ReviewsWelding Nozzle Cleaning Needle

Sooprinse High Pressure Washer Sewer Jetter Kit , Button Nozzle and Rotating Sewer Jetting Nozzle, Pressure Washer Sewer Washer Kit, 50FT Drain Cleaning Hose, 3000 PSI

  • ❤【Professional cleaning kit】The sewer jetter kit include 50 FT sewer jet hose, two orifice 4.5 rotating sewer jet nozzle, orifice 4.0 button nose sewer jetter nozzle, corner sewer nozzle, M22 female to 1/4 inch female NPT coupler, Teflon tape and nozzle cleaner .Complete sewer jetter kit to meet your variety need..
  • ❤【Durability】The inner pipe of the water pipe is a high-quality thermoplastic polyester pipe, the reinforcement layer is composed of chemically bonded 1/4 inch high-strength polyester textile braid, and the outer layer is also a thermoplastic polyester pipe, which can effectively deal with wear, ozone, exposure, oil Impact, thereby extending the life of the product..
  • ❤【Scientific Design】The button nozzle has one front nozzle at 0° to remove blockages, and three rear nozzles at 33° to wash away loose debris from the front nozzle.The rotating nozzle rotates the three rear nozzles at 33° for shot peening, sprays water into the blocked pipe, rinses and removes debris. Corner sewer jetter nozzle: water sideways to clear blockages at the corner, 6 rear jets for more powerful cleaning..
  • ❤【Special Improvement】We provide you with a Teflon tape that can be wrapped around the water pipe to prevent leakage during use. A nozzle ....
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • Nozzle Cleaning Kit: you will get 32 ​​MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock

High Power Paint Sprayer W/8pcs Nozzles& 3 Spray Patterns 800ml Container HVLP Electric Paint Spray Spraying Gun Detachable Container for Painting Furniture, Fence, Car, Bicycle, Chair

  • ...ut speed can be adjusted by control valve knob on the sprayer. Paint powerfully in a large area and slowly in a narrow space. It is suitable for edges, corners, and broad interior surfaces of various work and DIY projects..
  • 【Detachable Design,Easy to Clean】--All parts of the machine are detachable,convenient for cleaning and washing the nozzle. Comes with a cleaning brushes and a clogging needle to unclog any hardened paint left in the machine. After every spraying job done, you should clean the sprayer gun in time to prevent the dried paint from blocking the hole..
  • 【Humanized Design to Provide Power& High Efficiency】-- CtopoGo paint sprayer is equipped with 2M long power cord, which is long enough to allow you to move in a larger area. Adjusting the flow control knob to obtain different density of paint output. A viscosity funnel cup is provided to measure the viscosity of the paint. The rear foam pad can prevent paint from flowing backwards to block the nozzle. All-copper powerful motor to provide power& high efficiency..
  • 【Package Includes】--1x Paint Sprayer, 1x 800ml Container, 8x Nozzles(sizes 1.5mm*2Pcs /2.0mm*2Pcs/2.5mm*2Pcs/3.0mm*2Pcs), 1x Viscosity Cup , 1x Nozzle Cleaning Needle, 1x Cleaning Brush, 2x Rings, 1x User Manual..
Check Stock

20PCS 0.4mm MK8 Nozzles 3D Printer Extruder Nozzles + 10PCS Stainless Steel Nozzle Cleaning Needles with 2PCS Wrenches and Tweezers for Makerbot Creality CR-10 Ender 3 5

  • Package Include: This 3D printer nozzle set come with 20pcs 0.4mm printer nozzles, 10pcs 0.35mm nozzle cleaning needles, 1pcs curved tweezers, 1pcs socket wrench and 1pcs flat wrench.
  • Cleaning Needles: The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
  • Premium Material: Our MK8 extruder nozzles are made of high quality brass material. Heavy duty and durable to use for a long time. Easy to install and change.
  • Applicability and Compatibility: These MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
Check Stock

Beyondlife Plastic Hot Air Welder Heating Gun PVC Vinyl Rod Welding Hot Gas Pistol Tool 1600W

  • This plastic welder gun is sturdy and very durable,less than 3 lbs,very lightweight and compact.
  • The welding gun kit will produce a jet of hot air that softens the parts to be joined, as well as the plastic filler rod,a very professional tool.
  • The temperature and power of this hot air gun are both adjustable for different melting points,giving you the versatility to work with a wide variety of plastic materials.
  • This plastic welder heat gun is good for repairing plastic items like truck curtains, tarpaulins, swimming pool linings / membranes, water tanks, kayak, vinyl flooring, car bumpers etc. A useful tool for every panel welder..
  • Comes complete with a spare heating element,1x 40mm flat slit nozzle1x Pencil Tip Nozzle, 1x triangle speed welding nozzle, 1x round speed welding nozzle, 1x pressure silicon roller ,1x manual and some PE& PVC plastic rods.
Check Stock

Soldering Tip Cleaner, Soldering Iron Tip Cleaner and Cleaning Copper Wire Ball Kit, Wipe the Soldering Iron and Soldering Iron Tip with Clean Copper Wire Ball, No Water is Needed

  • HIGH QUALITY: Soldering Tip Cleaner use low-wear stainless steel housing, cleans tip no water required,re-usable with refills.
  • FLOPPY COILED SOLDERING IRON TIP: Solder Tip Cleaning Wire used to remove the solder on the surface of the soldering iron tip and clean the oxidation products, thereby extending the service life of the tool.
  • NO NEED TO ADD WATER: avoid the welding nozzle cooling, the tin balls will not spray out, improve the welding efficiency.
  • USES: widely used in electric welding, electrical maintenance, welding parts, etc..
  • NOTE: When replacing the steel wire in the cigarette holder, please wear gloves, be careful not to sprinkle solder, please open the box vertically.
Check Stock

