ReviewsWelder mig Welding Machine

Welding Basics: An Introduction to Practical & Ornamental Welding

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

Weldpro 155 Amp Inverter MIG/Stick Arc Welder with Dual Voltage 240V/120V welding machine, spool gun capable

  • The New Mig 155 GD is perhaps the most capable and versatile MIG welder in its class. Equipped with features designed to meet even the most demanding welding jobs while not breaking the bank. The 155 GD can perform MIG, flux core and DC stick welding as well as the ability to adapt scratch TIG with the optional TIG torch available through our website..
  • This latest version of our economy minded 155 amp MIG welder now includes the ability to remove the torch cable and replace it with our aluminum spool gun. After inserting the spool gun a simple flick of the switch inside the welders drive roller housing enables spool gun operation..
  • The MIG155GD can run .023, .030, and .035 MIG and flux cord wire. No need to disconnect electrical terminals change polarities. With the Mig 155 GD changing polarity is as simple as swapping the dongle cable from plus to minus dinse connector right on the front of the machine..
  • Packaged with multiple drive rollers, both smooth and knurled for flux core welding, a reel of flux core wire, and a gas regulator for MIG welding, along with a stick welding electrode stinger, the MIG155GD is ready to handle most any DC welding needs..
  • Portable, capable and versatile, still with the ability to run 120V as well as 240V this little ....
Check Stock

ARCCAPTAIN MIG Welder, 200Amp 6 in 1 Gas MIG/Gasless Flux Core MIG/Stick/Lift TIG/Spot welding/Spool Gun 110V/200V Aluminum Multi Process Welding Machine with LED Digital Display, Burn Back Adjustment

  • POWERFUL 6-IN-1 MIG WELDER: The multi-process welding machine that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA, Spot welding, Lift TIG, spool gun connector optional (tig gun and spool gun not included). Suitable for all kinds of welding requirements .023”/.030”/.035” solid wire, .023”/.030”/.035” flux core wire, .035”/.045” aluminum wire..
  • SYNERGIC MIG: Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders. Cooling fan that runs only when it's needed so no constant buzzing sounds..
  • MULTI-FUNCTIONAL WELDER: The MIG welder features some special functions that included adaptive crater, burn-back adjustment and pre-flow/post-flow, which improve your welding efficiency. 2T/4T 2 welding way meets your needs. Store 10 preset settings: can set 10 groups of parameter data for each welding mode, it’s more convenient to start the next welding job..
  • REVOLUTIONARY LARGE LED DISPLAY: Exclusive human-computer Interaction LED screen design, provides you with accurate data display and makes you read easier an....
Check Stock

HITBOX 5 in 1 MIG Welder 200Amp Synergic 110V 220V Multifunction Aluminum Inverter MIG ARC Lift TIG Gas Gasless MIG Spool Gun Compatible Flux Cored Wire Solid Core Welding Machine Equipment Upgraded

  • Multi-Process Welder :The latest version 5 in 1 Welder .Suitable for MMA/ARC, Lift TIG, flux MIG, gas MIG,Gassless Mig and also support spool gun welding .Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate and extending the weld cable to 164FT does not attenuate the current.
  • Synergic Control & Non Noise: Equipped with a smart digital LCD display and the welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
  • [Spool Gun/Aluminum Welding Opinion] HITBOX MIG200II proceeded 2 way to do aluminum welding work . with package include graphite conduit liner you can alleviate any kinks or jams. also you can use Spool gun to do aluminum welding.(Spool gun not include).
  • Safety & Overheat Protection: The arc welding machine has a built-in protection device, and the engine will automatically shut down when overheated and overload.
  • No noise - When the welding machine exceeds a certain temperature, the fan will start.
  • 1 Year Wrannty】Test report issued by ISO 17025 certified Laboratory ,We have enough confidence in our products. If you meet any problem while using, please contact us firstly, you will get efficient....
Check Stock

FORTON MIG/ARC Welder, MIG/Stick 2 in 1 Welder Dual Voltage AC110/220V, Portable Gasless MIG160 IGBT MMA Welder Flux-core Wire Automatic Feed Welding Machine DIY Welder (MIG160)

  • Multi-Process Welder :The latest version 5 in 1 Welder .Suitable for MMA/ARC, Lift TIG, flux MIG, gas MIG,Gassless Mig and also support spool gun welding .Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate and extending the weld cable to 164FT does not attenuate the current.
  • Synergic Control & Non Noise: Equipped with a smart digital LCD display and the welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
  • [Spool Gun/Aluminum Welding Opinion] HITBOX MIG200II proceeded 2 way to do aluminum welding work . with package include graphite conduit liner you can alleviate any kinks or jams. also you can use Spool gun to do aluminum welding.(Spool gun not include).
  • Safety & Overheat Protection: The arc welding machine has a built-in protection device, and the engine will automatically shut down when overheated and overload.
  • No noise - When the welding machine exceeds a certain temperature, the fan will start.
  • 1 Year Wrannty】Test report issued by ISO 17025 certified Laboratory ,We have enough confidence in our products. If you meet any problem while using, please contact us firstly, you will get efficiently and p....
Check Stock

ARCCAPTAIN 130A MIG Welder 110V Flux Core MIG Welder/Lift TIG/Stick 3 in 1 Welding Machine with Synergy IGBT Inverter Portable Gasless Welder Equipment with Welding Gun and 2lb Welding Wire

  • SYNERGIC CONTROL: The recommend current and wire feeding speed will be automatically matched after selected diameter of the welding wire(you can choose 0.8/0.9/1.0 flux core wire). The MIG welder is easier for beginners or those that are learning to weld and want to make small repairs around the house..
  • 3-IN-1 WELDER: 3 welding modes Flux Core Gasless MIG/ Lift TIG/ MMA meet your different requirements (Need to buy extra Lift tig torch). Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of carbon steel, stainless or even thicker steel, Ideal for home DIY, outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs..
  • SAFETY PROTECTION: The welder comes with an attached MIG torch and power cable, you can weld after unpacking the box, it’s convenient to use. Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine..
  • PORTABLE AND COMPACT: The machine weighs only 11.79 pounds, and you can freely carry it anywhere with a handle or shoulder strap. Package includes 1* MIG130 Welder, 1* MIG Torch, 1*Ground Clamp, 1* Electronic Holder, 1* .030"/2lb Flux Cored Wire,1* 0.8/.030" conductive Nozzle,1* 0.9/.035" cond....
Check Stock

ETOSHA 140Amp MIG Welder, Flux Core Welder AC 110V Gasless Welding Machine with IGBT Inverter, Automatic Wire Feed Welders Portable Metal Welder No Gas 110 Voltage 140A Compact Welder with Welding Gun

  • Easy to Use: This welder features an automatic adjustment function, which is no need to match working voltage and feeder speed separately. With thickness adjustment knob to suit your different applications. Even beginners will find it simple to use..
  • High Efficiency: The welding machine uses 0.030/0.035in flux core wire. Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate. Big enough to handle 2.2 pound rolls of wire..
  • Safety Protection: MIG 140A IGBT Inverter welder, reliable and stable. Steel welder machine with electric choke control, less spattering, deep penetration and good formation. Automatic thermal safety protection, overload safety protection keep you safe..
  • Wide Applications: Lightweight 14.77lbs. The ergonomic handle design makes the welder machine very easy to carry. It is very suitable for Home DIY and Repair, Maintenance, Metal Fabrication, farm & road equipment..
  • Package Includes: MIG-140 Welder machine.
Check Stock

ARKSEN MIG-130 Welding Machine Gas Less Flux Core Wire DIY Home Welder Automatic Feeding Yellow

