ReviewsWeld on Exhaust Systems

CURT 49180 2-Inch x 18-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.

Check Stock

CURT 49060 2-Inch x 6-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.

Check Stock

Remflex 2048 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6/6.0L- LS1, LS2 Vortec, 1-1/2" RP, For Weld Bead Headers, 2/Set.
additional sealing material is provided around the weld bead to provide a better seal.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Check Stock

JWWY Stainless Steel Exhaust Muffler Tail Pipe Trim Cover for 2015-2022 Dodge Charger Exterior Accessories

Package: There are two pieces of 2.5 inches inlet exhaust tips in the package..
Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes..
Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. There is a blue burnt end on the tip. It looks very fashionable and powerful. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look..
Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better..
Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..

Check Stock

Exhaust Tip 3.00' Inlet 4.00' Outlet 16.00' long Dual Slant Angle Stainless Steel WDWD304016-300-SS Wesdon Exhaust Tip

Exhaust Tip 3.00″ Inlet 4.00″ Outlet 16.00″ long Dual Slant.
Double Wall Slant Could be used as Left or Right Side.
Weld On Style fits a 3.00 Exhaust Pipe 3.00 Inlet.
(Please measure to make sure it fits your Car or Truck) fits a 3.00 Exhaust Pipe 3.00 Inlet.

Check Stock

Exhaust Tip 2.50' Inlet 4.00' Outlet 16.00' long Dual Slant Angle Stainless Steel WDWD304016-250-SS Wesdon Exhaust Tip

Exhaust Tip 2.50″ Inlet 4.00″ Outlet 16.00″ long Dual Slant.
Double Wall Slant Could be used as Left or Right Side.
Weld On Style fits a 2.50 Exhaust Pipe 2.50 Inlet.
(Please measure to make sure it fits your Car or Truck) fits a 2.50 Exhaust Pipe 2.50 Inlet.

Check Stock

2PCS Car Exhaust Rubber Muffler Hanger, 2 Holes 11mm (0.43inch), Universal Muffler Bracket Mount, Exhaust High Density Rubber Insulator Muffler Hanger (Black)

Universal Accessory: This rubber exhaust hanger fits most cars that use an easily replaceable hanger system and consists of two holes and a rubber lined insulator bracket. Please be sure to check the size and distance of the hooks before use to ensure the product is suitable for use..
High quality rubber: The exhaust pipe insulator hanger is made of high quality, high density rubber. It is heat resistant and durable for long term use. This is a standard automotive part used to replace exhaust systems..
Depth: 20mm (0.8") Hole diameter. 11mm (0.43"). It is a universal vehicle tool for exhaust systems of cars, trucks, Jeeps and SUVs. Please make sure to measure the size before purchase to avoid improper use..
Installation: First use the exhaust hanger removal tool to remove the muffler hanger from the exhaust system. Then hang the new exhaust hanger on the mounting pegs attached to the chassis. Finally, hang the other end of the exhaust hanger on the exhaust pipe mounting pegs..
What you will get: 2 x rubber exhaust hanger, this rubber exhaust hanger is essential to effectively reduce the sound generated by rocking and hitting the car body, reduce the height and contact surface of the exhaust pipe with th....

Check Stock

Upower 2.5 inch Inlet 4 inch Outlet Exhaust Tip 2.5' to 4' Exhaust Tailpipe Tips 9' Long Black Weld On 1.2mm Thick Stainless Steel 2 1/2 Inlet Rolled End (Pack of 2)

【Upower Exhaust Tip Dimension】2.5 inch inlet diameter.
Overall Length:9 inch(2pcs Exhaust Tip are same).
【Design】Weld On - Exhaust Tip Straight Cut- Rolled End.
【Material】High Quality Exhaust Tip Tailpipe built with Stainless steel with black coating. Durable and Anti-corrosive,never Rusty..
【Wide Application】Universal fits any 2 1/2" Outlet or 2.6" Inlet trucks car exhaust tail pipe..
【1 Year Warranty】No instruction is included. Professional installation is highly recommended..

Check Stock

idain 2.5 inch Inlet Dual Exhaust Tip Stainless Steel Polished Muffler Tail Universal Bolt-On Double Outlet Tail Pipe (Black,Curved)

Durable Material:Design with durable stainless steel,strong corrosion resistance,high temperature resistance,during and waterproof.
Dual Exhaust Tip:With dual exhaust tip, it can increase exhaust pressure and reduce exhaust noise effectively.
Excellent Appearance:Exquisite tail throat with stylish design and bright color, replace the traditional exhaust tip to make your car shiny and cool.
Universal Fit:Wipe application for 63mm/2.5 inch Inlet trucks pickup car exhaust system.
Easy Installation:No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench.

Check Stock

Skull Exhaust Tip, Christmas Halloween Skull Head Bone Exhaust Tips Decoration, Solid Metal Exhaust Tail Pipe Adapter for Universal Fitment on Most Cars Motorcycle (Diameter 2 Inch,1Pack)

REALISTIC LOOK DESIGN: The highly detailed skulls are designed with a realistic appearance. The skull exhaust pipe is installed on your motorcycle which will make your riding look cool and amazing..
REAL USABILITY: The solid metal skull exhaust pipe can be used as an ornament as well as a real use. It can effectively protect your tailpipe from dust, rain and rocks, also prevent it from deformation and damage. And it will not restrict air flow..
EASY TO INSTALL: Our skull exhaust tips can be installed on the car or motorcycle directly without any adapter. There is no need to replace any parts, and no weld is needed. It's super easy to Install..
CREATIVE GIFT: The decorative skull exhaust pipe is a creative and surprise gift for family and friends on Halloween, Thanksgiving Day, birthday, etc..
SUITABLE SIZE: Our exhaust skull is suitable for cars and motorcycles in which the diameter of exhaust pipe is 2 inches.This product is 1 pack, it is recommended that you buy 2 exhaust pipes at a time..

Check Stock

Akrapovic 18 Kawasaki EX400ABS Slip-On Exhaust (Carbon Fiber)

Akrapovic exhausts are the most sought after exhaust systems for their unmatched quality, amazing sound, beautiful style, and unrivaled performance..
The Akrapovic Slip-On line represents the first step in exhaust system tuning..
It is simple to install and replaces a stock muffler..
Change the nature of your bike by adding more power, improved performance, and the unique Akrapovic sound..
Everything packed in stylishly designed Slip-On exhaust systems..

Check Stock