ReviewsWelding Electrodes Aws E7018

HONE Stick Welder 110V/220V Actual 140Amp ARC Welder Machine IGBT Inverter Digital Display LCD Welding Machines with Hot Start Arc Force Anti-Stick High Efficiency for 1/16 -1/8 Welding Rod.

  • ➠【Digital IGBT Inverter Technology】This ARC welder come with advaced unique IGBT control mode improves the reliability of welding machine. Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current, the pretty nice beads, specially when in small welding current..
  • ➠【Suitable for Series Welding Rod】The welder has amazing hot-start, is ideal for the rods AWS E6013 E7018 E6011 of 1/16"-1/8"(1.6mm-3.2mm), you just take the rod touching the workpiece, arc striking immediately, also can handle E6010 cellulose electrode, capable of welding mild steel, carbon steel, stainless steel and cast iron..
  • ➠【Safe and Stable】This welding machine has Anti-stick function easy the electrode removal from the workpiece, and closed-loop feedback control and multiple protection functions set internally, to prevent over heat, over current, over-voltage, under-voltage and short circuit damage to make sure safely operation..
  • ➠【Easy to Operate】The soldadora inverter 110V 220V equiped with digital display and trouble indicate, the real welding current be shown, is so easy to use that it can be used by novice or master welder. No matter is man or woman welders..
  • ➠【Portable and Support】HONE welder with ....
Check Stock

Forney 30701 E7018 Welding Rod, 3/32-Inch, 1-Pound

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
Check Stock

Midwest Tungsten Service TIG Welding Tungsten Electrodes 10-Pack Blue - 2% Lanthanated Tungsten WL20/EWLa-2 3/32

  • PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use.
  • HIGHEST RATED and most reviewed 2% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance..
  • EXCEPTIONAL for both AC & DC applications and for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corroding steels.
  • UNITED STATES based manufacturing & knowledgeable customer service staff are here to help you pick the perfect TIG tungsten for your welding job, large or small..
  • FREE materials safety data sheet (MSDS) and certificate of conformance linked below, the tungsten electrodes adhere to American Welding Society standard A5.12M/A5.12:2036.
Check Stock

Baluue TIG Welding Tungsten Electrodes Ground Finish Welding Rods Thoriated Electrodes for WP

  • lanthanated tungsten rods Multiple choices for your high-quality welding..
  • lanthanated electrode Pure Tungsten forms a clean, balled tip when heated and provide great arc stability for AC welding with a balanced wave..
  • Welding Tungsten Electrode Rod Good mechanical cutting performance, good electrical conductivity, easy operation and long service life..
  • tig tungsten Smallest electron emission, low steam pressure, low resistance and good electrical conductivity..
  • ground annealed Tungsten electrodes Pure tungsten welding electrodes also provide good arc stability for AC sine wave welding, especially on aluminum and magnesium..
Check Stock

Fox Alloy E71T-GS .030\ Flux Core Welding Wire Gasless Mig Wire - 2 Lbs Spool Welding Wire Mild Steel Filler Metal (0.8 mm)

  • 2-lb spool 0.030" gas-less E71T flux-cored ( FCW ) mild steel MIG welding wire with sturdy packaging, and comes with a 0.030'' contact tip.
  • Welding Wire E71T-GS conforms to AWS A5.20 (E71T-GS), AWS A5.36 (E71T14S-AZ-CS3), ISO 17632-A (T42 Z Z V N 1).
  • Flux core welding wire E71T-GS is self shield, no shielding gas needed, single-pass fillet and lap welding, all positional, low welding fume, minimum spatter,Smooth arc action,High feedability,Filler Metal welding wire is easy to weld in indoor and outdoor.
  • Mild steel welding wire E71T-GS is applied in welding of thin plate steel structure, i.e, doors， fence..
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

E6013 - General Purpose/Mild Steel - Welding Electrode/Rod - 14" x 1/8" (PACK: 44 LB)

  • All-position, mild steel electrode for welding light to medium-gauge steel. Common uses include tack welding on thin sheet metal such as galvanized sheets, automobile bodies, metal furniture, window frames, fences, storage tanks, farm equipment and iron grills.
  • Excellent operating characteristics when using small diameter electrodes to weld thin sheet metal using lower open-circuit AC voltage.
  • One of the easiest electrodes to use because of its easy slag control in vertical down welding, its wide operating range and restrike capabilities.
  • This electrode has a soft, steady and quiet arc that produces very little smoke or spatter.
  • Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters..
Check Stock

