ReviewsWeld Test Plugs

Goupchn Multimeter Test Leads Kit Back Probe Set with Replaceable Probes Set Banana Plug to Test Hook Leads Alligator Clips and Wire Piercing Probes for Electrical Testing Automotive Diagnostic

  • Multimeter test leads with 4mm standard safe banana plugs are made of high quality copper material which have strong conductivity, low resistance and no signal loss. Leads: CAT III 1000V,10A. Length: 3.3ft/1m..
  • Banana to alligator test leads are made of high quality copper material which are soft, flexible and durable. 4mm standard banana plugs can fit most multimeters. Copper alligator clips provide stronger conductivity and clamping force. Length: 3.3ft/1m. Rated current: 5A..
  • Wire piercing probes can be easily connected with the 4mm banana plug test leads. Perfect for wire piercing. No need to strip off the cables and no damage to the cables. Textured non-slip design enhances your comfort. High reliability and long service life..
  • 57PCS multimeter test leads back probe kit can be used not only for electrical testing, automotive diagnostics, testing and repairing, but also in physics laboratories, schools, homes and industries. Replaceable probes, banana plugs, alligator clips, wire piercing probes and test hook clips can help expand testing capability and flexibility..
  • List: 5PCS banana to alligator test leads, 2PCS multimeter leads, 8PCS replaceable probes set, 2PCS inner spring short needles, 2PCS banana to test hook wires, 15PCS back probes set, 5PC....
Check Stock

Spark Plug Tester Dual Holes Engine Ignition Coil Tester 500-6000rpm Working Frequency, Car Spark Plug Tester Tool with Protective Cover, Automotive Spark Plug Tester for 12V Gasoline Vehicles

  • ...cy, the stronger the spark intensity. It can be adjusted as needed..
  • 【Time-Saving and Efficient Spark Plug Tester】The working principle of the car spark plug tester is to test the performance of the spark plug at the same time by simulating engine work, which is more time-saving and efficient. Suitable for spark plugs of most 12V gasoline cars..
  • 【Plug-and-Play Spark Plug Tester Tool】Put the spark plug in the test hole, close the protective cover, connect the power supply and adjust the working frequency, and is equipped with a high-voltage indicator. You can easily observe the spark plug test status through the protective cover..
  • 【Ignition Coil Tester with Protective Cover】The automotive spark tester has a special protective cover design. Cover the protective cover before use to ensure the safety of the operator during the test and visually observe the test results..
  • 【NOTE】This spark plug tester tool is specially designed for testing spark plugs of automobile engines. Not suitable for testing the short plugs of lawn mowers, chainsaws or most small engines..
Check Stock

Hantek HT30A Heavy Duty Automotive Test Lead 3M BNC to Banana Adapter Cable

  • Hantek Heavy Duty Auto Test Lead/BNC to Shrouded Banana Plugs(Male) or Banana sockets (Female) Adapter/jumper Cable.
  • One side of the cable is a standard BNC Connector.
  • It get split into two Shrouded Banana Plugs and two banana sockets so a wide Range of Probes, Clips and Gators can be plugged into them.
  • This cable can serve other purpose as well..
  • The auto test cable (HT30A) is a kind of special line for assisting automobile measurement instruments to test various types of signals.
Check Stock

Goupchn Multimeter Test Leads Kit with Alligator Clips Wire Piercing Probes Banana Plug to Mini Grabber Test Hook Clips Wire Replaceable Precision Sharp Probes Set for Electrical Testing

  • Excellent Quality: Multimeter test leads with 4mm standard safe banana plugs are made of high quality copper material which have strong conductivity,....
  • Replaceable: Multimeter test leads set contains 4pcs 2mm copper needles and 4pcs 1mm gold-plated sharp needles. They can be switched to meet your....
  • Minigrabber: Copper alloy test hook clips are different from traditional. Higher quality and softer. The inner diameter of the copper wire is 1 cubic....
  • Wire Piercing: Wire piercing probes are made of stainless steel which can piercing the wires without damage. Probe thickness: 0.7mm. The other end is....
  • Wide Use: Multimeter test leads kit works perfectly with any multimeter and test instrument. Replaceable probes, banana plugs, alligator clips,....
Check Stock

