ReviewsWelding Electrodes

WeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 3/32\ x 7\ | 10-pk

  • 10-pk premium TIG welding Tungsten electrodes tri-element non-radioactive. Electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • AWS Classification: EWG (Purple). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed..
  • Mixed tri-oxides of Lanthanum, Zirconium and Yttrium with total rare earth composition around 1.5% - 1.8%.
  • Tungsten remains. Non-radioactive Tungsten electrodes.
  • excellent substitute for Thoriated Tungsten electrodes. Wide current range and low burn-off rate. Easy arc starts and good stability..
  • Package available: 10-pcs/box for each size of 0.040.
Check Stock

Oumefar Welding Electrode Clamp, 400 Amp Twist Type Holder Welding Electrode Rod Holder Welding Electrode Twist Type Full Copper (Black)

  • USED FOR ---- The welding Twist Type Full Copper holder adopts advanced technology and exquisite craftsmanship, and welding electrode clamp is not hot for long-term welding. Welding electrode clamp is used as a welding electrode holder for various rod electrodes..
  • WELDING ELECTRODE CLAMP ---- Type Holder Welding Tool have 1 x electrode holder, 1 x hex wrench, 1 x spacer and 1 x spacer post in the package. You can choose from black and yellow to meet your needs..
  • SERVICE ---- We launch products that meet your needs, and you will get our 100% problem-free guarantee. Customer's smile is our first goal,if you have any question,please feel free to contact us and we offer 24 hours friendly customer service..
Check Stock

E6011 3/32\ 1/8\ 5/32\ Stick electrodes welding rod 10 lb 50 lb (3/32\ 10 lb)

  • E6011 3/32" 1/8" Stick electrodes welding rod 10 lb 50 lb.
Check Stock

E6013 3/32\ 5/32\ 1/8\ Stick electrodes welding rod 10 lb 50 lb … (1/8\ 10 lb)

  • E6013 3/32" 5/32" 1/8" Stick electrodes welding rod 10 lb 50 lb.
Check Stock

TIG Welding Tungsten Electrode 2% Thoriated 3/32\ x 7\ (Red, EWTh-2) 10-pk YESWELDER

  • 10-pk premium quality TIG welding Tungsten electrodes 2.0% Thoriated ( EWTh-2, Red).
  • AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance.
  • Vacuum packing, no oxidation,long time preservation.
Check Stock

5pcs 0.1mm x 200mm x 250mm 99.5% Graphite Flexible Foil Gasket Sheet

  • Use for metallurgy, machinery, electronics, chemicals, light industry, aerospace and refractory..
  • High-purity graphite has small resistance coefficient, high temperature, corrosion, oxidation resistance, thermal shock resistance, electrical conductivity, thermal expansion coefficient is small, self-lubricating, easy precision machining etc..
  • Graphite electrodes, carbon rod for spot welding machine, carbon rod machine, butt welding machine..
  • For graphite crucible, smelting furnace, electrical appliances' gold silver point and copper pieces and other metal parts welding effect, ideal tools material..
Check Stock

LONGEVITY Tigweld 200sx - 200 Amp AC DC Tig/Stick Welder with Digital Display 110v 200v

  • The unit features high frequency start tig and includes a foot pedal for great tig welding control and operation.
  • The stick welder operates on 110v and 220v volts and is capable of welding 7018, 6013, and other stick welding electrodes.
  • With the flip of a swtich, you are able to weld aluminum in AC mode. Features pre-flow, post flow, and clearance effect (balance) function for greater welding control.
  • Great machine for the hobbyist or professional with an easy to use panel. Excellent heat control.
  • Extemely portable weighing 37 lbs and easily carried to any job on site or offsite. The 110v adapter makes it easy to connect to a standard usa outlet..
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • ... long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all problems for you. Looking forward to your suggestions for welding rods, we will continue to improve our product....
Check Stock

HITBOX HF 2 in 1 TIG ARC Welder 200Amp 110V/220V Dual Voltage TIG/ARC Welding Machine Inverter IGBT Stick MMA Welder Model HBT2000

  • 【Dual Voltage TIG / ARC Welder】 110V/220V 2 in 1 HITBOX welding machine, used as TIG welder or ARC MMA stick welder.The inverter frequency is up....
  • 【IGBT Inverter】This Tig welder also uses an advanced compact IGBT inverter, designed with automatic overheat and over current welding....
  • 【2T & 4T Functions】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is....
  • 【Powerful Welding Application】TIG welding thickness 0.3-5.0mm, application of Tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for....
  • 【Buy With Confidence】HITBOX offers good after-sales service. If the machine can not work or have other problem when working, please contact us at....
Check Stock

200A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Red

  • GREAT FOR most Arc, MMA, Hand Stick welding jobs.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with..
  • MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections..
Check Stock

HZXVOGEN 110V 220V 250A Aluminum MIG Welder IGBT Lift Tig Gas Gasless Stick Arc MMA Welding Machine No Gas Self- shielded Home Use Factory Machine MIG250DP

  • 【Dual Voltage TIG / ARC Welder】 110V/220V 2 in 1 HITBOX welding machine, used as TIG welder or ARC MMA stick welder.The inverter frequency is up....
  • 【IGBT Inverter】This Tig welder also uses an advanced compact IGBT inverter, designed with automatic overheat and over current welding....
  • 【2T & 4T Functions】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is....
  • 【Powerful Welding Application】TIG welding thickness 0.3-5.0mm, application of Tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for....
  • 【Buy With Confidence】HITBOX offers good after-sales service. If the machine can not work or have other problem when working, please contact us at....
Check Stock