ReviewsWelded Round Steel Pipe

Big Gun Exhaust 10-1953 Gray One Size Exhaust Pipe EVO R Slip On

High-temp black thermal coated oval shaped aluminum muffler. TIG welded reinforced muffler bracket.
304 stainless steel mid pipe/ head pipe. Black powder coated stainless steel end tip. Much lighter than stock exhaust.
Massive horsepower and torque gains. Sleek muffler design allows for maximum clearance. Vortex Quiet Insert included.
Removable screen-type USFS approved spark arrestor. Handmade in the USA. 1 Year Limited Manufacturers Warranty.
Removable screen-type USFS approved spark arrestor. Handmade in the USA. 1 Year Limited Manufacturers Warranty...

Check Stock

John Boos GT-8 Carbon Steel Grease Interceptor 14.2 Long by 11.2 Tall by 10.5 Wide 8 lbs Grease Capacity

This Grease trap has an 8 pound grease capacity and measures 14.2" Long by 11.2" Tall by 10.5" Wide. It measures 2" from top to pipe opening, 7.5" from pipe opening to base.
Made from TIG welded 11 gauge (1/8 inch thick) carbon steel with a corrosion resistant coating.
Grease Trap features a non skid cover (deck plate) with locking device and removable baffle ensure lid stays securely closed..
T-Vent Pipe (Flow Control Tee) is included. Both ends of the Grease Interceptor accept no-hub adapters for steel or plastic.
This commercial Grease Trap/Grease Interceptor is certified by the Plumbing and Drainage Institute.

Check Stock

Corona Hercules Post Hole Digger PD60000

Buckeye pattern features strong steel pipe handles welded to the square steel shanks and yoke.
Super tough square-cut steel blades are ideal for digging in heavy, rocky soils.
Returns will not be honored on this closeout item.

Check Stock

Seymour DG-16 6-1/2-Inch Post Hole Digger

Buckeye pattern features strong steel pipe handles welded to the square steel shanks and yoke.
Super tough square-cut steel blades are ideal for digging in heavy, rocky soils.
Returns will not be honored on this closeout item.

Check Stock

BestEquip 42-5.5 Safety Bollard, 5-1/2\ OD Safety Barrier Bollard, 42\ Height Yellow Powder Coat Pipe Steel Safety Barrier, with 4 Free Anchor Bolts, for Traffic-Sensitive Area

Welded Steel Construction: This safety bollard is made of Q235 steel features high hardness, great strength, and durability. Tube Thickness: 0.08 in/2 mm. Height: 42 in/106.6 cm. Welded and integral structure enables the bollard post to withstand impact..
Yellow Finish 5.5" O.D: The steel pipe safety bollard is highly visible and grabs attention due to its bright yellow finish and a black stripe on the top. The powder-coated finish guards the parking bollard against oxidation, UV rays, and fading or rusting. Diameter: 5.5 in/14 cm..
Stable Base Plate: Our traffic bollard adopts a sealed bottom design, increasing the grounding area. No need to worry about sand or cement oozing out the bottom. Base Size(L x W): 7.9 x 7.9 in/20 x 20 cm, Base Thickness: 0.2 in/5 mm. More stable and durable, not easy to deform..
Easy Installation: This guardian steel bollard is easy to install with four pre-drilled mounting holes in the base. It comes with four anchor bolts and a wrench. Assembly requires minimal energy and time..
Wide Application: This steel pipe bollard stands vertical to provide increased visibility and protection to entrances, parking lots, sidewalks, bike paths, and more. They are commonly used in traffic-sensitive areas..

Check Stock

BestEquip Safety Bollard 36-4.5 Safety Barrier Bollard 4-1/2\ OD 36\ Height Yellow Powder Coat Pipe Steel Safety Barrier with 4 Free Anchor Bolts for Traffic-Sensitive Area

Welded Steel Construction: This safety bollard is made of Q235 steel features high hardness, great strength, and durability. Tube Thickness: 0.08 in/2 mm. Height: 36 in/91.4cm. Welded and integral structure enables the bollard post to withstand impact..
Yellow Finish 4.5" O.D: The steel pipe safety bollard is highly visible and grabs attention due to its bright yellow finish and a black stripe on the top. The powder-coated finish guards the parking bollard against oxidation, UV rays, and fading or rusting. Diameter: 4.5 in/11.4 cm..
Stable Base Plate: Our traffic bollard adopts a sealed bottom design, increasing the grounding area. No need to worry about sand or cement oozing out the bottom. Base Size(L x W): 7.9 x 7.9 in/20 x 20 cm, Base Thickness: 0.2 in/5 mm. More stable and durable, not easy to deform..
Easy Installation: This guardian steel bollard is easy to install with four pre-drilled mounting holes in the base. It comes with four anchor bolts and a wrench. Assembly requires minimal energy and time..
Wide Application: This steel pipe bollard stands vertical to provide increased visibility and protection to entrances, parking lots, sidewalks, bike paths, and more. They are commonly used in traffic-sensitive areas..