AideTek Automotive Test Lead Kit Insulation Piercing test clip TLP20160

  • Two( One red + one black) 32 inch PVC lead extensions, Shrouded banana plugs at both ends, Whole length: 82cm (32.22 inch).
  • A pair of sharp Stainless Steel Needle Tipped Tip Multimeter Probes Test Leads.
  • Two ( one red + one black) modular 4 inch heavy duty test probe handles.
  • A pair of one Black/Red large crocodile clips, Safety Sliver plated alligator clip Rated voltage/current: CATIII 1000V/Max.32A, Metal material：Brass.
  • whole size: 83.5mm(3.3 inch) max jaw size: 27mm(1.06 inch).
  • Insulation Piercing Clip Set, Banana Jack Accepts Banana Plug Leads with rigis insulation sleeve, Color: Red, Black, Length 4 In" (143cm) , Stainless Steel Probe Pierces Insulation on Gauge Wire, Tip Material Stainless Steel, For Use With Banana Plug Test Leads, Accepts 4mm Banana Plugs, Includes (1) Red and (1)Black Probe.
Check Stock

Bosch Automotive (9603) OE Fine Wire Double Iridium Spark Plug - Single

  • Double Iridium firing pin and ground electrode inlay provide 4X longer service life compared to standard copper plugs.
  • 0.6mm fine wire firing pin provides superior ignitability and performance.
  • 360° continuous laser weld fuses corrosion resistant iridium firing pin to base for increased durability.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions..
Check Stock

Mechanical Test, Seal & Cleanout Pipe Plug, 3 9/16" to 4 1/8" Winterizing Pool Plug, Anti-Return Pipeline Plugging, Expandable Rubber Stainless Steel Marine Boat Drain Plug T-Handle

  • 【Convenient, Practical & Leakproof Plugs】The BOPOREAE T-Handle Drain Plug is a twist/turn pipe plug for a leak proof seal. The Premium Stainless Steel and Nitrile Butadiene Rubber (NBR) construction makes this rubber hole plugs resists heat, anti-freeze, oil and rust inhibitors, wear-resistant, wet-dry versatile and airtight.
  • 【What Is This Plug Used For?】This Universal Rubber Expansion Plug is an Adjustable Stainless Steel Scupper Plugs which can replace any standard 1" to 4 1/8""(25-105mm) test and seal plug for various Drainage Hole&Pipe Opening.
  • Round rubber pipe plugs can be used for Low Pressure & Leakage Test, Drain Pipe Sealing & Clean-Outs for Kitchen, Bathroom, Garden, Automotive, Construction Industry, Kayak and Marine Boats, etc..
  • 【How To Use?】The BOPOREAE pipe hole plug seal installs easily, no tool required. Turn the handle clockwise the rubber will be squeezed and expanded until the hole is clamped forming a leak-proof seal.
  • Turn the handle counterclockwise the rubber plugs returns for easy removal and next installation.
  • You will love this premium practical and convenie....
Check Stock

Fluke TL175 Twistguard Test Leads, 2 mm Diameter Probe Tips

  • Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements.
  • New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone insulation.
  • inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement.
  • TL175 test leads withstand high temperatures and remain flexible in cold temperatures.
  • Extra heavy duty strain relief on both probe end and plug end, tested beyond 30,000 bends without failure.
  • Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs.
Check Stock

Bosch F5DP0R Double Platinum Spark Plug, Up to 3X Longer Life (Pack of 1)

  • Double Platinum firing pin and ground electrode inlay provide 3X longer service life compared to standard copper plugs.
  • Fine wire design provides excellent ignitability and performance.
  • 360° continuous laser weld fuses corrosion resistant precious metal firing pin to base for increased durability.
  • 5 year performance satisfaction guarantee.
  • Original equipment, pre-gapped replacement delivering optimum fit, form and function.
Check Stock

Norton Gemini Portable Snagging Abrasive Wheel, Type 11 Flaring Cup, 5/8\-11 Hole Diameter, Aluminum Oxide, 4/3\ Diameter x 2\ Thickness, Grit 16 (Pack of 1)

  • Weiler Tiger AO 2 x 3 inch type 16 cones deliver the right combination of performance and value. Aluminum oxide grains in combination with a strong bond deliver long product life and a consistent cut-rate when grinding metal. The type 16 shape features a tapered design with a rounded face that is ideal for ID cleaning, hole edge beveling, smoothing weld seams, removing gates and parting lines, and cleaning castings in hard-to-reach places. These plugs offer a 3/8-24 inch arbor and are designed for use on die grinders. Whether you are in a fab shop, foundry, or shipyard, you can count on Tiger AO cones and plugs to get the job done fast and done right..
  • Aluminum oxide grains provide an even, sharp, clean cut-rate and consistent performance..
  • Strong resin bond delivers a long cutting life..
Check Stock

SereneLife MIG Welder Flux Core Welding Machine with Gas and No Gas, 130A DC 110V 220v IGBT Inverter Welder with Automatic Wire Feed, Welding Gun, Ground Wire, Brush, Mask, Dual Voltage Adapter

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock