J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

M6-1.0 X 25mm ISO 13918 Weld Studs Type PT A2 Stainless 400 pcs

  • ISO 13918 formerly referred to the DIN 32501 specification..
  • Weld studs allow for the joining of externally threaded fasteners to another metal part..
  • A2 stainless steel is functionally equivalent to 304 grade, also known as 18-8 stainless steel..
  • Stainless steel significantly improves resistance to tarnishing or corrosion..
Check Stock

Red Label Abrasives 1/2 X 12 Inch 220 Grit Aluminum Oxide Air File Sanding Belts, 20 Pack

  • Best for: weld removal, grinding, of non ferrous metals (aluminum, titanium, brass, Bronze, copper). Also great for ferrous metal (Steel, Stainless Steel, Cast Iron, Carbon Steel..
  • Premium material for general weld removal. Also works great as a multipurpose belt..
  • Premium Blue Fired Aluminum Oxide Closed Coat material with grinding aid reduces heat and buildup..
  • Ultra strong and Precision built bi-directional tape joint. Belts can be run in either direction..
  • We are the manufacturer! Factory Direct and built in USA by Red Label Abrasives. Guaranteed or Money Back..
Check Stock

Red Label Abrasives 1/2 X 18 Inch 60 Grit Aluminum Oxide Air File Sanding Belts, 20 Pack

  • Best for: weld removal, grinding, of non ferrous metals (aluminum, titanium, brass, Bronze, copper). Also great for ferrous metal (Steel, Stainless Steel, Cast Iron, Carbon Steel..
  • Premium material for general weld removal. Also works great as a multipurpose belt..
  • Premium Blue Fired Aluminum Oxide Closed Coat material with grinding aid reduces heat and buildup..
  • Ultra strong and Precision built bi-directional tape joint. Belts can be run in either direction..
  • We are the manufacturer! Factory Direct and built in USA by Red Label Abrasives. Guaranteed or Money Back..
Check Stock

Nelson Stud Welding INC. Welding Stud, TFTC, 1/4-20, 1/2 L, PK100 - pkg. of 100

  • ISO 13918 formerly referred to the DIN 32501 specification..
  • Weld studs allow for the joining of externally threaded fasteners to another metal part..
  • A2 stainless steel is functionally equivalent to 304 grade, also known as 18-8 stainless steel..
  • Stainless steel significantly improves resistance to tarnishing or corrosion..
Check Stock

Cup Drying Stander Holder for Cup Turner Machine Kit, Drying Stander Holder with Pipe, DIY Glitter Epoxy Tumblers Cup Turner Kit (Rack, White)

  • ...r strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Lee Women's Regular Fit Straight Leg Jean, Anchor, 14 Petite

  • Extremely rugged and corrosion resistant.
  • Bolt or weld to structure for fall arrest anchor point.
  • Compact 1/4" x 2" x 4-1/2" (6 x 51 x 114 mm) 304 stainless steel plate.
  • D-ring anchorage plate with zinc plated steel D-ring and 304 stainless steel plate.
Check Stock