ReviewsWelding Fits

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • GET THE JOB DONE: The ABN 25 Foot Acetylene / Oxygen Torch Hose Twin Pack is designed to transport oxygen and acetylene gases to your welding torch or cutting equipment for your metalworking projects.
  • Twin oxygen and acetylene torch hoses are flame retardant and suitable for indoor and outdoor use in your home, mechanics shop, or on any job site.
  • PERFECT SIZE FOR YOUR NEEDS: 25 foot torch hose length (7.6m) allows you to safely keep the tanks away from the torch tip while servicing your vehicle.
  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed ....
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

RX WELD Upgrade version Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Outfit With Portable Tool Bag

  • 【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
Check Stock

WeldForce Welding Goggles, Includes Flip Front, 2-Inch x 4-1/4-Inch, 1-Pack, Black (Model: WF-1044)

  • Ultra clear view when not in welding. No need to remove your hood to check welding results. High definition clarity in welding, see clearer weld puddle. Light blue tint in welding, decrease your eyes strain..
  • Low to High sensitivity stepless adjustable for optimal lens performance based on application. Variable shade range of 5 - 13 for personalized shade control and seamless welding application changes..
  • Fits most Pancake and Pipeliner Hoods, in some case have to modify Tigerhoods to fit. 2pcs cover lens as spare parts to protect the lens front and back..
  • The battery life is about 800 hours. Actually the battery only supply the transient power when arc initiate, we advise you store the lens in dry and very dark environment when not use and buy CR1025 batteries as spare just in case, then you could use the lens much longer..
  • 100% money guarantee. If there is any quality problems with our lens, please don’t hesitate to contact us to ask your money back or new replacement, we will provide you the most satisfactory reply within 24 hours..
Check Stock

Leaseek Welding Hood Flame-Retardant Protective Welding Cap with Neck Shoulder Drape Welding helmet accessories,Head Protection for Men & Women Black

  • 【HIGH QUALITY LEATHER 】Made from the durable and pliable, abrasion and heat resistant selected split cowhide leather, this hood is durable, stable....
  • 【CONVENIENCE】This welding hat designed to protect head , eyes and neck.Easy to Store-Can be folded easily, does not account any places..
  • 【DESIGN 】Leather outer is heat and spark proof and an inner cotton lining for maximum comfort..
  • 【QUICKLY AROUND NECK 】Velcro design for easier putting on and taking off..
  • 【WIDE APPLICATION】Welding cap fits all kinds of welding hoods and helmets. It provides good protection for welding, grinding, painting, carpentry,....
Check Stock

SÜA - Ligth Duty Welding/Brazing Torch Handle Compatible with Victor Series J + Welding Tips

  • READ THIS BEFORE YOU BUY: ***This Torch handle fits ONLY Series W-J Acetylene Tips Compatible with Victor - Series W or W-1 Tips WILL NOT FIT THIS....
  • READ THIS BEFORE YOU BUY: ***This Torch Handle has 3/8"-24 (Type "A") Hose Fittings - Twin Hoses with 9/16"-18 (Type "B") Hose Fittings WILL NOT FIT....
  • READ THIS BEFORE YOU BUY: ***Please note that this outfit WILL NOT FIT disposable oxygen and fuel gas canisters. It will ONLY fit model MC Acetylene....
  • This torch has been designed to cover the full range of light-duty welding and brazing needs. Its size and maneuverability makes it ideal for the....
  • Welding Torch Handle, Welding torch handle with 3 welding tips and a full Set that includes.
Check Stock

110V Welding Machine, IGBT Portable MMA Welder Machine Gun, 6 Variable Current Handheld Welding Machine for 1/16”-1/8” size Arc Welding Rods

  • The welding machine with IGBT inverter technology not only increases efficiency, but also reduces the weight and size of the arc welder..
  • MMA welding machine, perfect appearance, high quality internal structure, small body, light weight, energy efficient, easy to carry and use, whether you are working outdoors or indoors..
  • Multi-purpose MMA welder is versatile and suitable for repair, metal fabrication, outdoor repair, truss. Suitable for welding alloy steel, carbon steel, copper and other non-ferrous metals..
  • ARC welder fits all 1/16”-1/8” size welding rod.
  • Kit includes: 1*ARC welder, 1* Earth Clamp, 1× brush, 1*user’s manual and 1*tool pouch.
Check Stock

RX WELD 25PCS TIG Stubby Gas Lens 17GL332 3/32' & #12 Pyrex Cup & TIG Gas Lens Alumina Nozzle Kit Fit DB SR WP 17 18 26 TIG Welding Torch

  • This kit fits all 17 & 26 series air cooled torches and 18 series water cooled torches, including the Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17,DB18 and DB 26 torches, along with the Weld craft WP-17, WP-18 and WP-26 torches..
  • 2pcs 3/32" 10N24S TIG Collet and 2pcs 3/32" 17GL332 Stubby Gas Lens.
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • 4pcs #12 Pyrex Glass Cup 16mm and 10pcs Temperature Resistant O-rings.
  • 2pcs Cup Gasket and 3pcs Back Cup for Tig Welding Torch.
Check Stock

YESWELDER Mig Welding Gun Torch Stinger 15ft (4.5m) 250 Amp Replacement for Miller M-25 169598 fit Millermatic 212 & 252

  • Premium quality 250Amp replacement MIG gun stinger torch, 15-foot (4.5m) cable.
  • This gun is a direct replacement for the GA-20C, GA-21C, and M-25 169598 welding guns..
  • Use standard Miller front consumables uses the same 169 726 gas nozzle, the same 169 728 tip adapter, the same 169 729 nozzle adapter, and the same contact tips as the OEM Miller gun .030-.035(0.8-0.9MM) diameter welding wire.
  • This 15 ft long gun will handle.030-.045(0.8-1.2mm) diameter welding wire,It comes standard with a .035"(0.9mm) diameter tip in the welding gun,and one more .035 and .045 tips in the package.
  • It fits all of the following models: Millermatic 200, 210, 212, 250, 250X, 251, 252, and Vintage.
Check Stock

Welder Extension Cord 50 ft 10,000 Watts Nema 6-50 250-Volt Welder Extension Cord 8 Gauge Lighted end 8/3 Welder Extension Cord 50 amp Plug ETL Approved Welding Extension Cord 6/50 8 AWG

  • welder extension cord 8 gauge the plug is 6-50, 50amp welding extension cord 220v.
  • 40 Amps extension cord welder extension cord 50 amp plug , 8 awg extension cord 50 ft 8/3 stw 50 ft. 6-50 anti cold weather welder extension cord 50 ft.
  • welder extension cord 8 AWG UL Listed Heavy duty 8 AWG copper wire 6-50 NEMA plug and connector designed for use on all portable welders 8/3 extension cord 50 ft.
  • 8 gauge extension cord 50 ft welding machine cord with 50Amp nema 6-50 plug extension cord for heavy-duty welding tasks.
  • 8 Gauge 50 Ft Welding Cord power extension cord rated at 50A, 600V, 50 feet. Features in excellent abrasion, oil and moisture resistance and flexibility fits to extend the welding machine. It can be directly connected to your homes electrical system, extension cord 50 amp.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock