ReviewsWelding Line

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

SUPER DEAL PRO Commercial MIG 130 AC Flux Core Wire Automatic Feed Welder Welding Machine w/Free Mask 110V

  • ★ SUPER DEAL MIG130 Welder is a top of the line household welder that is lightweight, powerful and intuitive. Made of high-class PVC material as well as delicate treatment, this welding machine integrates comfortable grip, easy operation and high precision..
  • ★ Uses convenient Flux - Cored wire, self release metal-inert gas while welding, prevent oxidation of the welded part..
  • ★ User-friendly interface - Makes set-up a snap with easy to access advanced options. SUPER DEAL mig130 gives you the power to tackle the biggest jobs with ease and confidence. Ready to weld out of the box..
  • ★ Variable Feed Speed Control - Easily adjust current flow by adjusting the 4 buttons for MIN/MAX,1/2. Also features a wire feeding speed adjust rotary knob. 10 levels of wire feeding speeds for your choice. Torch With Full On / Off Safety Control.
  • ★ Compact and powerful - Weighs only 38 lbs. deal for shop, home or field use. Perfect for welding mild steel and stainless steel. Comes with a reel of 0.9mm, 0.55lbs welding wire, a protection mask and a brush/Chipping Hammer. 2.5M Torch, xtra 2 Tips and Ground Cord. Just what you're looking for, right?.
Check Stock

Fullkk Magic High Temperature Resistant Liquid Metal Welding Filler, Appliances Casting Repair Glue, Metal Repair Gel Paste (1 Set(A+B), 20g)

  • 【Liquid Metal Welding Filler】: Developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It will bond almost any clean surface that is free of dirt and oil..
  • 【Castings Repair Glue】Mainly used for iron and steel casting, sand holes and holes, and casting defects such as cracks. It can be used to repair fuel tanks, pipes, concrete breaks, and a whole set of more..
  • 【High-Temperature Resistance】Welding glue for metal, can withstand a temperature of 150°C. When fully cured, it is as hard as iron and provides uniform bond line thickness..
  • 【Simple To Use】A permanent adhesive is formed after mixing, which can be shaped, beaten, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, 6 minutes setting, and complete curing within 4-6 hours. Before using the glue, clean and dry the surface and finish the work within 20 minutes after mixing..
  • 【Do it Yourself】Big or Small, you can DIY it with this magic welding glue. Our heavy-duty epoxy and adhesives repair & restore it right the first t....
Check Stock

Spot Welder, Seesii 11000mA-h Battery Spot Welder with LCD Screen Upgraded Enhanced 80 Gears Adjustable Portable Mini Spot Welder with 2x5M Nickel Sheet & 4X4 Holder For Making Battery Packs

  • ... weld nickel strips with a thickness of 0.2mm)..
  • ✅【80 Levels of Adjustable Output】: Our Seesii spot welder SE-002 with 80 levels output power adjustable,it can be adjusted 1-8 and 1.1-5.4-8.0 levels according to your different needs,very fine adjustments can make the welding more precise and the spot welding effect more perfect.If you are a new learner you can adjust the delay time to delay the automatic weld time( 1-5s）, it’s very friendly for the beginner..
  • ✅【LCD Visible Screen Display】: Our spot welder for battery is 2022 newly designed with visible colorful LCD Screen, can clearly know the remaining battery, delay time, temperature and gear level of the spot welder.The working condition of the product can be understood at a glance through the screen,make your spot welding journey easier and safer..
  • ✅【Intelligent and Safe to Use】:The 18650 spot welder kit equipped with the upgraded chip, so that the use of electric welding is more in line with human nature. When the temperature is higher than 60℃/140°F, the spot welder will automatically stop working to avoid damage to personnel or items.Note: Af....
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

KEWAYO Taper Gage 1/32-5/8 Inch 1-15mm Stainless Gap Hole Taper Welding Gauge Test Ulnar Inch & Metric

  • For measuring of cylindrical bores, hole, gap size, welding gap measure.
  • Made of stainless steel, miniature and light weight, pocket size.
  • Both Metric and Stadard reading | Welding taper gauge: 1-15mm (1/64-5/8 inch).
  • Polished, bright and clean without burr, rust laser engraved line and will not rub off.
  • Accurate figures and increments are etched into surface, easy to read.
Check Stock

RX WELD Upgrade version Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Outfit With Portable Tool Bag

  • 【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
Check Stock

JRYX Fullkk Liquid Metal Filler, 2022 New Fullkk Magic High Temperature Resistant Liquid Metal Welding Filler, Appliances Casting Repair Glue, Versatile Dependable Liquid Metal Welding Filler (100g)

  • Liquid Metal Welding Filler: Developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It will bond almost any clean surface that is free of dirt and oil..
  • Metal Repair Paste High-Temperature Resistance: Welding glue for metal, can withstand a temperature of 150°C. When fully cured, it is as hard as iron and provides uniform bond line thickness..
  • Simple to Use: A permanent adhesive is formed after mixing, which can be shaped, beaten, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, 6 minutes setting, and complete curing within 4-6 hours. Before using the glue, clean and dry the surface and finish the work within 20 minutes after mixing..
  • Usage Scenarios: Surface applications: metal, plastic, pvc, concrete, wood, ceramic and tile and fiberglass. Use on: household, automotive, marine, plumbing, crafts, outdoor equipment, agricultural equipment, motorcycle, toys, boats, personal watercraft, in/outboard engines and deck and hull accessories..
  • Do It Yourself: No matter the gap is big or small, you....
Check Stock

Oxygen Acetylene Torch Kit Oxy Gas Welding Cutting Brazing Set Portable Welder Tool Nozzles Regulator Hose Gauges Blue Case

  • ...trong and durable and can extend the life of the appliance. The workmanship is fine, does not scratch the palm, and is easy to grasp, improving the customer's experience of using it..
  • [15PCS TORCH KIT] The cutting torch kit features four nozzles (1 cutting tip & 3 welding tips), installed the tips you need, and the regulator easily adjusts the gas flow to make your equipment perform at its best.
  • The torch set includes a blue heavy-duty plastic blow molded carrying case for easy transport and storage..
  • [SIMPLE OPERATION] The oxygen acetylene regulator in the acetylene torch kit can help you adjust the PSI to the necessary position.
  • once you have ignited and adjusted to a neutral flame, move the torch tip slowly along the cut line until the metal is completely separated..
  • [USAGE SCENARIO] The torch set is ideal for a wide variety of applications such as construction sites, fabrication repair, automotive, general maintenance work, metal engraving, metal cutting, and more, ideal for the amateur metal worker or seasoned professional..
  • [PACKAGE INCLUDE] The oxygen acetylene torc....
Check Stock

QIRLOEU Motorcycle Gifts for Men, Vintage Motorcycle Decor; Handmade Metal Motorcycle Model Kit, Gifts for Motorcycle Lovers or Riders, Large

  • 【Handmade】Manual stamping, sanding, welding, coloring, attrit, just to show the traces of "old years".
  • 【Antique Craft】 Rough welding process craft reflects the flamboyant personality, this is the style that the production line can't produce..
  • 【Decoration ＆ Gift】Whether it is used as an room decoration or a gift, it is a good choice..
  • 【Size】11.5inch(L) * 3.5inch(W) * 5.5inch(H).
  • 【Note】Not suitable for age under 13..
Check Stock