ReviewsWeld Tool

Supercut Band Saw Blade Made in The USA 93 1/2-inch X 1/4-inch X .025-inch, 14 TPI Carbon Tool Steel Blade for Cutting Wood, Aluminum, and Other Materials

  • 100% MADE IN THE USA - Not made anywhere else but the USA..
  • 100% LIMITED LIFETIME WELD WARRANTY - Fatigue resistant premium carbon tool steel blade is built with the toughest alloys fused by our superior weld..
  • INTRICATE CUTS - Heavy duty and heat-treated raker tooth that can withstand sharp flexing and high speeds..
  • VERSATILE – Cut all types of wood and non-ferrous metals (copper, brass, aluminum)..
Check Stock

Mophorn Backhoe Thumb 36 inch Hydraulic Backhoe Excavator Thumb Attachments Adjustable Boom Tractor Excavator Weld On 1/2 inch Teeth Thick Steel Plate Assembly 12MM Bolt-On Design

  • Item Specifications: The tooth plate of this backhoe thumb is 32 inches long, 6 inches wide, and 1/2 inch thick. The weld plate is 19 inches long.
  • please measure your bucket before ordering to ensure a proper match..
  • Heavy-duty Steel Structure: Our backhoe thumb is made of heavy-duty thick steel and designed with a triangle structure. Thus, it has acquired excellent durability and stability. The surface is also powder-coated to resist corrosion..
  • Easy to Assemble and Weld: Each part of the thumb has been plasma cut for tight tolerance, and all necessary fittings are provided to make sure you can assemble and weld the high-quality backhoe thumb without trouble..
  • Bolt-on Design: The simple-and-convenient bolt-on design allows for easy removal when not in use.
  • the three mounting holes with different positions enable you to adjust the angle of the thumb according to your needs..
  • Wide Application: Many people around the world have widely used our backhoe thumb. It is considered a perfect attachment tool for tractors, excavators, and other equipment to help you pick up objects more easily..
Check Stock

Supercut Bandsaw Supercut Made in USA 70 1/2-inch x 3/8-inch x .025 x 4 Hook Premium Carbide Infused Bandsaw Blade for Cutting Wood Materials

  • 100% MADE IN THE USA - Not made anywhere else but the USA..
  • 100% LIMITED LIFETIME WELD WARRANTY - Fatigue resistant premium carbon tool steel blade is built with the toughest alloys fused by our superior weld..
  • LESS HEAT & CHATTER – Aggressive alternate hook tooth and polished design allows the blade to freely move through the material..
  • CLEAN CUTS – Precision ground, razor sharp teeth, polished back and sides for reduced friction and the cleanest cuts possible..
  • MINIMAL WASTE – The best blade for the serious woodworker cutting exotic woods, where waste is not an option..
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

Mophorn 18' Backhoe Thumb, 1/2' Teeth Thickness Heavy Duty Excavator Thumb, Black Steel Weld On Thumb Attachments with 12mm Bolt-On Design Adjustable Mechanical Thumb for Backhoe/Excavator

  • Item Specifications: The tooth plate of this backhoe thumb is 18 inches long, 6 inches wide, and 1/2 inch thick. The weld plate is 19 inches long.
  • please measure your bucket before ordering to ensure a proper match..
  • Heavy-duty Steel Structure: Our backhoe thumb is made of heavy-duty thick steel and designed with a triangle structure. Thus, it has acquired excellent durability and stability. The surface is also powder-coated to resist corrosion..
  • Easy to Assemble and Weld: Each part of the thumb has been plasma cut for tight tolerance, and all necessary fittings are provided to make sure you can assemble and weld the high-quality backhoe thumb without trouble..
  • Bolt-on Design: The simple-and-convenient bolt-on design allows for easy removal when not in use.
  • the three mounting holes with different positions enable you to adjust the angle of the thumb according to your needs..
  • Wide Application: Many people around the world have widely used our backhoe thumb. It is considered a perfect attachment tool for tractors, excavators, and other equipment to help you pick up objects more easily..
Check Stock

PROSHI Compact air needle scaler remove slag rust paint and dirt quickly with this needle scaler

  • Air pneumatic needle slag cleaner deburring tool removing tool rust corrosion slag remove cleaning Tool..
  • 12 hardened 3mm steel needles remove weld slag, rust, paint, and dirt. working trip: 6-7mm, blows per minute: 4000bpm.
  • One-trigger-operation eliminates complicated preparing steps and is easy to use. Meanwhile, a professional touch trigger not only adds comfort but....
  • With its compact size and excellent performance, this lightweight needle rust remover is designed to clean smaller surfaces without messy abrasive....
  • Needle scaler easy adjustment without special tools. What's more, it features an exhaust design that keeps the human body away from dust, and....
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

RIDGID 36273 460-6 Portable TRISTAND Chain Vise for 1/8\-6\ Pipe, Red/Black

  • TRISTAND CHAIN VISE: Built to accommodate all your rugged jobsite needs by clamping work pieces easily and securely with a pipe capacity of 1/8 in. to 6 in..
  • STURDY BUILD: Features a durable tool tray made especially for tough and demanding jobs to offer superior strength and stability.
  • ERGONOMICALLY DESIGNED: Constructed with an optimized base structure that overhangs the front legs for a clear tool swing and maximizes work area for additional space while working around the pipe.
  • PORTABLE AND CONVENIENT: Features integral folding legs and 3 tool hangers for easy portability and set-up and an integrated ground lug for a conductive surface to connect the weld ground.
  • SAVES LABOR: Self-hooking for 4-in. pipe conveniently eliminates the need to use a second hand to engage the chain into the wear plate.
Check Stock

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

  • 【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
  • 【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • 【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
  • 【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
  • 【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..
Check Stock