ReviewsWelding Connector Kit

420pcs Non-Insulated Ring Terminals & Fork Connector Kit 22-16/16-14/12-10 Gauge Wire Lugs Battery Cable Terminals Wire Crimp Connectors High Temperature T2 Pure Non-Insulated Copper Connector

  • Ring Terminal & Fork Connector Kit Material: T2(99.9% Purity) Copper.As a wire crimp connector, it has strong conductivity and is not easy to corrode.
  • ELECALL selects 18 types of wire connector. Group by ring and fork with three suitable wire type. Model OTA-B: "A" means the wire square(mm²) that this ring terminal or fork connector can hold, "B" means the inner diameter of the ring or fork for screw..
  • Non insulated ring terminals high quality gurantee: producted under UL standard；High corrosion resistance；silver welding wire thickness: Comply with international standard,High temperature battery terminal connectors resistant heavy ring connector.Copper content ≥ 99%, conductivity ≥ 96%, high conductivity, ductility and corrosion resistance,It's a good helper for wire connection.
  • Fork Connector(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Fork Connector (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Fork Connector (AWG12-10)-0.2" -15pcs (AWG12-10)-0.25" ----- 15pcs.
  • Ring terminal(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Ring terminal (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Ring terminal....
Check Stock

4 Pin RGB Male and Female Connector Wire Cable(10 Pack) with 10 x Male 4 Pin Plugs for 5050 3528 RGB LED Light Strip

  • 1.【Easy Installation】Easy to install no tool installation, no welding connection, 5050 4-pin RGB LED strip connector kit, plug and play.
  • 2.【Flexible】LED Strip Jumper Connector are fully bendable and are perfect for extending a run of LED light strip across a gap, around an obstacle, or for making a bend and the other side contacts are open to stick in..
  • 3.【Use Safety】 The pure copper wires inside are tin-plated, ensuring perfect electric conductivity and longer lifespan,and the conductor is made of tinned copper and PVC insulation sleeve, the insulation layer is soft and flexible..
  • 4.【Attention】When operate this connector,it need to be worked into all contacts touching at the right point and then lock them in, these connectors have little dimples to help lock in strip placement, it needed to be so exact in the placement of the strip..
  • 5.【What you get】10 pack 4 Pin RGB Male and Female Connector Wire Cable with 10 x Male 4 Pin Plugs,when you received the item with any problem,please contact with us for after-sale service..
Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Miller Electric Gas Welding Outfit,Propane,CC509P,WH100 (MB54A-510LP)

  • This gas welding cutting torch kit is good tool for metalworker doing cutting, welding, heating work..
  • This oxygen & acetylene cutting torch kit are mainly made of heavy duty metal and brass, with high strength, durability features..
  • The cutting torch and handle is constructed with high strength alloy,heavy duty stainless steel and durable brass..
  • The cutting torch and welding kit is great tools for many occasions, such as welding,soldering,brazing,rivet cutting,hard-facing and metal heating process..
  • You will get Cutting Nozzle & Attachment, Cutting Torch, Torch Handle, Tip Cleaner, Spark Lighter, Welding Goggles, Spanner, Copper Joint and English Manual in one storage box..
Check Stock

Lenco 05335 International Dinse Type Machine Plug Adapter, Male and Female Connection

  • Welding cable quick connector male-female pair with accessories..
  • DINSE style connection. For AWG wires #6-#4 (16-25 sq mm) with 100Amp-200Amp current rating..
  • You get Two (2) quick cable connector pairs 100Amp-200Amp with accessories at this price..
  • Amazon satisfied customer service & fast ship.Please provide a deliverable address..
  • We are manufactory of welding accessories, if you need a large number of accessories. Please contact us!.
Check Stock

ARC Welder Hand Held Welding Machine Kit 110V Voltage IGBT Digital MMA Welder with Welding Gloves,Folding Welding Helmet,Welding Brush,Welding Ground wire,Welding Rod

  • 1.ARC Welder Hand Held Welding Machine Kit includes 1 ARC Welder ,1 Welding Gloves,1 Folding Welding Helmet,1 Welding Brush,1 Welding Ground wire,5 Welding Rod,Welding Toolbox..
  • 2.The MMA welder is suitable for welding stainless steel, mild steel, aluminum and other metal materials..
  • 3.The portable welding machine is very small and can be carried anywhere to work. It is easy to carry and operate..
  • 4.Hand held welding machine kit built in intelligent chip,high-speed mute ,rapid heatdissipation effect is good..
  • 5.Order with confidence. If you are not satisfied with our products, please contact us and we will reply to you within 24 hours..
Check Stock

