ReviewsWelding 3 way Clamps

HEIHAK 3 Packs 18 Inch Large C Clamp Locking Pliers with Swivel Pads, Heavy Duty Vice Grip Clamp Set, Adjustable Welding Clamps Tools for Woodworking Welding

  • 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
  • Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
  • Straight Jaw Locking Pliers (7in. 10in.).
  • 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
  • 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
  • Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
  • There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.
Check Stock

Fulton 2 Pack of Aluminum Universal Fence Clamps with a ¼ inch to 6¼ inch Clamping Capacity with Steel Threaded 3/8 inch Post

  • The Fulton Aluminum Universal Fence Clamps are the perfect solution for clamping auxiliary fences, stop blocks, setup blocks, corner clamps and more to vertical flat surfaces like fences without the clamps getting in the way. The clamp post arm fits into a 3/8” hole and is at a slight inward angle to keep the lower part of your fence or block up against a flat surface. Fitting into a hole on the top of the fence or block keeps the clamp completely out of the way unlike F-clamps or C-Clamps..
  • The versatility of these clamps allows you to use them in most any way imaginable to make your work flow quicker and easier. With these fully adjustable clamps, you can clamp stock pieces as small as ¼” and stock pieces all the way up to 6¼”. This means that you can attach your sub fences and more to most any table saw, router or even a band saw fence. You can even use these clamps to clamp blocks flat onto your workbench to act like a pseudo bench dog..
  • This pack of clamps includes two Fulton Aluminum Fence Clamps which is perfect for most fence or block applications. Two clamps also work well with 90 degree corner clamp squares with a 3/8” pre drilled hole opening on both sides of the clamping square. Some 90 degree clamping squares are plastic or a com....
Check Stock

MAXPOWER 15-pieces Locking Pliers with C-clamps Set, Long Nose Pliers, Pinch Off Pliers, Sheet Metal Clamp, U Shaped Pliers with Tool Bag for Storage

  • 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
  • Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
  • Straight Jaw Locking Pliers (7in. 10in.).
  • 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
  • 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
  • Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
  • There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.
Check Stock

YESWELDER Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, Suspender Fixture Adjustable Pads Kit(4 Pcs)

  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time.
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply.
  • MAGNETIC HOLDERS▶ Magnets on the pad face only.
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps.
Check Stock

MIG Welder ，MYYWELD Welding Machine 160A 3 in 1 MMA/MIG/LIFT TIG Welder Machine with IGBT Inverter，Flux Core Welder Gas/Gasless Welding Wire Dia 0.8-1.0 mm 2lbs Welding Wire Stick Welder 220V

  • 1.EASY TO USE-This welder is a perfect entry level dual digital display easy to read and set. Besides, the welder machine uses 0.8mm.or 1.0mm flux....
  • 2.BROADLY APPLIED- Our stick welder is a wide range of uses-suitable for basic DIY such as household welding, hanger, covering, guardrail, Repair,....
  • 3.IGBT TECHNOLOGY -Using IGBT inverter technology gives a more stable performance than traditional welder. It has the following advantages--stable....
  • 4. MULTIPLE WELDING-MIG/lift TIG/stick/MMA welding machine,gas/gasless modes all are available. Can be used for welding kinds of metals. Meeting....
  • 5. THE PACKAGE INCLUDS -1 MIG-160Welder Machine, 1 welding holder, 1 ground clamp ,1 welding torch, 2 hose clamps , 2lbs welding wire, 1 transparent....
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

DynoMax 39510 Stainless Steel Exhaust System

  • COMPATIBILITY -- Designed for Jeep Wrangler JK.
  • see product information for compatibility and engine specs.
  • PERFORMANCE UPGRADE -- Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement.
  • COMPLETE SOLUTION -- Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps.
  • EASY TO INSTALL -- Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding.
  • IMPROVED FLOW CAPACITY -- Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power.
Check Stock

Mellcom CT520D Welding Machine 50Amp Plasma Cutter, 200Amp TIG Welder 3 in 1 Multifunctional TIG/MMA/Plasma Cutter, 110/ 220V Dual Voltage 1/2 Inch Clean Cut with LCD Display

  • USE MOS TRANSISTORS: The powerful electric welding machine performs better than IGBT welding at a lower voltage, and performs well in the high-frequency working section, and the frequency can reach more than 300kHZ. MOSFET power device with unique control mode improves the reliability of the welding machine..
  • SUPPORTS 3 WELDING MODES: Perfectly applied to the three electric welding functions of TIG/ MMA/ PLASMA, allow you to weld stainless steel, alloy steel, and carbon steel and other nonferrous metals. Connect the wires to different interfaces (operate according to the product manual) , Each welding mode can work effectively in 110V/220V voltage environment. This multifunctional electric welding machine meets various daily needs..
  • PORTABLE & USABLE TOOL: This welding & cutting equipment is small, compact in structure, and has excellent current output performance. Lightweight 32 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • WHAT YOU GET: We have equipped this electric welding machine with more excellent product accessories-1 x Argon arc welding torch, 1 x PT-31 cutting torch, 1 x 300A welding torch, 1 x 300A grounding clamp, 1 x Oil-water separator, 4 x Hose clamps, 2 x Copper streets, 2 x Nozz....
Check Stock

10 Pack Hold Down Toggle Clamps Woodworking,201B Clamps Hand Tool Toggle Clamp 220Lbs Holding Capacity,Antislip Quick Release Horizontal Toggle Clamp,Heavy Duty Toggle Clamp for Cam Over Clamp-SKYCY

  • Quick Release Clamp:Cam clamp quick release toggle clamps for holdfast woodworking.Cam lever hold down clamp for cnc workholding clamps.Vertical clamp with non-slip oil and stain-resistant red vinyl solid handle is easy for woodworking clamps hand tool..
  • Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
  • Material: Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • Size Spesifics : 5.90 * 3.74 * 1.41 inches. screw: M6 * 45..
  • Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

Eaton 7504W-SP-L 15-Amp, 120-Volt Standard Grade 4-Way Decorator Switch, White

  • Features ultrasonic welding and integrated construction of the strap and body in order to provide superior integrity.
  • Backwire clamps on the side terminals provide for easy installation of #12 and #14 wires.
  • Paddle has been designed for easier movement and quiet operation.
  • Thermoplastic rocker, top and backbody are virtually unbreakable, promising years of durable performance.
  • This is standard grade 4-way decorator switch.
  • Patented built-in wire stripper for No.14 and No.12 wire to speed installation.
  • Tri-combo screws accept slotted, Phillips and robertson-head tools for installation flexibility.
  • Redesigned paddle for easier actuation and quiet operation, long, broad mounting strap virtually eliminates floating installations.
  • Available in white color, measures 1-1/6-Inch length by 1-2/5-width by 3-4/5-Inch height.
Check Stock

85mm C Clamp Tiger Clamp Woodworking Clamp Heavy Duty C-clamp With Wide Jaw Openings，2PCS

  • ...ust-proof, strong and not easy to break； I-beam design provides sure strength, ensure a firm grip while the clamped object not easily deform..
  • 【Wide range of applications】C-type clamps are powerful and versatile, and can fix parts for assembly, fastening, bonding and welding. Widely used in furniture manufacturing, metalworking and home 、automotive applications, this reliable metal C clamps can ensure that everything is in the right place..
  • 【Convenient to Use】Tiger Clamp with adjustable positioning screws, which can be adjusted according to needs, can be easily clamped on any desktop and wooden strips, with strong clamping force and easy to use..
  • 【Worry-Free Warranty】 if you are not satisfied with the Stainless Steel C Clamps or have any other questions, please contact us, we always stand behind our product, your pleasant shopping experience is the purpose of our services.
Check Stock