BADGER Model 105-7 Patriot Fine Airbrush Set

  • The Model 105-7 "Patriot" contains a dual action gravity feed Patriot airbrush with braided air hose and instruction manual..
  • The Patriot's innovative and efficient precision design is enjoyed by crafters, artists, and hobbyists.
  • Single (.5) needle/nozzle for spraying all Mediums, inks, dyes, watercolors, enamels, lacquers, glazes, and acrylics - including Air-Opaque, Spectratex, MODELflex, Minitaire and Stynylrez primers..
  • Easy maintenance self- centering nozzle design.
  • Acute tapered color well for faster cleaning.
  • Maximum angle trigger clearance and stroke.
  • Patented easy access needle removal system.
  • Badger Airbrushes are American Made. One year craftmanship warranty and lifetime labor warranty on factory service/repair.
Check Stock

Badger Air-Brush Co 155-7 Anthem Airbrush Complete Set

  • The Model 155-7 airbrush set features the "Anthem" with a Single needle/nozzle design which sprays pencil lines to 3-inch (76millimeter) spray pattern.
  • includes air hose jar, extra jars, color cup, cap, and manual in a storage box.
  • The Anthem’s body design provides exacting balance and long term user comfort for hobbyists, artists, crafters, T-shirt painters, body painters, taxidermists, sign and automotive painters.
  • Dual action, internal mix, siphon (bottom) feed.
  • Single needle/nozzle for spraying all mediums, inks, dyes, watercolors, acrylics, enamels, lacquers, glazes, latex, Air-Opaque, Air-Tex, SpectraTex, MODELflex TotallyTattoo and Totally Tan colors.
  • fastest patented needle release on the market.
  • easy maintenance and cleaning with finger tight assembly tolerances and minimal spare parts to stock. Provides flawless performance in the most rigorous airbrushing environments.
Check Stock

Dramm Nozzle Jets, Green 15004 ColorStorm Premium Metal Oscillating Sprinkler with Brass

  • Includes a needle-plug for easy cleaning. Adjustable dial and tab delivers various water patterns and spray distances for lawn care and kids water fun.
  • Variable settings allows watering up to 3, 036 sq. Ft. 18 heavy-duty brass nozzle jets provide uniform watering.
  • Heavy duty rubber coated aluminum hose connector.
  • Variable settings allows watering up to 3,036 sq. ft. (66 ft x 46 ft).
  • Heavy-duty brass jet holes with nozzle needle for simple clean-up.
  • Available in six rainbow colors: red, orange, yellow, green, blue, and berry.
Check Stock

Keadic 10 Inch Scratch Wire Brush Slag Removal Tools, including 10 Inch Welding Chipping Hammer with Coil Spring Handle, Wire Brush & Welding Gloves/Fireplaces Golves

  • ...s gauge, 1 piece round dual sided wire gauge and this pack comes with protective gloves, please wear this before operation! These tools will surely help a lot for your welding job. Easy to remove and clean corrosion and slag and rust, saving time and energy during your work, very easy to use, long-lasting and quick cleaning..
  • ✅【SCRATCH WIRE BRUSH】You need a good wire brush！This wire brush is simple operation, durable brush. It is used for polished and polishing and removing slag and welding residue. Concave-convex design, high brush density, less loss of the wire. Made of stainless steel bristles, strong and thick wire, not easy to fall off, featuring super toughness, not easy to deformation, bristles are neat and not easily deformed. It is very durable for a long term use..
  • ✅【WELDING CHIPPING HAMMER】Professional welding tool! Shockproof tool! Made of carbon steel, heat treatment, high hardness and toughness, it is designed for welding work and it is wear resistant. With spring loaded design, its spring handle for comfortable hand feel and reduce the impact force..
  • ✅【MULTI-USE WELDING PLIERS】You will find this pliers very useful in many uses. The nozzle end for easy grip of big chunk of residue. It could use as a hammer as it is very....
Check Stock

45 Pieces 3D Printer Tools Kit, YEETIN 3D Printing Accessory Includes Deburring Tool, Digital Caliper, Art Knife Set, Tube Cutter, Storage Bag Suitable for 3D Print Removing, Cleaning, Finishing

  • ...plify your experience for a faster and better workflow. With all the tools in this kit, successfully making and handling 3D prints has never been easier and faster.
  • 45 Pieces SET: product includes 1 set of deburring tools(1 pc NB1100 deburring tool handle & 6 pcs deburring blades), Electronic Digital Caliper, 10 pcs Cleaning Needles, Art knife set(14 pcs blades and 1 pc handle), Long nose pliers, Flush cutters, 3 pcs wire brush, Nozzle cleaning kit, Tube Cutter, 2 print removal spatula, needle file, Cutting Mat, Glue stick and storage bag.
  • FOR REFINED POST-PROCESSING: YEETIN 3D Printing Tool Kits entail multiple tools specifically chosen and proven to refine your 3D printing, use the nozzle cleaning kit to remove small blockages in the nozzle, calipers and needle files for precise measurement, as well as a deburring tool and art knife blades for fine post-processing.
  • EXCELLENT PACKAGE：All of these essential tools are packed in a travel-size tool pouch that allows you to easily store and carry them, and also prevents them from getting lost.
  • GIFT IDEA FOR 3D PRINT MAKER: We have chosen quality tools for this kit based on the experience of 3d printing enthusiasts and our staff, even novice or professional 3d printmaker will love this product.
Check Stock