ReviewsWelding Grounding Cable Connector

WeldingCity 3-pk Dinse-Type Twist-Lock Insulated Connector Pair (Male/Female) for Welding Cable AWG #2-1/0 (35-50mm) | Pack of 3 Pairs

4 pairs of premium Dinse-type cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
Male connector is with Dinse-type pin of .355" diameter (25-mm small) and pi of 1/2" diameter (35-50mm, 50-70mm and 70-95mm)..
Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps. 3-pair per package..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
50-series (35-50mm, #2-1/0, P/N 129527/129526).
70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

RIVERWELD TIG Welding Cable Panel Connector-plug and Socket Dinse Dinze Quick Fitting 315Amp (2, DKJ35-50)

Cable Panel Connector /Euro Style Cable Connector-plug Fit all TIG Welding and Plasma Cutter Machine.
1pcs DKJ35-50 Connector with Black Color..

Check Stock

9TRADING Replacement Mig Welding Gun Stinger Torch Lead 4 Clarke 130EN 180EN Welder Parts

The gun is 10 ft long, and will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
There is a gas valve in the handle, so this gun can be used with or without gas..
The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
You can see the gas hose, trigger connector, and the welding current cable in the second picture..
This gun uses the same Clarke contact tips, gas nozzles, and gas diffusers..

Check Stock

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
Package Included:1 x Welding Ground Clamp.
Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..

Check Stock

SatelliteSale UL-Listed High Strength Copper Grounding Split Bolt Connectors Size #8, Pack of 10 Pieces

SatelliteSale UL-Listed High Strength Copper Grounding Split Bolt Connector links two or more copper wires together without crimping or additional tools. It ensures high mechanical strength, maximum conductivity, and low resistance..
Our Grounding Split Bolt Connector is made of top-grade, high copper alloy and highly resistant to oxidation, making them perfect even for severe weather conditions..
It is commonly used with copper and other conductors, grounding, and bonding applications. The grounding split bolt connector Size #8 handles a wide range of wires, starting from 8 AWG to 16 AWG..
Our high-grade copper connectors are UL-approved for copper and copper-weld stranded wires..
It comes in a pack of 10 pieces, and all SatelliteSale products are ensured with an unbeatable lifetime warranty!.

Check Stock

ABN L5-50R Connector – 50 Amp Twist Lock Inlet Locking Power Cord Connector Locking Power Inlet Plug 50A 125/250V

CONNECT YOUR CABLE: Use your generator, transfer switch, welding equipment, trailer, RV camper power inlet with this ABN Inlet Locking Connector.
KEEP OUT PESTS: Replace your power cord with this twist lock connector so the cord can be removed and stored without leaving an opening that mice or....
SECURELY HOLD CABLE: This connector comes with strain reliefs that mount inside the base of the connector to hold the cable (clamp for the cord).
PERFECT SIZE: Approximate measurement across the face is 2 inches (5.1cm).
Across the back where the cord enters adds 0.25 inch (2.25 inches / 5.7cm....
Remove housing by loosening face screws and slide over cable (If a weather-resistant boot is used, slide this over....

Check Stock

150 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock

BAYTORY Upgrade Magnetic Welding Support Ground Clamp Tools, Welding Magnet Head Strong Magnetism Large Suction, Copper Tail Welding Accessories Stability Clamps

Check out this handy Fix-tite Magnetic Welding Ground Clamp. A device that speeds up grounding chores for welders..
NO-HASSLE SAFETY SETUP - You no longer have to waste your time finding, placing or removing a ground point for a welding job. This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
STRONG MAGNETIC GRIP - This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Now that you've got this, you won't have to take minutes searching for a good ground or attaching grounding tabs..
OFFERS CONVENIENCE - Sometimes you're faced with a welding job that has limited options for ground points. You don't want to have to damage a car's paint job simply to affix a safety line. This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
Material: Copper / insulation board. Durable and solid.With copper tail with good welding stability..

Check Stock

Amico ARC-160D, 160 Amp Stick ARC IGBT Inverter DC Welder 115/230 Dual Voltage Welding Soldering

ARC-160 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
the strength of its components makes it a reliable work tool for professionals or individuals. Package includes 7 feet of power cord, 10 feet of 300-Amp electrode holder assembly, 10 feet of 300-Amp grounding clamp assembly, and a 230V to 115V power adapter..

Check Stock

200 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..

Check Stock