ReviewsWeld Tubing

LiebeWH TIG Welding Torch Head NR‑17 Rotating Argon Welding Gun Head Gas Valve Torch Head Swivel Neck Soldering Torch Jointing Accessories

  • 【Multiple Angle】The rotating design of this TIG welding torch can be welded at multiple angles to reduce the difficulty of work, giveing greater access to difficult welding positions.
  • 【Easy to Use】This TIG welding torch is light in weight and can be operated with one hand to reduce operator fatigue, easy to connect and replace.
  • 【Exquisite Workmanship】The rotating argon welding gun head is with great workmanship, becoming perfect replacement for the old one, saving operation time.
  • 【Good performance】This rotating argon welding gun head is small in size, easy to carry and store, convenient to use and with good performance.
  • 【Practical】The argon arc welding tool is designed specifically for those tough tubing fabrication applications where it is virtually impossible to weld with a conventional torch.
Check Stock

TentandTable 36-Inch Square Solid Birch Wood Folding Table | 30-Inch Height | Heavy Duty | Aluminum Edge | for Weddings, Parties, and Events | 4 Pack

  • 3' Square Top (36") - Pack of 2 - 3/4" thick clear faced plywood made from birch wood, sanded smooth without voids and patches, sealed on both sides with a protective polyurethane finish. Legs secured to top with flush flat head carriage bolts, lock washers, and nuts..
  • Aluminum edging is high-pressure crimped to the top - no adhesives used. Legs secured to top with flush flat head carriage bolts, lock washers, and nuts..
  • Legs made from 1" diameter, 16-gauge, cold-rolled, silver powder-coated steel tubing. Continuous weld joints. Black plastic glides pressed into ends of legs..
  • Hinged diagonal brace allows legs to fold. Full-length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking..
  • Perfect for weddings, banquets, picnics, restaurants, events, and more!.
Check Stock

J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz.

  • JB WELD: Is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Perfect for household, automotive, marine and craft uses..
  • THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel..
  • EASY TO USE: Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color..
  • VERSATILE & DEPENDABLE: J-B Weld has a tensile strength of 3960 PSI & sets overnight. It can withstand temperatures up to 550ºF when cured. Great for use on brick, concrete, metal, fiberglass & more..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World’s Strongest Bond..
Check Stock

CRC 2-26 Multi-Purpose Precision Lubricant 02005 - [Pack of 12] 11 WT OZ, Multi-Purpose Aerosol Lube for Electronic Equipment

  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment.
  • MULTI-PURPOSE LUBRICANT: This versatile lubricant also works as a penetrant and corrosion inhibitor to help prevent electrical malfunctions caused by water penetration, humidity, condensation, or corrosion..
  • EXCELLENT PERFORMANCE: Featuring a 360-degree spray valve, this lubricant is safe to use on plastics and restores resistance values and helps stop current leakage..
  • APPLICATIONS: Our lubricant can be used on circuit breakers, switchgear, motors, communication assemblies, wire, weld rods, jigs, starters, castings, generators, and tubing. It is also NSF H2 registered for use in food and beverage plants..
  • PRODUCT SPECIFICATIONS: This product is available in a 12 pack of 11 wt oz aerosol cans..
Check Stock

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml 2

  • J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be....
  • VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock

J-B Weld Plastic Bonder Black 25ml Syringe - 2 Pack (50139-2), 25 ml - 2 Pack

  • J-B Weld Plasticbonder (Black): A Quick Setting And Multipurpose Two Part Urethane Adhesive & Gap Filling System That Provides A Strong And Lasting Bond To Many Plastic Surfaces J-B Weld Plasticbonder Is Great For Diy Plastic Repairs, Filling Dents, Bumper Repairs And More. J-B Weld Plasticbonder comes in Syringe allowing for a 1: 1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
  • Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Plasticbonder Takes 15 Minutes To Set And 30 Hours To Cure J-B Weld Plasticbonder Set And Cure Color Is Black..
  • Strength: J-B Weld Plasticbonder Has Tensile Strength Of 3770 PSI..
  • Surface Applications: Thermoset & Carbon Fiber Composites, Thermoplastics And Coated Metals, Plastic & Pvc, Concrete, Ceramic & Tile, Fiberglass, And Aluminum.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, ....
Check Stock

PC Products PC-7 Epoxy Adhesive Paste, Two-Part Heavy Duty, 2oz in Two Jars, Charcoal Gray 27776

  • J-B WELD MINUTEWELD: A stronger and more permanent substitute to Super Glue J-B Weld MinuteWeld is an instant setting two part epoxy that will set in 1 minute under most temperature conditions J-B Weld MinuteWeld comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, MinuteWeld takes 1 minute to set and 1 hour to cure J-B Weld MinuteWeld set and cure color is clear.
  • STRENGTH: J-B Weld MinuteWeld has tensile strength of 2300 PSI.
  • SURFACE APPLICATIONS: Ceramic & Tile, Fiberglass, Plastic & PVC, Wood, Concrete, and Glass.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
Check Stock

Powerbuilt All-in-One Unijack Pinch Weld Saddle Adapter, Protect Vehicle Frame, Car Lift - 240337

  • LIFT MORE: Adds Pinch Weld application to all Unijacks and All-in-One Jacks. Now lift right on the pinch weld point with these jacks without worry of damaging or bending the pinch welds in the frame..
  • EASY: Simply slide the pinch weld adapter onto the existing saddle riser of the All-in-One or Unijacks..
  • UNIVERSAL FIT: The Pinch Weld Adapter fits all Unijacks and All-in-One Jacks on the market. 640912, 620470 & 620471..
  • SAFER: The Pinch Weld adapter not only protects the frame of the vehicle from damage, but also also for more secure contact with the vehicle and will the wide platform straddling both sides of the pinch weld your vehicle will be more stable during lifting..
Check Stock

BHA Interleaf Flap Wheel Abrasive Drum, 4\ x 4\ with 3/4\ Quad Keyway (80 Grit)

  • SPECIFICATIONS - These Aluminum Oxide Shank Mounted Abrasive flap wheels come in a pack of 10. Grit 60, 2-inch in diameter, 1-inch thickness with ¼ inch shank..
  • APPLICATIONS - Designed for use on flat, irregular, and contoured surfaces, as well as hard-to-reach places such as pipes and tubing, Eco Edge's flap wheels are suitable for a variety of applications, including de-burring, finishing, polishing and cleaning on metals. It can be used to remove rust and weld burr, as well as paint removal on wood..
  • DESIGN - Aluminum Oxide Shank Mounted Abrasive Wheels are 003cb003eEngineered & Designed in USA003c/b003e by Eco Edge and Assembled in China. Abrasive Cloth has been handcrafted, for perfection and quality assurance..
  • SHANK - Sturdy Solid Stainless Steel Shank fits all power drills and power tool..
  • SAFETY - Max speed for 1" flap wheels: 30,000RPM |1.5" flap wheels: 25,000RPM | 2" flap wheels:25,000 RPM |3" flap wheels: 20,000RPM. Never exceed maximum recommended RPM speed. Always take safety precautions including, but not limited to, gloves, guards, and facial protection..
Check Stock

Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap

  • Scope of application: Weld On Billet Caps Aluminium Weld on Filler Neck does not need to be replaced frequently, with strong practical and durable. The filled neck with cover is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
  • Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision m....
Check Stock

Secrets of Silicon Valley

  • J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performanc....
Check Stock