Check Stock

HITBOX 4 in 1 Aluminum MIG Welder 200Amp 110V/220V Smart Control IGBT DC Inverter TIG Welder + MMA Stick Mix Gases Gasless Flux Solid Core Wire Welding Machine

【ALL in ONE】 Smart welder for everyone. HITBOX 4 in 1 Function welder starts welding with a button! Choosing weld mode, material, weld wire,....
【Multi-Material Weldable】HITBOX MIG200P inverter welder could weld aluminum, iron, carbon steel, stainless steel, etc. Applies to pipe....
【MIG/MAG Welder】 1. MIXGAS can use 0.6 / 0.8 /0.9/ 1.0mm flux wire. With 0.6 / 0.8 / 1.0mm wire, it can be welded with a thickness of 0.6-3.4mm.....
【TIG /WIG Welder】 Suitable for 1.6 mm and 2.4 mm tungsten. With 1.6 mm tungsten, it can be welded with a thickness of 1.0 to 4.8mm, and with 2.4....
【MMA /ARC Welder】Current 40-170 amperes. 2.5 / 3.2 / 4.0mm electrodes can be welded. Welding thicknesses from 1.6 to 6.4 mm can be welded using....

Check Stock

Peastorm Glasspack 3 Inch Muffler Exhaust Pipe, Universal Performance Resonator Dual Loud Exhaust Tip 3 Inch Inlet for Trucks Car

Universal performance mufflers 3" OD inlet/outlet 15.5" long 4.3" round body width, as long as your exhaust pipe is 3 inch and have enough space to install, it will be fit..
Utilizes spiral design helps strengthen back pressure at low rpms, and improve exhaust efficiency at high rpm..
The quiet resonator adopts a unique double-layer spiral structure, filled with fiberglass absorbs unwanted interior resonance, get a low, deep tone, both ends can be inlet, no inlet or outlet difference..
Stainless steel construction provides long-lasting durability, withstands high exhaust temperature..
This product needs to be welded or linked with clamps, and professional installation is strongly recommended..

Check Stock

Peastorm Glasspack 2.5 Inch Muffler Exhaust Pipe, Universal Performance Resonator Dual Loud Exhaust Tip 2.5 Inch Inlet for Trucks Car

Universal performance mufflers 2.5" OD inlet/outlet 15.5" long 4" round body width, as long as your exhaust pipe is 2.5 inch and have enough space to install, it will be fit..
Utilizes spiral design helps strengthen back pressure at low rpms, and improve exhaust efficiency at high rpm..
The quiet resonator adopts a unique double-layer spiral structure, filled with fiberglass absorbs unwanted interior resonance, get a low, deep tone, both ends can be inlet, no inlet or outlet difference..
Stainless steel construction provides long-lasting durability, withstands high exhaust temperature..
This product needs to be welded or linked with clamps, and professional installation is strongly recommended..

Check Stock

Stainless 2.5" 90 Degree Mandrel Bend Elbow - 14GA/.078" Wall - 1.5" Leg - SS304 Stainless Steel Exhaust Elbow Piping for Car Exhaust Pipe Modified, Stair Handrail, etc - KOTVTM

【Material】: SS304 Stainless Steel 90° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2.5 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, etc.
【OD】: 2.5"/63mm, The outer diameter of the elbow is 2.5". Height（L): 5.51"/140mm.
【Quantity】: Single Elbow. 100% brand new.

Check Stock

KOTVTM 2" Stainless Steel Elbow 45° Mandrel Bend Elbow - 1.5D/3" CLR Loose Radius - 16GA/.065" Wall - 2" Legs - SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Pipeline engineering, etc

【Material】: SS304 Stainless Steel 45° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, Pipeline engineering, etc.
【Quantity】: Single Elbow. 100% brand new.

Check Stock