ReviewsWelding Cable Connector Joint

ABN L5-50R Connector – 50 Amp Twist Lock Inlet Locking Power Cord Connector Locking Power Inlet Plug 50A 125/250V

CONNECT YOUR CABLE: Use your generator, transfer switch, welding equipment, trailer, RV camper power inlet with this ABN Inlet Locking Connector.
KEEP OUT PESTS: Replace your power cord with this twist lock connector so the cord can be removed and stored without leaving an opening that mice or....
SECURELY HOLD CABLE: This connector comes with strain reliefs that mount inside the base of the connector to hold the cable (clamp for the cord).
PERFECT SIZE: Approximate measurement across the face is 2 inches (5.1cm).
Across the back where the cord enters adds 0.25 inch (2.25 inches / 5.7cm....
Remove housing by loosening face screws and slide over cable (If a weather-resistant boot is used, slide this over....

Check Stock

150 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock

150 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock

ESPEEDER 3.0 Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

Universal fitment, Joins 3.0" OD Pipe to 3.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs.....
The lap joint clamps 3.0" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat....
Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without....
No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one....
SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" lap joint band clamp, you can feel free to contact us via....

Check Stock

200 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock

200 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock

4 Pack [Apple MFi Certified] Apple Charging Cables 6ft, iPhone Chargers Lightning Cable 6 Foot, Fast iPhone Charging Cord for iPhone 12/11/11Pro/11Max/ X/XS/XR/XS Max/8/7, ipad(White)

...rry-free warranty, if you have any questions about this iPhone charger, please contact us, we will give you a friendly answer within 12 hours..
【Apple MFi Certified iphone charger Cable】 The original authorized chip is guaranteed to be compatible with your iPhone. Built-in terminal and smart chip. Original 8 Pin connector with a lightning end, the Apple charging cable connector has a lightning end to ensure safe charging for your device and enjoy fast data transmission and synchronization..
【Pre-eminent Compatible Devices】 Apple iPhone 13, iPhone 13 Mini, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 12, iPhone 12 Mini, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone X, iPhone XR, iPhone XS, iPhone XS Max, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone 7 Plus, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone SE 2020, iPhone 5S, iPhone SE, iPhone 5, iPhone 5C, iPad Air, iPad mini, iPad Pro, iPod, Airpods and more..
【Quick Charge iphone cord】 High-quality four-core copper wire improves the charging and data transmission speed of the iphone charger. Our technology can ensure faster charging time, save your time, and serve you better. At the same time make sure your iphone charger cable device is safe. Preve....

Check Stock

Stick Electrode, 1/8 in. dia., 10 lb.

200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..

Check Stock

Welding Machine 28KHz TBVECHI Handheld Ultrasonic Spot Welder Plastic Welding Machine Portable for ABS/PP/PE

【Ultrasonic Spot Welder】28KHz TBVECHI Handheld Ultrasonic Spot Welder Plastic Welding Machine Portable for ABS/PP/PE. Equipped with super folding gray industrial-grade cable cable connecting line with soft folding resistance..
【Description】The machine can use in high frequency electronic system will be converted to high-frequency mechanical vibration, through welding mold to the plastic body, make the plastic joint face sharp friction melt, caused the plastic body joint surface between "plastic flow of material, instantaneous agglutination process..
【Features】Novel portable structure design, quick and convenient operation and movement. Handgrip operation, flexible and practical, simple operation. Automatic tracking system, no manual tuning frequency automatic tracking frequency..
【Useful】Unique appearance design, all-steel shell, all-aluminum heat dissipation, thin film panel, plastic spraying treatment. Time setting, overload alarm, frequency deviation alarm, frequency current display LCD display at a glance. Strong power, up to 700W, can be continuous or pulse work, in particular, suitable for 1-15mm melting point is used..
【Guaranteed】This item will ship from USA, delivery time need about 5-8 days. If there is any questions please ....

Check Stock

Weldpro 155 Amp Inverter MIG/Stick Arc Welder with Dual Voltage 240V/120V welding machine, spool gun capable

... of the switch inside the welders drive roller housing enables spool gun operation..
The MIG155GD can run .023, .030, and .035 MIG and flux cord wire. No need to disconnect electrical terminals change polarities. With the Mig 155 GD changing polarity is as simple as swapping the dongle cable from plus to minus dinse connector right on the front of the machine..
Packaged with multiple drive rollers, both smooth and knurled for flux core welding, a reel of flux core wire, and a gas regulator for MIG welding, along with a stick welding electrode stinger, the MIG155GD is ready to handle most any DC welding needs..
Portable, capable and versatile, still with the ability to run 120V as well as 240V this little powerhouse is tough to beat. PDF product manual is also available on the Weldpro website. 3 Year Warranty.

Check Stock

[2 Pack] Micro USB Cable 6.6FT AINOPE Micro USB Charging Cable Right Angle Durable Nylon Braided USB to Micro USB Cable Compatible with Samsung Galaxy S6,J7 Edge Note 5,fire Tablet,Kindle

【Longest SR&Military Grade material】 AINOPE Micro usb cable is added with strong military fiber, which is the most flexible, strongest and most....
【Officially Certified Nickel-plated Connector】 This Micro usb cable adopts welding technology and is reinforced with double glue. The connector....
【High Speed Charging and Transfer】 This usb to micro usb cable charges super fast with a maximum output current of 2.4A. Besides, this USB Android....
【Ergonomic 90°Design】The micro usb cable adopts an innovative 90 ° "L" shape design, which can effectively avoid the bending of the cable end....
【Universal Compatibility】This micro usb charging cable is compatible with all devices with a micro USB connector, including Samsung Galaxy S7/S7....

Check Stock