RX WELD Air Acetylene Torch Kit Fuel Gas kit Professional Series

  • 【High Quality Construction】 This cutting torch is constructed with high-quality alloy, stainless steel and durable brass for long-term use durability. The universal torch handle match perfectly with external thread type welding tips and is ergonomically designed for better grip and operation..
  • 【Excellent Performance】 The oxygen & acetylene welding cutting torch kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. The operator can change the flame length according to his exact requirements by adjusting the oxygen and gas valves on the torch body..
  • 【Safe & Easy to Operate】 The acetylene torch kit control adjustments are easy to operate, making your welding job so much easier. The Oxygen & Acetylene regulator includes 2.5" diameter gauges to display accurate pressure, so you can easily adjust your gas flow rate with the built -in flow meter. The built-in check valves eliminate the reverse flow of gases, increasing safety..
  • 【Multiple Applications】 The torch kit is easy to handle and can be used in a wide range of fields. This welding torch tool set is a great choice for both an amateur metalworker or a professional. It's perfect for a multitude of applications such as farm, ranch, hobby metal store, constru....
Check Stock

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • GET THE JOB DONE: The ABN 25 Foot Acetylene / Oxygen Torch Hose Twin Pack is designed to transport oxygen and acetylene gases to your welding torch or cutting equipment for your metalworking projects.
  • Twin oxygen and acetylene torch hoses are flame retardant and suitable for indoor and outdoor use in your home, mechanics shop, or on any job site.
  • PERFECT SIZE FOR YOUR NEEDS: 25 foot torch hose length (7.6m) allows you to safely keep the tanks away from the torch tip while servicing your vehicle.
  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed ....
Check Stock

Good Sealing Compression Ferrule Connector Tee Effective Sealing Tee Equal Diameter 316 for Natural Gas for Complicated Pipeline for Solar Energy(Ф6)

  • DN15 Double ferrule bulkhead connector thread specification is ф1/2 ,external thread size is 20.3mm/0.8in,internal thread size is 19.5mm / 0.8in and the error is 19.5mm/0.8in..
  • Double ferrule bulkhead connector adopts double ferrule type installation,reusable,simple and convenient operation, and can be removed freely.No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding..
  • DN15 Double ferrule bulkhead connector has strong connection, high pressure resistance, tightness and repeatable installation, the installation and maintenance are simple and convenient, and the work is safe and reliable..
  • DN15 Double ferrule bulkhead connector selected high‑quality stainless steel 316 materials,the surface of the connector is finely ground by a special process, slick and delicate, the interior is clean and bright, and the tolerance control is accurate..
  • The manufacturing and production of the products follow strict product quality control standards, the product performance is stable, and the quality is reliable. You can use it for a long time with confidence..
Check Stock

DN15 Removed Freely Stainless Steel Double Ferrule Bulkhead Connector 20.3mm/0.8in External Thread 19.5mm/0.8in Internal Thread(Ф1/2)

  • DN15 Double ferrule bulkhead connector thread specification is ф1/2 ,external thread size is 20.3mm/0.8in,internal thread size is 19.5mm / 0.8in and the error is 19.5mm/0.8in..
  • Double ferrule bulkhead connector adopts double ferrule type installation,reusable,simple and convenient operation, and can be removed freely.No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding..
  • DN15 Double ferrule bulkhead connector has strong connection, high pressure resistance, tightness and repeatable installation, the installation and maintenance are simple and convenient, and the work is safe and reliable..
  • DN15 Double ferrule bulkhead connector selected high‑quality stainless steel 316 materials,the surface of the connector is finely ground by a special process, slick and delicate, the interior is clean and bright, and the tolerance control is accurate..
  • The manufacturing and production of the products follow strict product quality control standards, the product performance is stable, and the quality is reliable. You can use it for a long time with confidence..
Check Stock

Titan Attachments Auger Bit Repair Hub 2' Female Hex 5/8' and 3/4' Pin Holes

  • REPAIR YOUR HUB: A failed hub usually breaks along the straight line due to excessive stress or poor construction. Our repair hub helps reduce the stress that occurs during drilling, making for a much stronger drive overall. Use it to fix your worn or broken hex hub connections for your auger or extension..
  • FEMALE CONNECTOR: This repair hub set is designed to receive any 2inch hex drive shaft. It is compatible with either 5/8" or 3/4" pin holes. This repair hub makes up the female component, so it will connect to male pieces of hardware. It can make a useful and helpful tool in your toolbox. Add it to your tool kit supplies and accessories today!.
  • STRONG STURDY CONSTRUCTION: At Titan, we dont mess around when it comes to making highquality products, and this repair hub is no exception. Using expert craftsmanship and superior materials, this repair hub offers the best quality possible. Its made from cast alloy, making it a strong and durable piece of hardware..
  • EASY INSTALLATION: Our repair hub is designed for welding onto 2inch industrial tubing. With its multihole design, installing the repair hub is a piece of cake. Simply pull out your welding supplies and get to work. In no time, youll have an upgraded auger bit that will last you for years to come.....
Check Stock