ReviewsWeld on Tip

FlashFix Refill Kit | UV Cured Liquid Plastic Super Adhesive Refill Kit

CREATES A STRONG, FLEXIBLE BOND. FlashFix Liquid Plastic Adhesive uses UV light to create a strong, flexible bond within seconds. It can be sanded, painted and customized. Perfect for worn phone cords, broken household items, arts & crafts, jewelry making, laminating decals and much more. Suitable for indoor and outdoor use. Works on a wide variety of materials..
CURES IN SECONDS. Unlike traditional super glue and epoxy, you remain in control. It will not bond or cure until you activate the adhesive with the UV light. Once activated, the clear UV glue quickly turns into a strong and durable plastic weld. FlashFix Liquid Plastic Adhesive is water resistant, works between -40°F and 300°F, and won’t yellow over time..
QUICK AND EASY REPAIRS. FlashFix Liquid Plastic Adhesive is a good alternative for applications where super glue and other bonding products may fall short. Use it to fill, seal, or weld -- and so much more. This plastic welding and UV glue kit is a useful product to have in any household..
PRECISION TIP RESISTS CLOGGING. FlashFix Liquid Plastic contains no solvents and will not dry out like traditional epoxy or super glue. This gives you much more control and helps avoid waste..

Check Stock

Weld-on 16-Gauge Precision Syringe Applicator for Weld-on 16 Acrylic Solvent Cement - Pack of 3

Stainless Steel 16 gauge Blunt Needle tip.
For use with Weld-on #16 medium bodied acrylic solver cement..

Check Stock

2 Pcs 2.5" Inlet Exhaust Tips, LCGP 2.5" Inlet x 4" Outlet x 17" Overall Length, Weld On, Polished, Universal Stainless Steel Diesel Exhaust Tailpipe

2.5 inch inside diameter inlet, 4 inch outside diameter outlet, 17 inch overall length..
Polished surface treatment, high temperature resistance, not easy to scratch, and the paint is not easy to fall off..
High quality stainless steel infused with anti-corrosive agents that prevent your exhaust tip from rusting..
There is a small hole on bottom of tip to drain water, not easy to accumulate water and prevent rust..

Check Stock

Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap

Scope of application: Weld On Billet Caps Aluminium Weld on Filler Neck does not need to be replaced frequently, with strong practical and durable. The filled neck with cover is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision m....

Check Stock

AWLOLWA Oxygen Acetylene Torch kit Medium Duty Cutting Torch and Welding Kit (Blue)

【Oxy Acetylene Torch Kit】 The welding & cutting torch set are made of high-quality materials, which are durable to be your long-term choice. Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
【Precision Design】The oxy acetylene torch kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
【Easy To Use】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
Move the torch tip slowly along the line of your cut until the metal has fully parted.
【Versatile Use】Oxygen and acetylene fuels can be used in various types of portable welding, rivet cutting, soldering, brazing, surface hardening and metal heating processes.....

Check Stock

BLACKHORSE-RACING Universal Dual Exhaust Tip Straight Cut 2.5' Inlet 3.5 Inch Outlet 10.5' Length Polished Stainless Steel Silver Single Layer Staggered Tailpipe

Dimension: Inlet: 2.5″ (63mm), Outlet: 3.5″ (89mm), Width: 7.25″ (184mm), Total length: 10.5″ (265mm).
Material: Made of Polished Stainless steel, durable and anti-corrosive..
Feature: Duo Outlets – Straight Tip – Weld-On – Single Layer.
Wide Application: Universal fit for Most Vehicles With 2.5″ Diameter Inlet Size Only (Note: Please Refer Dimension To Make Sure It Will Fit Before Purchasing).
Install: Pack of 1 dual exhaust tip. Professional installation is highly recommended, No instruction included.

Check Stock

Exhaust Tip 2.50 Inlet 6.00 Outlet 12.00 Long Slant Chrome Wesdon Exhaust Tip

Exhaust Tip 2.50" Inlet 6.00" Outlet 12.00" Long.
Fits a 2.50 Exhaust Pipe 2.50 inlet 6.00 Inch Outlet.
Polished .001 Bright Nickel Chrome Plated (Please measure to make sure it fits your Truck).

Check Stock

idain 2.5 inch Inlet Dual Exhaust Tip Stainless Steel Polished Muffler Tail Universal Bolt-On Double Outlet Tail Pipe (Black,Curved)

Durable Material:Design with durable stainless steel,strong corrosion resistance,high temperature resistance,during and waterproof.
Dual Exhaust Tip:With dual exhaust tip, it can increase exhaust pressure and reduce exhaust noise effectively.
Excellent Appearance:Exquisite tail throat with stylish design and bright color, replace the traditional exhaust tip to make your car shiny and cool.
Universal Fit:Wipe application for 63mm/2.5 inch Inlet trucks pickup car exhaust system.
Easy Installation:No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench.

Check Stock

SÜA Oxygen and Acetylene Gas Cutting, Welding and Heating Set - Medium Duty Torch - Plastic Box - Model: Wyvern V

This Set includes: Oxygen and Acetylene Regulators, Medium Duty Torch with Model: 3-101-1 Acetylene Cutting Tip Compatible with Victor, 3 x W-1 series Welding Tips, Heating Tip, 15 feet Twin Hose, Single Flint Striker, Oxyfuel Goggles, Tip Cleaner and Spanner..
Can cut up to 6” with additional tips and up to 1” with the provided #1 tip. – Can weld or braze up to 1/2” with additional tips and up to 1/16” with the provided tips..
Acetylene Tank Connector: CGA-510 Fits Big Acetylene and Propane tanks EXCEPT Small Sizes MC and B (check all pictures for reference) - Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
Cutting attachment is compatible with Victor series 3 Acetylene and 3-GPN Propane Cutting Tips and Series 100 Handles. The Torch Handle is Compatible with W-1 Acetylene Welding Tips, MFA-1 Series Acetylene and MFN-1 Series Propane Rosebud Heating Tips..
This heavy-duty oxyfuel cutting and welding set is manufactured using high quality, strong materials. Durable and sturdy it is perfect for amateurs, DIY´s metalworker, or seasoned professionals, for industrial, farm, or home applications. Can be used on various processes such as welding, soldering, brazing, riveting, cutting, hard-facing and metal heating process..

Check Stock

Exhaust Tip 2.50 Inlet 6.00 Outlet 18.00 Long Slant Chrome Wesdon Exhaust Tip

Exhaust Tip 2.50" Inlet 6.00" Outlet 18.00" Long.
Weld Or Clamp On Style 2.50" Inlet ( Clamp not included ).
Fits a 2.50 Exhaust Pipe 2.50 inlet 6.00 Inch Outlet.
Polished Bright Nickel Chrome Plated (Please measure to make sure it fits your Truck).

Check Stock

RX WELD Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Tool Set with Two Hose,Goggles,Regulator Gauges,Storage Case-Portable Cutting Torch Set Welder Tools

【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
Move the torch tip slowly along the line of your cut until the metal has fully parted.
【Complete Accessories】The portable oxy brazing welder features with hoses,welding and cutting torches,goggles,tip....

Check Stock