ReviewsWelding Cable Twist Lock Connector

EBOOT 20 AWG JST Plug Connector 2 Pin Male Female Plug Connector Cable Wire for LED Lamp Strip RC Toys Battery, 10 Pairs

Total cable length: approx. 210 mm/ 8.3 inch.
2 Pin JST connector, one side for plug the other side for welding.
Package including: 10 pairs JST plug connector with cable wire (10 pieces female, 10 pieces male).
This JST plug connector is suitable for most mini RC helicopter, LED strip light and good for connecting motor, ESC battery.

Perfect for replacing worn out plugs for headphones or making a cable to a desired length or replacing a broken connector..
Easy to handle,you really don't have to be a professional to do this. Just insert the cables in the holes, twist and lock in place, and only then solder..
Suitable for the cable up to 5mm, if your cable is too thin, just use some sleeve to hold it properly to avoid the movement.
Wiring diagram: This connector has 3 solder pins,short silver pin --Tips( Left Audio).
This listing comes with 10-Pack connectors with some shrinkle tube. it saves you much and makes you always have enough backup.Additional shrinkle tube make it a plus for you.

4 pairs of premium Dinse-type cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
Male connector is with Dinse-type pin of .355" diameter (25-mm small) and pi of 1/2" diameter (35-50mm, 50-70mm and 70-95mm)..
Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps. 3-pair per package..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
50-series (35-50mm, #2-1/0, P/N 129527/129526).
70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Cable Panel Connector /Euro Style Cable Connector-plug Fit all TIG Welding and Plasma Cutter Machine.
1pcs DKJ35-50 Connector with Black Color..

【Application】: This 50amp twist lock with boot is designed to protect your cord connector, ensuring safe connection for RV, trailer other outdoor applications..
【Durable】: This 50 AMP RV power cord is made of heavy-duty material with strong corrosion resistance, waterproof and weatherproof..
【Ensurance】: Come with UL and CSA Certified. This 50amp locking shore connector is safely used with 50A 125/250V 4-wire cable..
【Convenience】: The 50 Amp Connector is easy to use with colored-coded wire installation. W: white wire G: green wire X: red wire Y: black wire..
【Widely Usage】Includeing weather-proof boot with locking ring. this connector replacement is perfect for RV, trailer, camper, marine, and boat..

The gun is 10 ft long, and will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
There is a gas valve in the handle, so this gun can be used with or without gas..
The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
You can see the gas hose, trigger connector, and the welding current cable in the second picture..
This gun uses the same Clarke contact tips, gas nozzles, and gas diffusers..

INDUSTRIAL GRADE: NEMA L5-30R & L5-30P, 2 Pole, 3 Wire, Locking Plug Connector SET Black/Yellow.
CLEAR SEE-THRU Wiring Block & Color Coded Positive Crimp Lock Wire Clamps Provides Visual Inspection.
30 Amp - 3750 Watts 125 Volts AC - Grounding Type Twist Locking.
HEAVY DUTY Use for Generators, Transfer Switches, Welding Equipment, RV, Trailer & Camper.

1- Earphones that won't fall out - Guaranteed: Patented Twist Lock technology and Secure-Fit ear cradling system..
2- Ultra-soft earphones designed to match the contours of the ear.
3- Premium sound quality with neodymium drivers and gold-plated connector.
4- Developed by athletes for athletes: Sweat-Proof and Water Resistant Earbuds.
5- Rich sound quality: Patented Twist Lock acoustics and gold plated connector.

This cable compatible with speakon NL4FC Port uses NL4FC female connectors to connect from an amplifier to a speaker with an NL4FC Speakon port.
High current 2-pole speaker wire cable with a locking NL4FC connector securely plugs into a speaker with a 4 pin Speakon style port.
Pro grade performance with 12 AWG oxygen-free copper (OFC) conductors to deliver pristine sound.
2 wire cable is wired +1 , -1 to support common....
Braided cable jacket on this NL4FC style 2 conductor cable provides a distinctive look in your studio.
Flexible and lightweight cable jacket is easy....
Robust construction includes sturdy connectors with easy grip treads, female twist-lock plugs, Heavy duty metal latches and a flexible braided cable....

This cable compatible with speakon NL4FC Port uses NL4FC female connectors to connect from an amplifier to a speaker with an NL4FC Speakon port.
High current 2-pole speaker wire cable with a locking NL4FC connector securely plugs into a speaker with a 4 pin Speakon style port.
Pro grade performance with 12 AWG oxygen-free copper (OFC) conductors to deliver pristine sound.
2 wire cable is wired +1 , -1 to support common....
Braided cable jacket on this NL4FC style 2 conductor cable provides a distinctive look in your studio.
Flexible and lightweight cable jacket is easy....
Robust construction includes sturdy connectors with easy grip treads, female twist-lock plugs, Heavy duty metal latches and a flexible braided cable....