HUGEWELD Tig Welder TIG-200,HF TIG/Stick/Arc 2 in 1 TIG Welders,200 Amp 220V TIG Welding Machine,IGBT Inverter Portable Digital Display for Beginner

  • ✅【2 in 1 HF START】TIG200 is high frequency(HF) ignition, stable arc,simple to operate. The conversion efficiency of the whole machine is increased by more than 30%..
  • ✅【IGBT INVERTER】Use the single tube IGBT (the inverter frequency can reach 25-50KHz) to convert 50/60Hz to dc and then to high frequency and lower voltage,portable only 12.54 lbs, 13x6.3x11.4" size !.
  • ✅【2T & 4T 】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates..
  • ✅【SAFETY and ENERGY SAVING】Automatic Compensation with Voltage Fluctuation, Over-voltage protection, Under Voltage Protection, Over Current Protection, Over Load Protection,Fan dormancy..
  • ✅【EXCELLENT WELDING PERFORMANCE】 Tig welding thickness 0.5-5.0mm under 10-200A output.
  • application of tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for welding different metals such as steel, stainless steel, carbon steel etc. (Can’t weld aluminum). ARC welding thickness 2.0-8.0mm under 20-150A current , application of electrodes diameter: 2.5/3.2mm..
Check Stock

VEVOR TIG Welder 3 in 1, 110V High Frequency TIG/Stick/Clean Welding Machine w/IGBT Inverter, 155Amp Digital Arc Welder

  • High-performing 3-in-1 TIG Welder: Our welder machine has HF TIG, ARC, and a clean mode. It also comes with a TIG torch. The arc success rate of the TIG is 100%. The TIG and hand MMA welding provide an easy arc start, stable current, minimum spatter, and good shaping. Get clean and beautiful welding easily by using clean mode after welding..
  • Safety First & Overheat Protection: The unique air channel design increases the heat dissipation of the power device and control circuits. It also extends the welding time drastically. The IGBT inverter will greatly improve the performance and reliability of the 3 in 1 welder. The outstanding 60% duty cycle can also ensure long-time welding. What are you waiting for? Get ready to feel the difference!.
  • Easy-to-use Panels and Functions: The setup is marked clearly by a name and graphic representation of each knob’s function. The 2T/4T switch is available to add convenience. A gas shield set makes your welds pristine. It is simple to operate for both beginners and skilled welders..
  • Suitable Welding Thickness: Delivers a 155A current output, making the welder machine suitable for welding stainless steel, iron, mild steel, copper, and nickel. (The maximum welding thickness is 0.1″/3 mm.). Whether you are a hobbyist, ....
Check Stock

S7 200Amp MIG Welder,110V&220V 3 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine

  • ️★Multi-Function Welding Machine: IGBT Full 20-200Amp(Max) with Digital Display for reliable quality and stable performance. Suitable for MMA, Lift TIG, Flux MIG, and Gas MIG. Big enough to handle 2 to 5 pound rolls of wire..
  • ️★Powerful Welding Capability: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5 Pound Rolls Of Wire.030"(0.8mm) With Solid Core Wire, And .035" (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode.
  • ️★Complete Welding Kit: Includes MIG Gun(2.8M), Ground Clamp and Holder (2M), 220V to 110V Adapter, Drive Roller Wheel, Contact Tips, Gass Nozzles, and Welder Operation Manual. Processes recommended for MIG-Cast Iron, Copper, Brass, Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron, Copper, Brass, Titanium..
  • ️★Intuitive Synergic Design: Synergic Control with automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. The MIG-200 is capable of true lift TIG (TIG Lift Torch not included) welding as well as stick welding..
Check Stock

YESWELDER Flux Core Gasless Mig Wire Mild Steel E71TGS.030-Diameter 2-Pound Spool

  • [E71T-GS] Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld..
  • [APPLICATIONS] Excellent for outdoor windy conditions, Shielding gas is not required, All positions, Single and multi pass welding..
  • [EXCELLENT PERFORMANCE] Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance..
  • [WELDING METHODS] Vertical Welding, Flat Welding, Up Welding, Corner Welding..
  • [SPECIFICATIONS] Weight: 2lbs/Diameter: .030''(0.8mm).
Check Stock

bestarc TIG Welding Tungsten Electrode 2% Thoriated 3/32' x 7' (3/32'', Red)

  • 2% Thoriated Tungsten Electrodes for TIG Welding (Red WT20).
  • Good effect of welding stainless steel, adequate for DC welding.
  • Wide application range, suitable for welding stainless steel / carbon steel / copper / iron / nickel and other metals.
  • Longer storage time, sealed vacuum packaging to avoid oxidation.
Check Stock