ReviewsWelding Joint Magnets

316 Stainless Steel Compression Tube Fitting Union Straight Adapter Tube Double Ferrule Pipe Fitting Adapter for Pipe 2Pcs Ф1/2

  • 【316 Stainless Steel】 The double ferrule pipe fitting adapter adopt high-quality stainless steel 316 material,the inspection indicators are in line with the standard guaranteed spectrometer..
  • 【Good peformance without welding】The product has simple and firm connection, good sealing, no need for welding, high pressure resistance and vibration resistance..
  • 【Easy to clean】The surface of the joint is finely polished by a special process, the hand feels good and delicate, and the interior is clean and bright..
  • 【Suitable for complicated pipeline connections】Suitable for some complicated pipeline connections that cannot be welded, and can pass through gas, liquid, oil and general corrosion pipeline systems..
  • 【Comply with national standard】 The double ferrule straight‑through joint is a relatively common national standard joint, which serves as a connection between steel pipes..
Check Stock

Spurtar 6pcs Welding Magnet Welding Magnets and Clamps 75lbsX2+50lbsX2+25lbsX2 Magnetic Welding Holder 3 4 5 Arc Welding Electrode Holders 45 90 135 Degree Mig Welder Welding Accessories and Tools

  • STRONG POWER: 6 pieces different sizes welding magnet supports any ferrous metal object up to 25 lbs, 50 lbs, 75 lbs, satisfying all kinds of needs.
  • SAFE & SECURE: These welding magnets and clamps grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel welding magnet square supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: The magnetic welding holder clamps connects parts, freeing up your hands for efficient work and improve work safety, and it can also be used as a floater to separate steel plates.
  • EFFICIENCY: Spurtar Welding Magnet Set Magnetic Tool Holder s ideal welding tools and accessries for being used as holder and positioner in welding, soldering, marking off, pipe installation, making your welding job more efficiently and precisely..
Check Stock

4 Pcs 3 28 lbs Welding Magnets Strength Strong Welding Magnetic Clamps Arrow Holder Metal Working Mig Tools and Equipment 45 90 135 Degree Angle Magnet

  • STRONG POWER: SHANGHUI Angle Welding Magnet can hold and support any ferrous metal objects up to 28 lbs. These heavy-duty arrow magnets stick solidly....
  • SAFE & SECURE: These welding holders grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with....
  • THREE ANGLES: The powerful magnetic angle welding tools with an arrow design supports material at 45°, 90°, and 135° for easy access and allow you....
  • MULTIPURPOSE: The magnet welder tools are convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling,....
  • Regarding service: SHANGHUI Magnet provides unconditional return and exchange of goods in question. If you need help, please contact us by email, and....
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Hordion 50mm Concrete Hole Saw SDS Plus Shank Hole Saw Cutter with 202mm Connecting Rod Drill for Cement Brick Wall

  • Package Includes: 1 x 2" hole saw cutter, 1 x 7.95" connecting rod, 1 x 0.28" drill bit, 1 x screw.
  • Industrial Grade Material: Made of high-quality YG8C alloy, which is very durable and impact resistant. At the same time, using high-frequency welding technology, the welding joint is very firm, the inner and outer welding joints are smooth, the joint is accurate, and the cutting is more perfect and precise.
  • SDS Plus Shank Design: The connecting rod handle adopts SDS PLUS design, and the male thread adapter is convenient to be used with the round shank four-pit electric impact drill.
  • Widely Used: Easy to use, quick to drill, very suitable for installation of air conditioners, water heaters, water pipes, smoke exhaust pipes, sewer pipeline hole open, etc.. Mainly engaged in the opening of red bricks, cement and other wall brick structures.
  • 100% Guarantee: If you are not satisfied with the product, you can get a full refund within 90 days, just contact us. We guarantee you a 100% satisfied shopping experience at Hordion Amazon Store..
Check Stock

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

  • HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
  • MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
  • EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
  • PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
  • WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Welding Kit - Lap Joint Trainer Pyramid - 11 Gauge Steel Squares - Practice Training DIY - MIG TIG Stick Gas Arc Weld Other Squares

  • Get Straight to the Good Stuff... Welding.
  • Save Time Sourcing, Cutting and Preparing Practice Materials.
  • The Largest Square is 4" Wide. This Kit Packs Nearly 100 Inches of Lap Joint Welding!.
  • This Inexpensive Kit Welds Inside and Outside to Maximize Your Welding Practice per Dollar.
  • Laser Cut in the USA with USA Steel... Because it Matters.
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Durable, Jackson Safety Contour Magnetic Burning Guide, Welding Accessory

  • The Jackson Safety #28 Magnetic Burning Guide provides a strong, durable straight edge while using a burning torch or plasma cutter.
  • This is a precise tool used in structural thermal cutting and layout. It's a must-have on your list of pipe welding tools.
  • It features Three 30-pound pull cast-in magnets to let you use it in any position, and has a 24-inch blade on a raised plane.
  • This dependable, 18"L welding accessory is made of durable material to withstand heat and spatter.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock