ReviewsWelders Helmets

Enhon Silver Streak Welders Pencil with 12PCS Refills, Mechanical Metal Marker Silver Pen with Built-in Sharpener for Welding, Steel, Pipefitters, Fabrication, Woodworking

【Mechanical Welders Pencil】The mechanical metal marking pencil with built-in sharpener and pocket clip for easy carring and usage. You can press to get a proper advance, easier to use than the traditional wooden silver pencil..
【Illuminate Silver Metal Marker】The silver streak round refills can lay out an illuminate sign on metal and oily surface and maintain its performance in high temperature of welding.
Compared with soapstone, the markings of welder pencil is not easily to erase..
【3-Claw Refill Holder】The 3 claw nib design of metal marker can hold the refill tightly and protect refills from breaking, and you can adjust the length of refill very quickly to get a fine point on deep area..
【Wide Application】Welders pencil can be widely applied to make illuminating marks on steel welding, architects designing, sheet metal and steel rob scribing, carving supplies. It is an ideal tool for welders, pipe fitters, building workers and great gift for Fathers' Day..
【Package Includes】1 piece of black welder pencil, 12 pieces of silver 2mm refills. (Warm reminder: please put your finger on the pen tip when you press to get advance refills to avoid all the refills falling out.).

Check Stock

Forney 30681 E7018 AC Welding Rod, 3/32-Inch, 5-Pound

All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
Excellent bead contour, light spatter and slag is often self cleaning.
Good performance with low open circuit-Voltage OCV power sources.
Excellent for tack and skip welds, offers easy re-striking, ideal for out of position welding.
Ideal for shops, farms, hobbyist, and DIY welders.
Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.

Check Stock

Lincoln Electric Co Beanie Fr Welding Large

HIGH QUALITY COTTON – Made from soft, high thread count cotton and features a stylish stars and stripes fabric pattern..
SWEAT ABSORBANT LINER – The inside of the Welders Cap is lined with a soft athletic mesh which absorbs moisture and help prevent hair pulling..
FLAT STITCHED SEAMS – To prevent discomfort from seams from pressing / rubbing against the forehead, the welders cap is flat stitched to improve comfort and increasing durability..
LIGHTWEIGHT & BREATHABLE - The 100% cotton material is breathable by design. This allows consistent airflow to keep you cool for all day use..
ELASTIC FIT – This headwear features an air cushioned elastic band which stretches to fit the users head dimensions..
USED BY PROFESSIONALS – This headwear is used by professional fabricators on a daily basis..

Check Stock

iMeshbean® Complete Replacement Mig Welding Gun for Clarke 180EN and 130EN Mig Welders

This is a great replacement for Clarke 180EN and 130EN 160EN Mig Welders.
This welding gun will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
Length: 10 FT,There is a gas valve in the handle, so this gun can be used with or without gas..
The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..

Check Stock

Eastwood Mig 175 Spool Gun Metal Connector Plastic Plug Push Pull Feeder Aluminum Welding Torch Gun 1 Lb Spool Of .035 Aluminum Wire

Spool Gun With Metal Plug Fits The Eastwood Mig135, Mig175, Mig250, And Mp250I Welders.
Comes Complete With A 1 Lbs Spool Of .035" Inch Aluminum Wire.
For Use On Machines With A Metal Plug On The Machine And Torch Lead..
Designed, Engineered And Tested To Eastwood Specifications.
Fits The Eastwood Mig175, Mig135 And Mig250 Welders.

Check Stock

Lewtemi 4 Pairs Motorcycle Helmet Horns Accessory Cat Ears Stick on Motorcycle Helmet Bike Helmet Devil Wings with Adhesive Suction Cup for Women Men Girls Boys Ski Snowboard Accessories Black

Nice Combination: you will receive 4 pairs of ski helmet accessories in rich designs, including cat ears, large devil horns, small devil horns, and devil wings, and 8 pieces of viscose and 4 pieces of suction cups, sufficient to personalize your own helmets.
DIY Your Helmets: the motorcycle helmet decoration comes with diverse shapes and sizes, vivid and lovely, with solid black color, look cool and stylish, which can make your helmets out of ordinary.
Use with Confidence: the bike helmet ears are made of quality silicone, comfortable and smooth to touch, no discolouring or fading.
The plastic devil horns and wings are sturdy and reliable, not easy to break or deform, can be kept and applied for a long time.
2 Ways to Install: you can stick the black devil horn to your helmets with the equipped adhesive, or use the suction cups to fix firmly, which won't scratch your loved helmets, no other tools required, not easy to fall off after installation, simple and convenient.
Ideal Decorating Supplies: the cat ears for helmet can be widely applied to decorate bicycle helmets, ski helmets, motorcycle helmets, snowboard helmets and so on.
The adorable designs appeal to the tastes of women, men, boys and girls.

Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

iMeshbean® Replacement Mig Welding Gun Stinger Torch Lead for Clarke 130EN 160EN 180EN Welder Parts 10 FT

This is a great replacement for Clarke 180EN and 130EN 160EN Mig Welders.
This welding gun will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
Length: 10 FT,There is a gas valve in the handle, so this gun can be used with or without gas..
The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..

Check Stock

Arrow Welding Magnets Set Arc Tig Mig Welding Magnetic Arrow Holder Multi-angle Metal Working Tools and Equipment Welding Accessories For Soldering Welding Assembly Installation (4PCS-9LBS)

【High Gloss Enamel End Plates】Constructed of high quality stainless steel with a powder coated finish,these welders are anti-rust,corrosion-resistant and long lasting!High gloss enamel end plates are solidly riveted together for the strongest performance and won’t melt while welding!The red coating not only protect from rusting and from scratching the materials that you are working with,but also help you locate it easily,make your welding job more efficiently and precisely!.
【Powerful Welding Magnet】Each package comes with 4 pieces heavy duty powerful angle magnets:can hold and support any ferrous metal objects up to 9 lbs!They provide strong magnetic pull strength for extreme sturdiness that is needed for welding,soldering,can be stuck solidly to any metal object while leaving your hands free to work more efficiently!Perfect gift for square and round tube welders,iron workers,professional welders,metal fabricators,art welders!.
【Most Popular Uses of Angle Degree】Each magnetic welding holder is designed with an arrow shape which allows the magnet to align itself with the tubing in a self-centering fashion,and provides the most popular uses of angle degree:45,90,and 135-degree,allows you to work with different angles while welding,solderin....

Check Stock

TPard Motorcycle Helmet Rack 180° Aluminum Helmet Holder Wall Mount for Bike Motorcycle Helmet Accessories with 2 Hooks Hanger for Coats, Caps, Football Baseball and Rugby Helmet

...e: TPard helmet holder is made of high-quality space aluminum, which makes the base of helmet rack so steady and gives it a smooth horizontally rotation of max. 180° angle you want. Strong load-bearing capacity, stability, durability and not easy to deform..
Protect Your Helmet: Suitable for open-face and full-face helmets. The TPard helmet stand allows you to display your helmet in a different way. It can be wall-mounted on your entryway, your living room, your cellar, your garage or even your helmet collection gallery and will securely support your helmet to keep it in top condition, thanks to its space aluminum sphere..
Easy to Install: First, mark your mounting position.
Second, use an electric drill to drill two mounting holes.
Third, fix the holder bracket tightly with screws.
Finaly, put the caps on the nuts. Four steps done and you get a cool helmet holder ever..
Dual-hook Hanger Design: While sphere part of TPard helmet holder supporting your motorcycle helmet, the hook hanger part plays a role in storing your motorcycle/bike cycling suit, cycling gloves, your coats, your sportswear, or your keys for convenient access..
Gift for Fans' Collection: Perfect gift for motofans/cycling fans/sports fans/movie fans collection of motorcycle helmets, bic....

Check Stock

WeldingCity 5-pk Gas Nozzle 169-715 169715 1/2

Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock