ReviewsWelding Cable End Connector

3 Pin Waterproof Connector, Male Female Plug Socket Industrial Power Circular Connector, Aviation Cable Connector for Industrial, Power and Other Indoor/Outdoor Electrical Wire Connections(2 PCS)

3 Pin Connector Specifications: The working voltage of the power connector can reach 500VAC, and the rated current is 20A. General wire diameter: Φ9.0mm～Φ12.0mm.Cable specification: 2.5 --4.0mm²/14-12 AWG. Contact resistance 003c1.0mΩ. Mounting dimensions: 20mm. Waterproof Protection level: IP67. Package list: 2 male plug + 2 female socket..
High-Quality Material: Our 3 pin connector uses a PBT material shell that imports from abroad with stability, compression, anti-explosion, and anti-deformation. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise..
Easy to Install Plastic Connector: Cable connection type: Soldering. Adopt a bayonet-type fast locking connection, which is convenient, fast, safe, and stable. The precise structure positioning system ensures the safety and stability of the connection performance. The wiring welding temperature requirement is 380℃±40℃, operation time is: each point does not exceed 3 seconds..
Perfect Waterproof Wire Connectors: The waterproof connector design uses the multilayer waterproof and sealing system, from the plug, socket the two ends of the sealed waterproof ring, to the end of the clip line waterproof ring....

Check Stock

WeldingCity 3-pk Dinse-Type Twist-Lock Insulated Connector Pair (Male/Female) for Welding Cable AWG #2-1/0 (35-50mm) | Pack of 3 Pairs

4 pairs of premium Dinse-type cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
Male connector is with Dinse-type pin of .355" diameter (25-mm small) and pi of 1/2" diameter (35-50mm, 50-70mm and 70-95mm)..
Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps. 3-pair per package..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
50-series (35-50mm, #2-1/0, P/N 129527/129526).
70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

RIVERWELD TIG Welding Cable Panel Connector-plug and Socket Dinse Dinze Quick Fitting 315Amp (2, DKJ35-50)

Cable Panel Connector /Euro Style Cable Connector-plug Fit all TIG Welding and Plasma Cutter Machine.
1pcs DKJ35-50 Connector with Black Color..

Check Stock

Rocstor USB 3.0 to 2.5 Sata Adapter

Connector on second end: 1 x USB Type a Male USB.

Check Stock

ABN L5-50R Connector – 50 Amp Twist Lock Inlet Locking Power Cord Connector Locking Power Inlet Plug 50A 125/250V

CONNECT YOUR CABLE: Use your generator, transfer switch, welding equipment, trailer, RV camper power inlet with this ABN Inlet Locking Connector.
KEEP OUT PESTS: Replace your power cord with this twist lock connector so the cord can be removed and stored without leaving an opening that mice or....
SECURELY HOLD CABLE: This connector comes with strain reliefs that mount inside the base of the connector to hold the cable (clamp for the cord).
PERFECT SIZE: Approximate measurement across the face is 2 inches (5.1cm).
Across the back where the cord enters adds 0.25 inch (2.25 inches / 5.7cm....
Remove housing by loosening face screws and slide over cable (If a weather-resistant boot is used, slide this over....

Check Stock

150 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock

150 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock

LOGITECH VC 952-000047 Rally Mic Pod Extnsn Cable 10M

Connector on First End: 1 x Male Microphone.
Connector on Second End: 1 x Female Microphone.

Check Stock

2-Pack LISEN iPhone Charger Cable 6ft, Apple MFi Certified Lightning Cable, Nylon Braided USB Fast Charging Cord Compatible with iPhone X/Xs Max/XR / 8/8 Plus / 7/7 Plus iPad, Grey

...000+ times bending tests for extra protection and durability. The solid and durable two-shade braided armor nylon shield gives the cable stronger protection and flexible performance than others and no need to worry about tangling, effectively prolong the service life..
✅ 6X STRONGER TERMINAL: Upgraded 3D aluminum connector and exclusive laser welding technology, which to ensure the metal part won’t break and also have a tighter connection which fits well even with a protective case on and will never loose connection. Charging and sync two-in-one with one lightning iPhone charger cable, multiple shields promise more stable charging current and no signal interference with data transmission..
✅ 2.4A FAST CHARGING & SYNC SPEED: Built with Apple original chip, this iPhone charger cable lightning cable supports fast charging (up to 2.4A current) while preventing overheating and overcharging, ensure that you and your devices are safe. Original 8 Pin connector with a lightning end, you can enjoy lightning-fast data transfer, syncing..
✅ APPLE MFI CERTIFIED: Certified by Apple, built with original terminal and original chip promise no warning message pops up, ensures that your apple devices are loaded and charge safely at maximum speed..

Check Stock

Rocstor 3FT Mini HDMI to HDMI Cable-M/M

Connector on First End: HDMI (Type A) Male Digital Audio/Video.
Connector on Second End: HDMI (Mini Type C) Male Digital Audio/Video.

Check Stock