ReviewsWelding Cable Stud Connector

150 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock

150 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock

200 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock

200 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock

Stick Electrode, 1/8 in. dia., 10 lb.

200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..

Check Stock

uxcell 20 Pcs 6.3mm Female Cable Crimp Terminal Connector

Product Name: Female Spade Terminal Connector.
Package Content: 20 Pcs x Female Spade Terminal Connector.
Dimension: 19 x 7.7 x 5mm / 0.73" x 0.3" x 0.2"(L*W*H).

Check Stock

Weldpro 155 Amp Inverter MIG/Stick Arc Welder with Dual Voltage 240V/120V welding machine, spool gun capable

... of the switch inside the welders drive roller housing enables spool gun operation..
The MIG155GD can run .023, .030, and .035 MIG and flux cord wire. No need to disconnect electrical terminals change polarities. With the Mig 155 GD changing polarity is as simple as swapping the dongle cable from plus to minus dinse connector right on the front of the machine..
Packaged with multiple drive rollers, both smooth and knurled for flux core welding, a reel of flux core wire, and a gas regulator for MIG welding, along with a stick welding electrode stinger, the MIG155GD is ready to handle most any DC welding needs..
Portable, capable and versatile, still with the ability to run 120V as well as 240V this little powerhouse is tough to beat. PDF product manual is also available on the Weldpro website. 3 Year Warranty.

Check Stock

[2 Pack] Micro USB Cable 6.6FT AINOPE Micro USB Charging Cable Right Angle Durable Nylon Braided USB to Micro USB Cable Compatible with Samsung Galaxy S6,J7 Edge Note 5,fire Tablet,Kindle

【Longest SR&Military Grade material】 AINOPE Micro usb cable is added with strong military fiber, which is the most flexible, strongest and most....
【Officially Certified Nickel-plated Connector】 This Micro usb cable adopts welding technology and is reinforced with double glue. The connector....
【High Speed Charging and Transfer】 This usb to micro usb cable charges super fast with a maximum output current of 2.4A. Besides, this USB Android....
【Ergonomic 90°Design】The micro usb cable adopts an innovative 90 ° "L" shape design, which can effectively avoid the bending of the cable end....
【Universal Compatibility】This micro usb charging cable is compatible with all devices with a micro USB connector, including Samsung Galaxy S7/S7....

Check Stock

[Gulfcoast Robotics] HEX EPCOS Thermistor Upgrade for Creality Ender 3 Ender 5 CR10 3D Printers 1 Meter Extension Cable

EPCOS Thermistors are the ideal choice for the official Creality firmware. Provides more accurate temperature readings than traditional 100K NTC3950....
Creality 1M extension cable includes a 2-pin JST-XH connector that mates perfectly with the board..
Fiberglass insulated leads and brass hex stud provide safe usage at high temperatures up to 300° Celsius..
M3x0.5 HEX stud threads in to the heater block for quick, secure installation..
Silicone insulation ring shields the brass stud from external airflow (e.g. ceiling fans) for stable temperature readings..

Check Stock

RX WELD Welding Cable Quick Connector Pair DINSE-Style (200Amp-300Amp (#4-#1) 35-50 SQ-MM 2-set)

Welding cable quick connector male-female pair with accessories..
DINSE style connection. For AWG wires #4-#1 (35-50 sq mm) with 200Amp-300Amp current rating..
You get Two (2) quick cable connector pairs 200Amp-300Amp with accessories at this price..
Amazon satisfied customer service & fast ship.Please provide a deliverable address..

Check Stock

PLAYOCCAR Vehicle Panel Spot Puller Dent Spotter 110V 3500A Spot Dent Puller Welder 3KW Car Body Stud Welding Machine Multispot Bonnet Door Repair Tool Kit

【SPOT DENT PULLER WELDER】Special designed to repair the dents for the auto body, suitable for sheet metal fire, meson, straight pull, spot....
【ANTI-DAMAGE】The stud welder kit makes small welding spot so that it won't damage the anti-corrosive paint on the another side of the panel.....
【FAST HEAT DISSIPATION】Excellent cooling system which can ensure the machine not so easy to burn although working for a long time. Fast heat....
【WORK EFFICIENTLY】With welding gun, the machine can be capable of two different functions, this means that the time and energy to switch the....
【KIT DETAILS】Include 1 * host, 1 * hook hammer, 1 * carbon rod connector, 1 * triangle chuck, 1 * manual sucker, 2 * carbon rods, 10 * triangle....

Check Stock