  • Household smart welder: our ARKSEN welding machine is compact and exquisite MIG Gas welder, made of heavy duty stainless steel body, painted with....
  • Flux-cored wire-no Gas welder: our ARKSEN welding machine uses convenient flux-cored wire, self release metal-inert Gas while welding, prevent....
  • Adjustable welding speed: Our ARKSEN welding machine features a wire feeding speed adjust rotary knob. 10 levels of wire feeding speeds for your....
  • Portable design & wide applications: Our ARKSEN welding machine is perfect for welding normal thin steel and iron, perfect for home DIY and general....
  • Many complimentary necessities: The ARKSEN welding machine comes with two air-vent on the machine to help heat dissipation. The welding gun with full....
Check Stock

ETOSHA MIG Welder 160A Portable Welding Machine, Flux Core Wire Gasless Automatic Wire Feeding Welders, 110V AC Wire Feed Welder with Welding Gun, Grounding Clamp, Input Power Adapter Cable and Brush

  • Gasless flux-cored wire welder: This wire feed welder uses a convenient flux core wire that releases metal inert gas while welding to prevent oxidation of the welded parts. No need to carry heavy cylinders!.
  • Powerful: This MIG welder uses 0.030"or 0.035" flux cored wire. The dedicated 110 AC, 60hz power input and 160A output allows you to weld mild steel up to 1/4"plate..
  • Safety Protection: Overheat protection, insulation protection, the machine will stop automatically when overheated. can be widely used in car&farm maintenance, metal processing, high-quality welding and thin material precision welding. It is the best choice for home repairs!.
  • Easy to use: This welder features an automatic adjustment function, 10 wire feed speed and 4 current output.
  • lightweight 39.68lbs, portable and compact design, with a comfortable hand grip that makes it easy to carry wherever you want..
  • Package Includes: MIG-160 Welder machine.
Check Stock

FORTON MIG Welder,Portable Gasless MIG160E IGBT Welder Flux-core Wire Automatic Feed Welding Machine DIY Welder Indoor Welder

  • 【 IGBT Inverter Technology】MIG160E welding machine adopts the most advanced IGBT inverter technology and has an excellent arc stability, which produces perfect welding effects. All projects can be completed effortlessly and quickly. The current, voltage, and wire feeding speed can be adjusted which is very suitable for beginners and professionals alike..
  • 【Portable&Easy to Use】FORTON MIG machine uses 0.8-1.0mm flux-core wire.Up to 160 Amp output that allows you to weld mild steel up to 4mm plate.All metal case, Lightweight 5KG,easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • 【Overload Safety Protection】 FORTON MIG160E welder has a variety of safety protection functions, such as automatic voltage fluctuation compensation, overheat protection, over-current protection, over-load protection, etc. The 60% duty cycle ensures long-term effective welding. The ergonomic lightweight model design makes the machine very easy to be carried, and the fan with automatic temperature control makes the machine run very quietly..
  • 【Packing List】Package Content: 1X FORTON MIG-....
Check Stock

VIVOHOME MIG Welder 130 Flux Core Wire Automatic Feed Welding Machine Portable No Gas 110V DIY Home Welder w/Free Mask Black

  • NO REACTION WELDER – With convenient flux-cored wire to self-release metal inert gas while welding, this welding machine prevents oxidation of the welded part.
  • A great choice for home repairs and hobby projects on light gauge steel.
  • WELDING PROCESS – This welding machine is particularly well-suited for projects of mild steel and stainless steel.
  • It delivers a professional finish for any thin steel welding or auto body work you may need, being powerful and efficient.
  • ADJUSTABLE WELDING SPEED – The VIVOHOME MIG Welder features 4x current flow settings.
  • Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of thin steel, stainless or aluminum sheet metal, or even thicker steel.
  • PORTABLE DESIGN – Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want.
  • It only weighs 34.6 lbs., so you can effortlessly take it as far as you can.
  • ACCESSORIES INCLUDED – The VIVOHOME MIG Welder package includes all the accessories you need to weld like a pro: 1x 6.6′ welding gun with on/off safety control.
Check Stock